Re: [PATCH] Bluetooth: Add support for Broadcom BCM20702A0.

[Jesse Sung <jesse.sung@canonical.com>]

On 09/21/2011 03:53 PM, Marcel Holtmann wrote:
> Hi Jesse,
>
>> btusb would not take care of this device without its id in the table.
>>
>> If the output of usb-devices is still needed, please let me know.
>
> yes, I just wanna see usb-devices and not go through 3 pages of verbose
> lsusb output since that is not helping me.

Hi Marcel,

usb-devices output:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8197 Rev=01.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=D0DF9AA9C9F1
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Thanks,
Jesse