Re: [PATCH] Bluetooth: Add support for Broadcom BCM20702A0.

[Jesse Sung <jesse.sung@canonical.com>]

On 09/21/2011 10:57 PM, Jesse Sung wrote:
> On 09/21/2011 03:53 PM, Marcel Holtmann wrote:
>> Hi Jesse,
>>
>>> btusb would not take care of this device without its id in the table.
>>>
>>> If the output of usb-devices is still needed, please let me know.
>>
>> yes, I just wanna see usb-devices and not go through 3 pages of verbose
>> lsusb output since that is not helping me.
>
> Hi Marcel,
>
> usb-devices output:
>
> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=413c ProdID=8197 Rev=01.12
> S: Manufacturer=Broadcom Corp
> S: Product=BCM20702A0
> S: SerialNumber=D0DF9AA9C9F1
> C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> Thanks,
> Jesse

Hi Marcel,

If there's any other info needed, please kindly let me know.

Thanks,
Jesse