On 27-12-11 21:30, Gustavo Padovan wrote:

> Seems your extfeatures is telling you something different from what it really
> supports. Can you try with the following diff (use the dynamic debug that Andre
> told you)

Attached. The result is "features: 0xff".

I suppose that (should) mean(s) "all features"; if that's not actually a 
valid possibility due, perhaps, to undefined or mutually exclusive bits 
then maybe it's an option to take 0xff to mean that the adapter doesn't 
in fact support any of them?

> Also the output of hcidump would nice.

If the below (which is what hcidump spit back at me at some as far as I 
could determine random moment) is not what you wanted, I believe you 
will need to specify which action to take while monitoring things with 
hcidump.

==============
HCI sniffer - Bluetooth packet analyzer ver 2.1
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Reset (0x03|0x0003) plen 0
 > HCI Event: Command Complete (0x0e) plen 4
     Reset (0x03|0x0003) ncmd 1
     status 0x00
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
 > HCI Event: Command Complete (0x0e) plen 12
     Read Local Supported Features (0x04|0x0003) ncmd 1
     status 0x00
     Features: 0xff 0xfe 0xff 0x7e 0x98 0x19 0x00 0x80
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
 > HCI Event: Command Complete (0x0e) plen 12
     Read Local Version Information (0x04|0x0001) ncmd 1
     status 0x00
     HCI Version: 2.0 (0x3) HCI Revision: 0x2da
     LMP Version: 2.0 (0x3) LMP Subversion: 0x2da
     Manufacturer: Integrated System Solution Corp. (57)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
 > HCI Event: Command Complete (0x0e) plen 11
     Read Buffer Size (0x04|0x0005) ncmd 1
     status 0x00
     ACL MTU 1021:4 SCO MTU 48:10
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
 > HCI Event: Command Complete (0x0e) plen 10
     Read BD ADDR (0x04|0x0009) ncmd 1
     status 0x00 bdaddr 00:11:67:C0:12:9E
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
 > HCI Event: Command Complete (0x0e) plen 7
     Read Class of Device (0x03|0x0023) ncmd 1
     status 0x00 class 0x000000
< HCI Command: Read Local Name (0x03|0x0014) plen 0
 > HCI Event: Command Complete (0x0e) plen 252
     Read Local Name (0x03|0x0014) ncmd 1
     status 0x00 name 'ISSCEDRBTA'
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
 > HCI Event: Command Complete (0x0e) plen 6
     Read Voice Setting (0x03|0x0025) ncmd 1
     status 0x00 voice setting 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1
     type 0 condition 0
     Clear all filters
 > HCI Event: Command Complete (0x0e) plen 4
     Set Event Filter (0x03|0x0005) ncmd 1
     status 0x00
< HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2
     timeout 32000
 > HCI Event: Command Complete (0x0e) plen 4
     Write Connection Accept Timeout (0x03|0x0016) ncmd 1
     status 0x00
< HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
     bdaddr 00:00:00:00:00:00 all 1
 > HCI Event: Command Complete (0x0e) plen 6
     Delete Stored Link Key (0x03|0x0012) ncmd 1
     status 0x00 deleted 0
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
     Mask: 0xfffffbff07180000
 > HCI Event: Command Complete (0x0e) plen 4
     Set Event Mask (0x03|0x0001) ncmd 1
     status 0x00
< HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
 > HCI Event: Command Complete (0x0e) plen 68
     Read Local Supported Commands (0x04|0x0002) ncmd 1
     status 0x00
     Commands: ffffef03ceffffffffffff9ff30fe8ff3c
< HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1
     mode 1
 > HCI Event: Command Complete (0x0e) plen 4
     Write Inquiry Mode (0x03|0x0045) ncmd 1
     status 0x00
< HCI Command: Read Local Extended Features (0x04|0x0004) plen 1
     page 1
 > HCI Event: Command Complete (0x0e) plen 14
     Read Local Extended Features (0x04|0x0004) ncmd 1
     status 0x00 page 0 max 0
     Features: 0xff 0xfe 0xff 0x7e 0x98 0x19 0x00 0x80
< HCI Command: Write Default Link Policy Settings (0x02|0x000f) plen 2
     policy 0x07
     Link policy: RSWITCH HOLD SNIFF
 > HCI Event: Command Complete (0x0e) plen 4
     Write Default Link Policy Settings (0x02|0x000f) ncmd 1
     status 0x00
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0
==============

Rene.