From: beyler olivier <olivier.beyler@orange-ftgroup.com>
To: linux-bluetooth@vger.kernel.org
Subject: PIN code pb
Date: Tue, 21 Jun 2011 18:31:17 +0200 [thread overview]
Message-ID: <4E00C755.1070501@orange-ftgroup.com> (raw)
Hi,
I've try to connect to the Serial Port Device
hcitool scan
Scanning ...
00:03:C9:74:AA:90 n/a
00:0F:B3:91:1C:70 G-NC6000-95
00:15:0E:E2:3E:21 n/a
00:18:B2:00:0B:83 Serial Port Device
./simple-agent hci0 00:18:B2:00:0B:83
Creating device failed: org.bluez.Error.AuthenticationRejected:
Authentication Rejected
The pin code is normaly "0000" but I don't know where to put it.
I try many answers without succed when I use minicom
minicom: cannot open /dev/rfcomm0 : the Connection refused
and on the hcidump I see this log :
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Read Remote Supported Features (0x0b) plen 11
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
< ACL data: handle 1 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Info rsp: type 2 result 1
Not supported
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Remote Name Req Complete (0x07) plen 255
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1013
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 32772
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 32772
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: QoS Setup Complete (0x0d) plen 21
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1008 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 1008 max_retrans 0 credits 1
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: PIN Code Request (0x16) plen 6
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
> HCI Event: Command Complete (0x0e) plen 10
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
> HCI Event: Command Complete (0x0e) plen 10
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
Best regards
reply other threads:[~2011-06-21 16:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E00C755.1070501@orange-ftgroup.com \
--to=olivier.beyler@orange-ftgroup.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).