* [PATCH v8 01/13] Heart Rate Profile (HRP) client API
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 02/13] heartrate: Add initial HRP client support Andrzej Kaczmarek
` (12 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Santiago Carot-Nemesio
From: Santiago Carot-Nemesio <sancane@gmail.com>
---
doc/heartrate-api.txt | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 doc/heartrate-api.txt
diff --git a/doc/heartrate-api.txt b/doc/heartrate-api.txt
new file mode 100644
index 0000000..1fa9d0b
--- /dev/null
+++ b/doc/heartrate-api.txt
@@ -0,0 +1,84 @@
+Heart Rate API description
+****************************************
+
+Copyright (C) 2012 Santiago Carot-Nemesio <sancane@gmail.com>
+Copyright (C) 2012 Tieto Poland
+
+Heart Rate Manager hierarchy
+============================
+
+Service org.bluez
+Interface org.bluez.HeartRateManager
+Object path [variable prefix]/{hci0,hci1,...}
+
+Methods RegisterWatcher(object agent)
+
+ Registers a watcher to monitor heart rate measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ UnregisterWatcher(object agent)
+
+ Unregisters a watcher.
+
+Heart Rate Profile hierarchy
+============================
+
+Service org.bluez
+Interface org.bluez.HeartRate
+Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+Methods dict GetProperties()
+
+ Returns all properties for the interface. See the
+ Properties section for the available properties.
+
+ Reset()
+
+ Restart the accumulation of energy expended from zero.
+
+ Possible Errors: org.bluez.Error.NotSupported
+
+Properties String Location (optional) [readonly]
+
+ Possible values: "Other", "Chest", "Wrist","Finger",
+ "Hand", "Earlobe", "Foot"
+
+ boolean ResetSupported [readonly]
+
+ True if energy expended is supported.
+
+Heart Rate Watcher hierarchy
+
+============================
+Service unique name
+Interface org.bluez.HeartRateWatcher
+Object path freely definable
+
+Methods void MeasurementReceived(object device, dict measurement)
+
+ This callback is called whenever a heart rate
+ measurement is received from the heart rate device.
+
+ Measurement:
+
+ uint16 Value:
+
+ Measurement value expressed in beats per
+ minute (bpm)
+
+ uint16 Energy (optional):
+
+ Accumulated energy expended in kilo Joules
+
+ boolean Contact (optional):
+
+ true if skin contact is detected by sensor,
+ false otherwise
+
+ array{uint16} Interval (optional):
+
+ RR-Interval values which represent the time
+ between two consecutive R waves in an ECG.
+ Values are ordered starting from oldest to
+ most recent.
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 02/13] heartrate: Add initial HRP client support
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 01/13] Heart Rate Profile (HRP) client API Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 03/13] heartrate: Add attio callbacks Andrzej Kaczmarek
` (11 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Rafal Garbat
From: Rafal Garbat <rafal.garbat@tieto.com>
This patch adds initial support for the Heart Rate Profile client.
Profile driver is registered to keep track of adapters and devices.
---
Makefile.am | 9 ++-
lib/uuid.h | 2 +
profiles/heartrate/heartrate.c | 165 +++++++++++++++++++++++++++++++++++++++++
profiles/heartrate/heartrate.h | 26 +++++++
profiles/heartrate/main.c | 52 +++++++++++++
profiles/heartrate/manager.c | 80 ++++++++++++++++++++
profiles/heartrate/manager.h | 24 ++++++
7 files changed, 356 insertions(+), 2 deletions(-)
create mode 100644 profiles/heartrate/heartrate.c
create mode 100644 profiles/heartrate/heartrate.h
create mode 100644 profiles/heartrate/main.c
create mode 100644 profiles/heartrate/manager.c
create mode 100644 profiles/heartrate/manager.h
diff --git a/Makefile.am b/Makefile.am
index 372111a..808a81f 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -211,7 +211,7 @@ endif
if GATTMODULES
builtin_modules += thermometer alert time gatt_example proximity deviceinfo \
- gatt
+ gatt heartrate
builtin_sources += profiles/thermometer/main.c \
profiles/thermometer/manager.h \
profiles/thermometer/manager.c \
@@ -240,7 +240,12 @@ builtin_sources += profiles/thermometer/main.c \
profiles/deviceinfo/deviceinfo.c \
profiles/gatt/main.c profiles/gatt/manager.h \
profiles/gatt/manager.c profiles/gatt/gas.h \
- profiles/gatt/gas.c
+ profiles/gatt/gas.c \
+ profiles/heartrate/main.c \
+ profiles/heartrate/manager.c \
+ profiles/heartrate/manager.h \
+ profiles/heartrate/heartrate.c \
+ profiles/heartrate/heartrate.h
endif
builtin_modules += formfactor
diff --git a/lib/uuid.h b/lib/uuid.h
index aa6efdf..3488e66 100644
--- a/lib/uuid.h
+++ b/lib/uuid.h
@@ -63,6 +63,8 @@ extern "C" {
#define SAP_UUID "0000112D-0000-1000-8000-00805f9b34fb"
+#define HEART_RATE_UUID "0000180d-0000-1000-8000-00805f9b34fb"
+
#define HEALTH_THERMOMETER_UUID "00001809-0000-1000-8000-00805f9b34fb"
#define TEMPERATURE_MEASUREMENT_UUID "00002a1c-0000-1000-8000-00805f9b34fb"
#define TEMPERATURE_TYPE_UUID "00002a1d-0000-1000-8000-00805f9b34fb"
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
new file mode 100644
index 0000000..87bc309
--- /dev/null
+++ b/profiles/heartrate/heartrate.c
@@ -0,0 +1,165 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2012 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <errno.h>
+#include <stdbool.h>
+#include <glib.h>
+#include <bluetooth/uuid.h>
+
+#include "adapter.h"
+#include "device.h"
+#include "heartrate.h"
+
+struct heartrate_adapter {
+ struct btd_adapter *adapter;
+ GSList *devices;
+};
+
+struct heartrate {
+ struct btd_device *dev;
+ struct heartrate_adapter *hradapter;
+};
+
+static GSList *heartrate_adapters = NULL;
+
+static gint cmp_adapter(gconstpointer a, gconstpointer b)
+{
+ const struct heartrate_adapter *hradapter = a;
+ const struct btd_adapter *adapter = b;
+
+ if (adapter == hradapter->adapter)
+ return 0;
+
+ return -1;
+}
+
+static gint cmp_device(gconstpointer a, gconstpointer b)
+{
+ const struct heartrate *hr = a;
+ const struct btd_device *dev = b;
+
+ if (dev == hr->dev)
+ return 0;
+
+ return -1;
+}
+
+static struct heartrate_adapter *
+find_heartrate_adapter(struct btd_adapter *adapter)
+{
+ GSList *l = g_slist_find_custom(heartrate_adapters, adapter,
+ cmp_adapter);
+ if (!l)
+ return NULL;
+
+ return l->data;
+}
+
+static void destroy_heartrate(gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+
+ btd_device_unref(hr->dev);
+ g_free(hr);
+}
+
+static void destroy_heartrate_adapter(gpointer user_data)
+{
+ struct heartrate_adapter *hradapter = user_data;
+
+ g_free(hradapter);
+}
+
+int heartrate_adapter_register(struct btd_adapter *adapter)
+{
+ struct heartrate_adapter *hradapter;
+
+ hradapter = g_new0(struct heartrate_adapter, 1);
+ hradapter->adapter = adapter;
+
+ heartrate_adapters = g_slist_prepend(heartrate_adapters, hradapter);
+
+ return 0;
+}
+
+void heartrate_adapter_unregister(struct btd_adapter *adapter)
+{
+ struct heartrate_adapter *hradapter;
+
+ hradapter = find_heartrate_adapter(adapter);
+ if (hradapter == NULL)
+ return;
+
+ heartrate_adapters = g_slist_remove(heartrate_adapters, hradapter);
+
+ destroy_heartrate_adapter(hradapter);
+}
+
+int heartrate_device_register(struct btd_device *device)
+{
+ struct btd_adapter *adapter;
+ struct heartrate_adapter *hradapter;
+ struct heartrate *hr;
+
+ adapter = device_get_adapter(device);
+
+ hradapter = find_heartrate_adapter(adapter);
+
+ if (hradapter == NULL)
+ return -1;
+
+ hr = g_new0(struct heartrate, 1);
+ hr->dev = btd_device_ref(device);
+ hr->hradapter = hradapter;
+
+ hradapter->devices = g_slist_prepend(hradapter->devices, hr);
+
+ return 0;
+}
+
+void heartrate_device_unregister(struct btd_device *device)
+{
+ struct btd_adapter *adapter;
+ struct heartrate_adapter *hradapter;
+ struct heartrate *hr;
+ GSList *l;
+
+ adapter = device_get_adapter(device);
+
+ hradapter = find_heartrate_adapter(adapter);
+ if (hradapter == NULL)
+ return;
+
+ l = g_slist_find_custom(hradapter->devices, device, cmp_device);
+ if (l == NULL)
+ return;
+
+ hr = l->data;
+
+ hradapter->devices = g_slist_remove(hradapter->devices, hr);
+
+ destroy_heartrate(hr);
+}
diff --git a/profiles/heartrate/heartrate.h b/profiles/heartrate/heartrate.h
new file mode 100644
index 0000000..486f5b3
--- /dev/null
+++ b/profiles/heartrate/heartrate.h
@@ -0,0 +1,26 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2012 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+int heartrate_adapter_register(struct btd_adapter *adapter);
+void heartrate_adapter_unregister(struct btd_adapter *adapter);
+int heartrate_device_register(struct btd_device *device);
+void heartrate_device_unregister(struct btd_device *device);
diff --git a/profiles/heartrate/main.c b/profiles/heartrate/main.c
new file mode 100644
index 0000000..40f34bc
--- /dev/null
+++ b/profiles/heartrate/main.c
@@ -0,0 +1,52 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2012 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdint.h>
+#include <glib.h>
+#include <errno.h>
+
+#include "plugin.h"
+#include "manager.h"
+#include "hcid.h"
+#include "log.h"
+
+static int heartrate_init(void)
+{
+ if (!main_opts.gatt_enabled) {
+ DBG("GATT is disabled");
+ return -ENOTSUP;
+ }
+
+ return heartrate_manager_init();
+}
+
+static void heartrate_exit(void)
+{
+ heartrate_manager_exit();
+}
+
+BLUETOOTH_PLUGIN_DEFINE(heartrate, VERSION, BLUETOOTH_PLUGIN_PRIORITY_DEFAULT,
+ heartrate_init, heartrate_exit)
diff --git a/profiles/heartrate/manager.c b/profiles/heartrate/manager.c
new file mode 100644
index 0000000..3e668f3
--- /dev/null
+++ b/profiles/heartrate/manager.c
@@ -0,0 +1,80 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2012 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <gdbus.h>
+#include <errno.h>
+#include <stdbool.h>
+#include <bluetooth/uuid.h>
+
+#include "adapter.h"
+#include "device.h"
+#include "profile.h"
+#include "att.h"
+#include "gattrib.h"
+#include "gatt.h"
+#include "heartrate.h"
+#include "manager.h"
+
+static int heartrate_adapter_probe(struct btd_profile *p,
+ struct btd_adapter *adapter)
+{
+ return heartrate_adapter_register(adapter);
+}
+
+static void heartrate_adapter_remove(struct btd_profile *p,
+ struct btd_adapter *adapter)
+{
+ heartrate_adapter_unregister(adapter);
+}
+
+static int heartrate_device_probe(struct btd_profile *p,
+ struct btd_device *device, GSList *uuids)
+{
+ return heartrate_device_register(device);
+}
+
+static void heartrate_device_remove(struct btd_profile *p,
+ struct btd_device *device)
+{
+ heartrate_device_unregister(device);
+}
+
+static struct btd_profile hrp_profile = {
+ .name = "Heart Rate GATT Driver",
+ .remote_uuids = BTD_UUIDS(HEART_RATE_UUID),
+
+ .device_probe = heartrate_device_probe,
+ .device_remove = heartrate_device_remove,
+
+ .adapter_probe = heartrate_adapter_probe,
+ .adapter_remove = heartrate_adapter_remove,
+};
+
+int heartrate_manager_init(void)
+{
+ return btd_profile_register(&hrp_profile);
+}
+
+void heartrate_manager_exit(void)
+{
+ btd_profile_unregister(&hrp_profile);
+}
diff --git a/profiles/heartrate/manager.h b/profiles/heartrate/manager.h
new file mode 100644
index 0000000..de799f6
--- /dev/null
+++ b/profiles/heartrate/manager.h
@@ -0,0 +1,24 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2012 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+int heartrate_manager_init(void);
+void heartrate_manager_exit(void);
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 03/13] heartrate: Add attio callbacks
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 01/13] Heart Rate Profile (HRP) client API Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 02/13] heartrate: Add initial HRP client support Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 04/13] heartrate: Discover HRS characteristics Andrzej Kaczmarek
` (10 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
---
profiles/heartrate/heartrate.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index 87bc309..e057180 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -31,6 +31,11 @@
#include "adapter.h"
#include "device.h"
+#include "gattrib.h"
+#include "att.h"
+#include "gatt.h"
+#include "attio.h"
+#include "log.h"
#include "heartrate.h"
struct heartrate_adapter {
@@ -41,6 +46,8 @@ struct heartrate_adapter {
struct heartrate {
struct btd_device *dev;
struct heartrate_adapter *hradapter;
+ GAttrib *attrib;
+ guint attioid;
};
static GSList *heartrate_adapters = NULL;
@@ -82,6 +89,12 @@ static void destroy_heartrate(gpointer user_data)
{
struct heartrate *hr = user_data;
+ if (hr->attioid > 0)
+ btd_device_remove_attio_callback(hr->dev, hr->attioid);
+
+ if (hr->attrib != NULL)
+ g_attrib_unref(hr->attrib);
+
btd_device_unref(hr->dev);
g_free(hr);
}
@@ -93,6 +106,25 @@ static void destroy_heartrate_adapter(gpointer user_data)
g_free(hradapter);
}
+static void attio_connected_cb(GAttrib *attrib, gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+
+ DBG("");
+
+ hr->attrib = g_attrib_ref(attrib);
+}
+
+static void attio_disconnected_cb(gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+
+ DBG("");
+
+ g_attrib_unref(hr->attrib);
+ hr->attrib = NULL;
+}
+
int heartrate_adapter_register(struct btd_adapter *adapter)
{
struct heartrate_adapter *hradapter;
@@ -137,6 +169,9 @@ int heartrate_device_register(struct btd_device *device)
hradapter->devices = g_slist_prepend(hradapter->devices, hr);
+ hr->attioid = btd_device_add_attio_callback(device, attio_connected_cb,
+ attio_disconnected_cb, hr);
+
return 0;
}
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 04/13] heartrate: Discover HRS characteristics
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (2 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 03/13] heartrate: Add attio callbacks Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 05/13] heartrate: Discover Heart Rate Measurement CCC Andrzej Kaczmarek
` (9 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
This patch adds support to discover known Heart Rate Service
characteristics.
---
lib/uuid.h | 3 +++
profiles/heartrate/heartrate.c | 43 +++++++++++++++++++++++++++++++++++++++++-
profiles/heartrate/heartrate.h | 3 ++-
profiles/heartrate/manager.c | 19 ++++++++++++++++++-
4 files changed, 65 insertions(+), 3 deletions(-)
diff --git a/lib/uuid.h b/lib/uuid.h
index 3488e66..9da1b54 100644
--- a/lib/uuid.h
+++ b/lib/uuid.h
@@ -64,6 +64,9 @@ extern "C" {
#define SAP_UUID "0000112D-0000-1000-8000-00805f9b34fb"
#define HEART_RATE_UUID "0000180d-0000-1000-8000-00805f9b34fb"
+#define HEART_RATE_MEASUREMENT_UUID "00002a37-0000-1000-8000-00805f9b34fb"
+#define BODY_SENSOR_LOCATION_UUID "00002a38-0000-1000-8000-00805f9b34fb"
+#define HEART_RATE_CONTROL_POINT_UUID "00002a39-0000-1000-8000-00805f9b34fb"
#define HEALTH_THERMOMETER_UUID "00001809-0000-1000-8000-00805f9b34fb"
#define TEMPERATURE_MEASUREMENT_UUID "00002a1c-0000-1000-8000-00805f9b34fb"
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index e057180..a6733d3 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -48,6 +48,11 @@ struct heartrate {
struct heartrate_adapter *hradapter;
GAttrib *attrib;
guint attioid;
+
+ struct att_range *svc_range; /* primary svc range */
+
+ uint16_t measurement_val_handle;
+ uint16_t hrcp_val_handle;
};
static GSList *heartrate_adapters = NULL;
@@ -96,6 +101,7 @@ static void destroy_heartrate(gpointer user_data)
g_attrib_unref(hr->attrib);
btd_device_unref(hr->dev);
+ g_free(hr->svc_range);
g_free(hr);
}
@@ -106,6 +112,33 @@ static void destroy_heartrate_adapter(gpointer user_data)
g_free(hradapter);
}
+static void discover_char_cb(GSList *chars, guint8 status, gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+
+ if (status) {
+ error("Discover HRS characteristics failed: %s",
+ att_ecode2str(status));
+ return;
+ }
+
+ for (; chars; chars = chars->next) {
+ struct gatt_char *c = chars->data;
+
+ if (g_strcmp0(c->uuid, HEART_RATE_MEASUREMENT_UUID) == 0) {
+ hr->measurement_val_handle = c->value_handle;
+ /* TODO: discover CCC handle */
+ } else if (g_strcmp0(c->uuid, BODY_SENSOR_LOCATION_UUID) == 0) {
+ DBG("Body Sensor Location supported");
+ /* TODO: read characterictic value */
+ } else if (g_strcmp0(c->uuid,
+ HEART_RATE_CONTROL_POINT_UUID) == 0) {
+ DBG("Heart Rate Control Point supported");
+ hr->hrcp_val_handle = c->value_handle;
+ }
+ }
+}
+
static void attio_connected_cb(GAttrib *attrib, gpointer user_data)
{
struct heartrate *hr = user_data;
@@ -113,6 +146,9 @@ static void attio_connected_cb(GAttrib *attrib, gpointer user_data)
DBG("");
hr->attrib = g_attrib_ref(attrib);
+
+ gatt_discover_char(hr->attrib, hr->svc_range->start, hr->svc_range->end,
+ NULL, discover_char_cb, hr);
}
static void attio_disconnected_cb(gpointer user_data)
@@ -150,7 +186,8 @@ void heartrate_adapter_unregister(struct btd_adapter *adapter)
destroy_heartrate_adapter(hradapter);
}
-int heartrate_device_register(struct btd_device *device)
+int heartrate_device_register(struct btd_device *device,
+ struct gatt_primary *prim)
{
struct btd_adapter *adapter;
struct heartrate_adapter *hradapter;
@@ -167,6 +204,10 @@ int heartrate_device_register(struct btd_device *device)
hr->dev = btd_device_ref(device);
hr->hradapter = hradapter;
+ hr->svc_range = g_new0(struct att_range, 1);
+ hr->svc_range->start = prim->range.start;
+ hr->svc_range->end = prim->range.end;
+
hradapter->devices = g_slist_prepend(hradapter->devices, hr);
hr->attioid = btd_device_add_attio_callback(device, attio_connected_cb,
diff --git a/profiles/heartrate/heartrate.h b/profiles/heartrate/heartrate.h
index 486f5b3..064939d 100644
--- a/profiles/heartrate/heartrate.h
+++ b/profiles/heartrate/heartrate.h
@@ -22,5 +22,6 @@
int heartrate_adapter_register(struct btd_adapter *adapter);
void heartrate_adapter_unregister(struct btd_adapter *adapter);
-int heartrate_device_register(struct btd_device *device);
+int heartrate_device_register(struct btd_device *device,
+ struct gatt_primary *prim);
void heartrate_device_unregister(struct btd_device *device);
diff --git a/profiles/heartrate/manager.c b/profiles/heartrate/manager.c
index 3e668f3..19b18a8 100644
--- a/profiles/heartrate/manager.c
+++ b/profiles/heartrate/manager.c
@@ -34,6 +34,14 @@
#include "heartrate.h"
#include "manager.h"
+static gint primary_uuid_cmp(gconstpointer a, gconstpointer b)
+{
+ const struct gatt_primary *prim = a;
+ const char *uuid = b;
+
+ return g_strcmp0(prim->uuid, uuid);
+}
+
static int heartrate_adapter_probe(struct btd_profile *p,
struct btd_adapter *adapter)
{
@@ -49,7 +57,16 @@ static void heartrate_adapter_remove(struct btd_profile *p,
static int heartrate_device_probe(struct btd_profile *p,
struct btd_device *device, GSList *uuids)
{
- return heartrate_device_register(device);
+ GSList *primaries;
+ GSList *l;
+
+ primaries = btd_device_get_primaries(device);
+
+ l = g_slist_find_custom(primaries, HEART_RATE_UUID, primary_uuid_cmp);
+ if (l == NULL)
+ return -EINVAL;
+
+ return heartrate_device_register(device, l->data);
}
static void heartrate_device_remove(struct btd_profile *p,
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 05/13] heartrate: Discover Heart Rate Measurement CCC
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (3 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 04/13] heartrate: Discover HRS characteristics Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 06/13] heartrate: Read Body Sensor Location characteristics Andrzej Kaczmarek
` (8 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
This patch adds support to discover CCC descriptor for Heart Rate
Measurement characteristic.
---
profiles/heartrate/heartrate.c | 66 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 1 deletion(-)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index a6733d3..d3d6d43 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -52,6 +52,7 @@ struct heartrate {
struct att_range *svc_range; /* primary svc range */
uint16_t measurement_val_handle;
+ uint16_t measurement_ccc_handle;
uint16_t hrcp_val_handle;
};
@@ -112,6 +113,65 @@ static void destroy_heartrate_adapter(gpointer user_data)
g_free(hradapter);
}
+static void discover_ccc_cb(guint8 status, const guint8 *pdu,
+ guint16 len, gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+ struct att_data_list *list;
+ uint8_t format;
+ int i;
+
+ if (status != 0) {
+ error("Discover Heart Rate Measurement descriptors failed: %s",
+ att_ecode2str(status));
+ return;
+ }
+
+ list = dec_find_info_resp(pdu, len, &format);
+ if (list == NULL)
+ return;
+
+ if (format != ATT_FIND_INFO_RESP_FMT_16BIT)
+ goto done;
+
+ for (i = 0; i < list->num; i++) {
+ uint8_t *value;
+ uint16_t handle, uuid;
+
+ value = list->data[i];
+ handle = att_get_u16(value);
+ uuid = att_get_u16(value + 2);
+
+ if (uuid == GATT_CLIENT_CHARAC_CFG_UUID) {
+ hr->measurement_ccc_handle = handle;
+ break;
+ }
+ }
+
+done:
+ att_data_list_free(list);
+}
+
+static void discover_measurement_ccc(struct heartrate *hr,
+ struct gatt_char *c, struct gatt_char *c_next)
+{
+ uint16_t start, end;
+
+ start = c->value_handle + 1;
+
+ if (c_next != NULL) {
+ if (start == c_next->handle)
+ return;
+ end = c_next->handle - 1;
+ } else if (c->value_handle != hr->svc_range->end) {
+ end = hr->svc_range->end;
+ } else {
+ return;
+ }
+
+ gatt_find_info(hr->attrib, start, end, discover_ccc_cb, hr);
+}
+
static void discover_char_cb(GSList *chars, guint8 status, gpointer user_data)
{
struct heartrate *hr = user_data;
@@ -126,8 +186,12 @@ static void discover_char_cb(GSList *chars, guint8 status, gpointer user_data)
struct gatt_char *c = chars->data;
if (g_strcmp0(c->uuid, HEART_RATE_MEASUREMENT_UUID) == 0) {
+ struct gatt_char *c_next =
+ (chars->next ? chars->next->data : NULL);
+
hr->measurement_val_handle = c->value_handle;
- /* TODO: discover CCC handle */
+
+ discover_measurement_ccc(hr, c, c_next);
} else if (g_strcmp0(c->uuid, BODY_SENSOR_LOCATION_UUID) == 0) {
DBG("Body Sensor Location supported");
/* TODO: read characterictic value */
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 06/13] heartrate: Read Body Sensor Location characteristics
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (4 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 05/13] heartrate: Discover Heart Rate Measurement CCC Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 07/13] heartrate: Add HeartRateManager interface Andrzej Kaczmarek
` (7 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Rafal Garbat
From: Rafal Garbat <rafal.garbat@tieto.com>
This patch adds support to read and store Body Sensor Location
characteristic value.
---
profiles/heartrate/heartrate.c | 35 ++++++++++++++++++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index d3d6d43..2547f9b 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -54,6 +54,9 @@ struct heartrate {
uint16_t measurement_val_handle;
uint16_t measurement_ccc_handle;
uint16_t hrcp_val_handle;
+
+ gboolean has_location;
+ uint8_t location;
};
static GSList *heartrate_adapters = NULL;
@@ -113,6 +116,34 @@ static void destroy_heartrate_adapter(gpointer user_data)
g_free(hradapter);
}
+static void read_sensor_location_cb(guint8 status, const guint8 *pdu,
+ guint16 len, gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+ uint8_t value;
+ ssize_t vlen;
+
+ if (status != 0) {
+ error("Body Sensor Location read failed: %s",
+ att_ecode2str(status));
+ return;
+ }
+
+ vlen = dec_read_resp(pdu, len, &value, sizeof(value));
+ if (vlen < 0) {
+ error("Protocol error");
+ return;
+ }
+
+ if (vlen != sizeof(value)) {
+ error("Invalid length for Body Sensor Location");
+ return;
+ }
+
+ hr->has_location = TRUE;
+ hr->location = value;
+}
+
static void discover_ccc_cb(guint8 status, const guint8 *pdu,
guint16 len, gpointer user_data)
{
@@ -194,7 +225,9 @@ static void discover_char_cb(GSList *chars, guint8 status, gpointer user_data)
discover_measurement_ccc(hr, c, c_next);
} else if (g_strcmp0(c->uuid, BODY_SENSOR_LOCATION_UUID) == 0) {
DBG("Body Sensor Location supported");
- /* TODO: read characterictic value */
+
+ gatt_read_char(hr->attrib, c->value_handle, 0,
+ read_sensor_location_cb, hr);
} else if (g_strcmp0(c->uuid,
HEART_RATE_CONTROL_POINT_UUID) == 0) {
DBG("Heart Rate Control Point supported");
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 07/13] heartrate: Add HeartRateManager interface
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (5 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 06/13] heartrate: Read Body Sensor Location characteristics Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 08/13] heartrate: Add support to enable notifications Andrzej Kaczmarek
` (6 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Rafal Garbat
From: Rafal Garbat <rafal.garbat@tieto.com>
This patch adds support for org.bluez.HeartRateManager interface on
adapters which allows to register and unregister per-adapter watcher.
---
profiles/heartrate/heartrate.c | 154 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 153 insertions(+), 1 deletion(-)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index 2547f9b..b07a343 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -24,13 +24,16 @@
#include <config.h>
#endif
+#include <gdbus.h>
#include <errno.h>
#include <stdbool.h>
#include <glib.h>
#include <bluetooth/uuid.h>
#include "adapter.h"
+#include "dbus-common.h"
#include "device.h"
+#include "error.h"
#include "gattrib.h"
#include "att.h"
#include "gatt.h"
@@ -38,9 +41,12 @@
#include "log.h"
#include "heartrate.h"
+#define HEART_RATE_MANAGER_INTERFACE "org.bluez.HeartRateManager"
+
struct heartrate_adapter {
struct btd_adapter *adapter;
GSList *devices;
+ GSList *watchers;
};
struct heartrate {
@@ -59,6 +65,13 @@ struct heartrate {
uint8_t location;
};
+struct watcher {
+ struct heartrate_adapter *hradapter;
+ guint id;
+ char *srv;
+ char *path;
+};
+
static GSList *heartrate_adapters = NULL;
static gint cmp_adapter(gconstpointer a, gconstpointer b)
@@ -83,6 +96,19 @@ static gint cmp_device(gconstpointer a, gconstpointer b)
return -1;
}
+static gint cmp_watcher(gconstpointer a, gconstpointer b)
+{
+ const struct watcher *watcher = a;
+ const struct watcher *match = b;
+ int ret;
+
+ ret = g_strcmp0(watcher->srv, match->srv);
+ if (ret != 0)
+ return ret;
+
+ return g_strcmp0(watcher->path, match->path);
+}
+
static struct heartrate_adapter *
find_heartrate_adapter(struct btd_adapter *adapter)
{
@@ -94,6 +120,34 @@ find_heartrate_adapter(struct btd_adapter *adapter)
return l->data;
}
+static void destroy_watcher(gpointer user_data)
+{
+ struct watcher *watcher = user_data;
+
+ g_free(watcher->path);
+ g_free(watcher->srv);
+ g_free(watcher);
+}
+
+static struct watcher *find_watcher(GSList *list, const char *sender,
+ const char *path)
+{
+ struct watcher *match;
+ GSList *l;
+
+ match = g_new0(struct watcher, 1);
+ match->srv = g_strdup(sender);
+ match->path = g_strdup(path);
+
+ l = g_slist_find_custom(list, match, cmp_watcher);
+ destroy_watcher(match);
+
+ if (l != NULL)
+ return l->data;
+
+ return NULL;
+}
+
static void destroy_heartrate(gpointer user_data)
{
struct heartrate *hr = user_data;
@@ -109,10 +163,19 @@ static void destroy_heartrate(gpointer user_data)
g_free(hr);
}
+static void remove_watcher(gpointer user_data)
+{
+ struct watcher *watcher = user_data;
+
+ g_dbus_remove_watch(btd_get_dbus_connection(), watcher->id);
+}
+
static void destroy_heartrate_adapter(gpointer user_data)
{
struct heartrate_adapter *hradapter = user_data;
+ g_slist_free_full(hradapter->watchers, remove_watcher);
+
g_free(hradapter);
}
@@ -258,6 +321,81 @@ static void attio_disconnected_cb(gpointer user_data)
hr->attrib = NULL;
}
+static void watcher_exit_cb(DBusConnection *conn, void *user_data)
+{
+ struct watcher *watcher = user_data;
+ struct heartrate_adapter *hradapter = watcher->hradapter;
+
+ DBG("heartrate watcher [%s] disconnected", watcher->path);
+
+ hradapter->watchers = g_slist_remove(hradapter->watchers, watcher);
+ g_dbus_remove_watch(conn, watcher->id);
+}
+
+static DBusMessage *register_watcher(DBusConnection *conn, DBusMessage *msg,
+ void *data)
+{
+ struct heartrate_adapter *hradapter = data;
+ struct watcher *watcher;
+ const char *sender = dbus_message_get_sender(msg);
+ char *path;
+
+ if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_OBJECT_PATH, &path,
+ DBUS_TYPE_INVALID))
+ return btd_error_invalid_args(msg);
+
+ watcher = find_watcher(hradapter->watchers, sender, path);
+ if (watcher != NULL)
+ return btd_error_already_exists(msg);
+
+ watcher = g_new0(struct watcher, 1);
+ watcher->hradapter = hradapter;
+ watcher->id = g_dbus_add_disconnect_watch(conn, sender, watcher_exit_cb,
+ watcher, destroy_watcher);
+ watcher->srv = g_strdup(sender);
+ watcher->path = g_strdup(path);
+
+ hradapter->watchers = g_slist_prepend(hradapter->watchers, watcher);
+
+ DBG("heartrate watcher [%s] registered", path);
+
+ return dbus_message_new_method_return(msg);
+}
+
+static DBusMessage *unregister_watcher(DBusConnection *conn, DBusMessage *msg,
+ void *data)
+{
+ struct heartrate_adapter *hradapter = data;
+ struct watcher *watcher;
+ const char *sender = dbus_message_get_sender(msg);
+ char *path;
+
+ if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_OBJECT_PATH, &path,
+ DBUS_TYPE_INVALID))
+ return btd_error_invalid_args(msg);
+
+ watcher = find_watcher(hradapter->watchers, sender, path);
+ if (watcher == NULL)
+ return btd_error_does_not_exist(msg);
+
+ hradapter->watchers = g_slist_remove(hradapter->watchers, watcher);
+ g_dbus_remove_watch(conn, watcher->id);
+
+ DBG("heartrate watcher [%s] unregistered", path);
+
+ return dbus_message_new_method_return(msg);
+}
+
+static const GDBusMethodTable heartrate_manager_methods[] = {
+ { GDBUS_METHOD("RegisterWatcher",
+ GDBUS_ARGS({ "agent", "o" }), NULL,
+ register_watcher) },
+ { GDBUS_METHOD("UnregisterWatcher",
+ GDBUS_ARGS({ "agent", "o" }), NULL,
+ unregister_watcher) },
+ { }
+};
+
int heartrate_adapter_register(struct btd_adapter *adapter)
{
struct heartrate_adapter *hradapter;
@@ -267,6 +405,18 @@ int heartrate_adapter_register(struct btd_adapter *adapter)
heartrate_adapters = g_slist_prepend(heartrate_adapters, hradapter);
+ if (!g_dbus_register_interface(btd_get_dbus_connection(),
+ adapter_get_path(adapter),
+ HEART_RATE_MANAGER_INTERFACE,
+ heartrate_manager_methods,
+ NULL, NULL, hradapter,
+ destroy_heartrate_adapter)) {
+ error("D-Bus failed to register %s interface",
+ HEART_RATE_MANAGER_INTERFACE);
+ destroy_heartrate_adapter(hradapter);
+ return -EIO;
+ }
+
return 0;
}
@@ -280,7 +430,9 @@ void heartrate_adapter_unregister(struct btd_adapter *adapter)
heartrate_adapters = g_slist_remove(heartrate_adapters, hradapter);
- destroy_heartrate_adapter(hradapter);
+ g_dbus_unregister_interface(btd_get_dbus_connection(),
+ adapter_get_path(hradapter->adapter),
+ HEART_RATE_MANAGER_INTERFACE);
}
int heartrate_device_register(struct btd_device *device,
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 08/13] heartrate: Add support to enable notifications
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (6 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 07/13] heartrate: Add HeartRateManager interface Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 09/13] heartrate: Process measurement notifications Andrzej Kaczmarek
` (5 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
This patch adds support to enable notifications for Heart Rate Measurement
characteristic value. Notifications are enabled automatically when at
least one watcher is registered and disabled otherwise.
---
profiles/heartrate/heartrate.c | 67 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index b07a343..dda030b 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -207,6 +207,17 @@ static void read_sensor_location_cb(guint8 status, const guint8 *pdu,
hr->location = value;
}
+static void char_write_cb(guint8 status, const guint8 *pdu, guint16 len,
+ gpointer user_data)
+{
+ char *msg = user_data;
+
+ if (status != 0)
+ error("%s failed", msg);
+
+ g_free(msg);
+}
+
static void discover_ccc_cb(guint8 status, const guint8 *pdu,
guint16 len, gpointer user_data)
{
@@ -237,7 +248,20 @@ static void discover_ccc_cb(guint8 status, const guint8 *pdu,
uuid = att_get_u16(value + 2);
if (uuid == GATT_CLIENT_CHARAC_CFG_UUID) {
+ uint8_t value[2];
+ char *msg;
+
hr->measurement_ccc_handle = handle;
+
+ if (g_slist_length(hr->hradapter->watchers) == 0)
+ break;
+
+ att_put_u16(GATT_CLIENT_CHARAC_CFG_NOTIF_BIT, value);
+ msg = g_strdup("Enable measurement");
+
+ gatt_write_char(hr->attrib, handle, value,
+ sizeof(value), char_write_cb, msg);
+
break;
}
}
@@ -299,6 +323,40 @@ static void discover_char_cb(GSList *chars, guint8 status, gpointer user_data)
}
}
+static void enable_measurement(gpointer data, gpointer user_data)
+{
+ struct heartrate *hr = data;
+ uint16_t handle = hr->measurement_ccc_handle;
+ uint8_t value[2];
+ char *msg;
+
+ if (hr->attrib == NULL || !handle)
+ return;
+
+ att_put_u16(GATT_CLIENT_CHARAC_CFG_NOTIF_BIT, value);
+ msg = g_strdup("Enable measurement");
+
+ gatt_write_char(hr->attrib, handle, value, sizeof(value),
+ char_write_cb, msg);
+}
+
+static void disable_measurement(gpointer data, gpointer user_data)
+{
+ struct heartrate *hr = data;
+ uint16_t handle = hr->measurement_ccc_handle;
+ uint8_t value[2];
+ char *msg;
+
+ if (hr->attrib == NULL || !handle)
+ return;
+
+ att_put_u16(0x0000, value);
+ msg = g_strdup("Disable measurement");
+
+ gatt_write_char(hr->attrib, handle, value, sizeof(value),
+ char_write_cb, msg);
+}
+
static void attio_connected_cb(GAttrib *attrib, gpointer user_data)
{
struct heartrate *hr = user_data;
@@ -330,6 +388,9 @@ static void watcher_exit_cb(DBusConnection *conn, void *user_data)
hradapter->watchers = g_slist_remove(hradapter->watchers, watcher);
g_dbus_remove_watch(conn, watcher->id);
+
+ if (g_slist_length(hradapter->watchers) == 0)
+ g_slist_foreach(hradapter->devices, disable_measurement, 0);
}
static DBusMessage *register_watcher(DBusConnection *conn, DBusMessage *msg,
@@ -355,6 +416,9 @@ static DBusMessage *register_watcher(DBusConnection *conn, DBusMessage *msg,
watcher->srv = g_strdup(sender);
watcher->path = g_strdup(path);
+ if (g_slist_length(hradapter->watchers) == 0)
+ g_slist_foreach(hradapter->devices, enable_measurement, 0);
+
hradapter->watchers = g_slist_prepend(hradapter->watchers, watcher);
DBG("heartrate watcher [%s] registered", path);
@@ -381,6 +445,9 @@ static DBusMessage *unregister_watcher(DBusConnection *conn, DBusMessage *msg,
hradapter->watchers = g_slist_remove(hradapter->watchers, watcher);
g_dbus_remove_watch(conn, watcher->id);
+ if (g_slist_length(hradapter->watchers) == 0)
+ g_slist_foreach(hradapter->devices, disable_measurement, 0);
+
DBG("heartrate watcher [%s] unregistered", path);
return dbus_message_new_method_return(msg);
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 09/13] heartrate: Process measurement notifications
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (7 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 08/13] heartrate: Add support to enable notifications Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 10/13] heartrate: Add support to reset Energy Expended Andrzej Kaczmarek
` (4 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
This patch adds processing of received Heart Rate Measurement
characteristic notifications and sends processed data to registered
watchers.
---
profiles/heartrate/heartrate.c | 167 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 166 insertions(+), 1 deletion(-)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index dda030b..ba1c1fa 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -42,6 +42,13 @@
#include "heartrate.h"
#define HEART_RATE_MANAGER_INTERFACE "org.bluez.HeartRateManager"
+#define HEART_RATE_WATCHER_INTERFACE "org.bluez.HeartRateWatcher"
+
+#define HR_VALUE_FORMAT 0x01
+#define SENSOR_CONTACT_DETECTED 0x02
+#define SENSOR_CONTACT_SUPPORT 0x04
+#define ENERGY_EXP_STATUS 0x08
+#define RR_INTERVAL 0x10
struct heartrate_adapter {
struct btd_adapter *adapter;
@@ -54,6 +61,7 @@ struct heartrate {
struct heartrate_adapter *hradapter;
GAttrib *attrib;
guint attioid;
+ guint attionotid;
struct att_range *svc_range; /* primary svc range */
@@ -72,6 +80,17 @@ struct watcher {
char *path;
};
+struct measurement {
+ struct heartrate *hr;
+ uint16_t value;
+ gboolean has_energy;
+ uint16_t energy;
+ gboolean has_contact;
+ gboolean contact;
+ uint16_t num_interval;
+ uint16_t *interval;
+};
+
static GSList *heartrate_adapters = NULL;
static gint cmp_adapter(gconstpointer a, gconstpointer b)
@@ -155,8 +174,10 @@ static void destroy_heartrate(gpointer user_data)
if (hr->attioid > 0)
btd_device_remove_attio_callback(hr->dev, hr->attioid);
- if (hr->attrib != NULL)
+ if (hr->attrib != NULL) {
+ g_attrib_unregister(hr->attrib, hr->attionotid);
g_attrib_unref(hr->attrib);
+ }
btd_device_unref(hr->dev);
g_free(hr->svc_range);
@@ -357,6 +378,142 @@ static void disable_measurement(gpointer data, gpointer user_data)
char_write_cb, msg);
}
+static void update_watcher(gpointer data, gpointer user_data)
+{
+ struct watcher *w = data;
+ struct measurement *m = user_data;
+ struct heartrate *hr = m->hr;
+ const gchar *path = device_get_path(hr->dev);
+ DBusMessageIter iter;
+ DBusMessageIter dict;
+ DBusMessage *msg;
+
+ msg = dbus_message_new_method_call(w->srv, w->path,
+ HEART_RATE_WATCHER_INTERFACE, "MeasurementReceived");
+ if (msg == NULL)
+ return;
+
+ dbus_message_iter_init_append(msg, &iter);
+
+ dbus_message_iter_append_basic(&iter, DBUS_TYPE_OBJECT_PATH , &path);
+
+ dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY,
+ DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING
+ DBUS_TYPE_STRING_AS_STRING DBUS_TYPE_VARIANT_AS_STRING
+ DBUS_DICT_ENTRY_END_CHAR_AS_STRING, &dict);
+
+ dict_append_entry(&dict, "Value", DBUS_TYPE_UINT16, &m->value);
+
+ if (m->has_energy)
+ dict_append_entry(&dict, "Energy", DBUS_TYPE_UINT16,
+ &m->energy);
+
+ if (m->has_contact)
+ dict_append_entry(&dict, "Contact", DBUS_TYPE_BOOLEAN,
+ &m->contact);
+
+ if (m->num_interval > 0)
+ dict_append_array(&dict, "Interval", DBUS_TYPE_UINT16,
+ &m->interval, m->num_interval);
+
+ dbus_message_iter_close_container(&iter, &dict);
+
+ dbus_message_set_no_reply(msg, TRUE);
+ g_dbus_send_message(btd_get_dbus_connection(), msg);
+}
+
+static void process_measurement(struct heartrate *hr, const uint8_t *pdu,
+ uint16_t len)
+{
+ struct measurement m;
+ uint8_t flags;
+
+ flags = *pdu;
+
+ pdu++;
+ len--;
+
+ memset(&m, 0, sizeof(m));
+
+ if (flags & HR_VALUE_FORMAT) {
+ if (len < 2) {
+ error("Heart Rate Measurement field missing");
+ return;
+ }
+
+ m.value = att_get_u16(pdu);
+ pdu += 2;
+ len -= 2;
+ } else {
+ if (len < 1) {
+ error("Heart Rate Measurement field missing");
+ return;
+ }
+
+ m.value = *pdu;
+ pdu++;
+ len--;
+ }
+
+ if (flags & ENERGY_EXP_STATUS) {
+ if (len < 2) {
+ error("Energy Expended field missing");
+ return;
+ }
+
+ m.has_energy = TRUE;
+ m.energy = att_get_u16(pdu);
+ pdu += 2;
+ len -= 2;
+ }
+
+ if (flags & RR_INTERVAL) {
+ int i;
+
+ if (len == 0 || (len % 2 != 0)) {
+ error("RR-Interval field malformed");
+ return;
+ }
+
+ m.num_interval = len / 2;
+ m.interval = g_new(uint16_t, m.num_interval);
+
+ for (i = 0; i < m.num_interval; pdu += 2, i++)
+ m.interval[i] = att_get_u16(pdu);
+ }
+
+ if (flags & SENSOR_CONTACT_SUPPORT) {
+ m.has_contact = TRUE;
+ m.contact = !!(flags & SENSOR_CONTACT_DETECTED);
+ }
+
+ /* Notify all registered watchers */
+ m.hr = hr;
+ g_slist_foreach(hr->hradapter->watchers, update_watcher, &m);
+
+ g_free(m.interval);
+}
+
+static void notify_handler(const uint8_t *pdu, uint16_t len, gpointer user_data)
+{
+ struct heartrate *hr = user_data;
+ uint16_t handle;
+
+ /* should be at least opcode (1b) + handle (2b) */
+ if (len < 3) {
+ error("Invalid PDU received");
+ return;
+ }
+
+ handle = att_get_u16(pdu + 1);
+ if (handle != hr->measurement_val_handle) {
+ error("Unexpected handle: 0x%04x", handle);
+ return;
+ }
+
+ process_measurement(hr, pdu + 3, len - 3);
+}
+
static void attio_connected_cb(GAttrib *attrib, gpointer user_data)
{
struct heartrate *hr = user_data;
@@ -365,6 +522,9 @@ static void attio_connected_cb(GAttrib *attrib, gpointer user_data)
hr->attrib = g_attrib_ref(attrib);
+ hr->attionotid = g_attrib_register(hr->attrib, ATT_OP_HANDLE_NOTIFY,
+ notify_handler, hr, NULL);
+
gatt_discover_char(hr->attrib, hr->svc_range->start, hr->svc_range->end,
NULL, discover_char_cb, hr);
}
@@ -375,6 +535,11 @@ static void attio_disconnected_cb(gpointer user_data)
DBG("");
+ if (hr->attionotid > 0) {
+ g_attrib_unregister(hr->attrib, hr->attionotid);
+ hr->attionotid = 0;
+ }
+
g_attrib_unref(hr->attrib);
hr->attrib = NULL;
}
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 10/13] heartrate: Add support to reset Energy Expended
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (8 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 09/13] heartrate: Process measurement notifications Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 11/13] heartrate: Add GetProperties method Andrzej Kaczmarek
` (3 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
This patch adds Reset method on HeartRate interface to reset Energy
Expended.
---
profiles/heartrate/heartrate.c | 45 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 44 insertions(+), 1 deletion(-)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index ba1c1fa..add34b8 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -41,6 +41,7 @@
#include "log.h"
#include "heartrate.h"
+#define HEART_RATE_INTERFACE "org.bluez.HeartRate"
#define HEART_RATE_MANAGER_INTERFACE "org.bluez.HeartRateManager"
#define HEART_RATE_WATCHER_INTERFACE "org.bluez.HeartRateWatcher"
@@ -628,6 +629,35 @@ static const GDBusMethodTable heartrate_manager_methods[] = {
{ }
};
+static DBusMessage *hrcp_reset(DBusConnection *conn, DBusMessage *msg,
+ void *data)
+{
+ struct heartrate *hr = data;
+ uint8_t value;
+ char *vmsg;
+
+ if (!hr->hrcp_val_handle)
+ return btd_error_not_supported(msg);
+
+ if (!hr->attrib)
+ return btd_error_not_available(msg);
+
+ value = 0x01;
+ vmsg = g_strdup("Reset Control Point");
+ gatt_write_char(hr->attrib, hr->hrcp_val_handle, &value,
+ sizeof(value), char_write_cb, vmsg);
+
+ DBG("Energy Expended Value has been reset");
+
+ return dbus_message_new_method_return(msg);
+}
+
+static const GDBusMethodTable heartrate_device_methods[] = {
+ { GDBUS_METHOD("Reset", NULL, NULL,
+ hrcp_reset) },
+ { }
+};
+
int heartrate_adapter_register(struct btd_adapter *adapter)
{
struct heartrate_adapter *hradapter;
@@ -685,6 +715,18 @@ int heartrate_device_register(struct btd_device *device,
hr->dev = btd_device_ref(device);
hr->hradapter = hradapter;
+ if (!g_dbus_register_interface(btd_get_dbus_connection(),
+ device_get_path(device),
+ HEART_RATE_INTERFACE,
+ heartrate_device_methods,
+ NULL, NULL, hr,
+ destroy_heartrate)) {
+ error("D-Bus failed to register %s interface",
+ HEART_RATE_INTERFACE);
+ destroy_heartrate(hr);
+ return -EIO;
+ }
+
hr->svc_range = g_new0(struct att_range, 1);
hr->svc_range->start = prim->range.start;
hr->svc_range->end = prim->range.end;
@@ -718,5 +760,6 @@ void heartrate_device_unregister(struct btd_device *device)
hradapter->devices = g_slist_remove(hradapter->devices, hr);
- destroy_heartrate(hr);
+ g_dbus_unregister_interface(btd_get_dbus_connection(),
+ device_get_path(device), HEART_RATE_INTERFACE);
}
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 11/13] heartrate: Add GetProperties method
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (9 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 10/13] heartrate: Add support to reset Energy Expended Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 12/13] heartrate: Add HeartRateWatcher interface to default policy Andrzej Kaczmarek
` (2 subsequent siblings)
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Rafal Garbat
From: Rafal Garbat <rafal.garbat@tieto.com>
---
profiles/heartrate/heartrate.c | 61 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/profiles/heartrate/heartrate.c b/profiles/heartrate/heartrate.c
index add34b8..81dd5cc 100644
--- a/profiles/heartrate/heartrate.c
+++ b/profiles/heartrate/heartrate.c
@@ -94,6 +94,25 @@ struct measurement {
static GSList *heartrate_adapters = NULL;
+static const char * const location_enum[] = {
+ "Other",
+ "Chest",
+ "Wrist",
+ "Finger",
+ "Hand",
+ "Earlobe",
+ "Foot",
+};
+
+static const gchar *location2str(uint8_t value)
+{
+ if (value < G_N_ELEMENTS(location_enum))
+ return location_enum[value];
+
+ error("Body Sensor Location [%d] is RFU", value);
+ return NULL;
+}
+
static gint cmp_adapter(gconstpointer a, gconstpointer b)
{
const struct heartrate_adapter *hradapter = a;
@@ -629,6 +648,45 @@ static const GDBusMethodTable heartrate_manager_methods[] = {
{ }
};
+static DBusMessage *get_properties(DBusConnection *conn, DBusMessage *msg,
+ void *data)
+{
+ struct heartrate *hr = data;
+ DBusMessageIter iter;
+ DBusMessageIter dict;
+ DBusMessage *reply;
+ gboolean has_reset;
+
+ reply = dbus_message_new_method_return(msg);
+ if (reply == NULL)
+ return NULL;
+
+ dbus_message_iter_init_append(reply, &iter);
+
+ dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY,
+ DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING
+ DBUS_TYPE_STRING_AS_STRING DBUS_TYPE_VARIANT_AS_STRING
+ DBUS_DICT_ENTRY_END_CHAR_AS_STRING, &dict);
+
+ if (hr->has_location) {
+ char *loc = g_strdup(location2str(hr->location));
+
+ if (loc) {
+ dict_append_entry(&dict, "Location",
+ DBUS_TYPE_STRING, &loc);
+ g_free(loc);
+ }
+ }
+
+ has_reset = !!hr->hrcp_val_handle;
+ dict_append_entry(&dict, "ResetSupported", DBUS_TYPE_BOOLEAN,
+ &has_reset);
+
+ dbus_message_iter_close_container(&iter, &dict);
+
+ return reply;
+}
+
static DBusMessage *hrcp_reset(DBusConnection *conn, DBusMessage *msg,
void *data)
{
@@ -653,6 +711,9 @@ static DBusMessage *hrcp_reset(DBusConnection *conn, DBusMessage *msg,
}
static const GDBusMethodTable heartrate_device_methods[] = {
+ { GDBUS_METHOD("GetProperties",
+ NULL, GDBUS_ARGS({ "properties", "a{sv}" }),
+ get_properties) },
{ GDBUS_METHOD("Reset", NULL, NULL,
hrcp_reset) },
{ }
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 12/13] heartrate: Add HeartRateWatcher interface to default policy
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (10 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 11/13] heartrate: Add GetProperties method Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-25 14:27 ` [PATCH v8 13/13] heartrate: Add test script Andrzej Kaczmarek
2012-09-28 10:25 ` [PATCH v8 00/13] Heart Rate Profile plugin Johan Hedberg
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Rafal Garbat
From: Rafal Garbat <rafal.garbat@tieto.com>
---
src/bluetooth.conf | 1 +
1 file changed, 1 insertion(+)
diff --git a/src/bluetooth.conf b/src/bluetooth.conf
index 664dbd9..77a9371 100644
--- a/src/bluetooth.conf
+++ b/src/bluetooth.conf
@@ -16,6 +16,7 @@
<allow send_interface="org.bluez.MediaPlayer"/>
<allow send_interface="org.bluez.Watcher"/>
<allow send_interface="org.bluez.ThermometerWatcher"/>
+ <allow send_interface="org.bluez.HeartRateWatcher"/>
</policy>
<policy at_console="true">
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v8 13/13] heartrate: Add test script
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (11 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 12/13] heartrate: Add HeartRateWatcher interface to default policy Andrzej Kaczmarek
@ 2012-09-25 14:27 ` Andrzej Kaczmarek
2012-09-28 10:25 ` [PATCH v8 00/13] Heart Rate Profile plugin Johan Hedberg
13 siblings, 0 replies; 19+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 14:27 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Rafal Garbat
From: Rafal Garbat <rafal.garbat@tieto.com>
---
Makefile.tools | 3 +-
test/test-heartrate | 103 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 105 insertions(+), 1 deletion(-)
create mode 100755 test/test-heartrate
diff --git a/Makefile.tools b/Makefile.tools
index 15fe4e2..81feb75 100644
--- a/Makefile.tools
+++ b/Makefile.tools
@@ -212,4 +212,5 @@ EXTRA_DIST += test/sap_client.py test/hsplay test/hsmicro \
test/test-proximity test/test-thermometer test/test-profile \
test/test-health test/test-health-sink test/service-record.dtd \
test/service-did.xml test/service-spp.xml test/service-opp.xml \
- test/service-ftp.xml test/simple-player test/test-nap
+ test/service-ftp.xml test/simple-player test/test-nap \
+ test/test-heartrate
diff --git a/test/test-heartrate b/test/test-heartrate
new file mode 100755
index 0000000..316375d
--- /dev/null
+++ b/test/test-heartrate
@@ -0,0 +1,103 @@
+#!/usr/bin/python
+
+from __future__ import absolute_import, print_function, unicode_literals
+
+'''
+Heart Rate Monitor test script
+'''
+
+import gobject
+
+import sys
+import dbus
+import dbus.service
+import dbus.mainloop.glib
+from optparse import OptionParser, make_option
+
+class Watcher(dbus.service.Object):
+ @dbus.service.method("org.bluez.HeartRateWatcher",
+ in_signature="oa{sv}", out_signature="")
+ def MeasurementReceived(self, device, measure):
+ print("Measurement received from %s" % device)
+ print("Value: ", measure["Value"])
+
+ if "Energy" in measure:
+ print("Energy: ", measure["Energy"])
+
+ if "Contact" in measure:
+ print("Contact: ", measure["Contact"])
+
+ if "Interval" in measure:
+ for i in measure["Interval"]:
+ print("Interval: ", i)
+
+if __name__ == "__main__":
+ dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
+
+ bus = dbus.SystemBus()
+
+ manager = dbus.Interface(bus.get_object("org.bluez", "/"),
+ "org.bluez.Manager")
+
+ option_list = [
+ make_option("-i", "--adapter", action="store",
+ type="string", dest="adapter"),
+ make_option("-b", "--device", action="store",
+ type="string", dest="address"),
+ ]
+
+ parser = OptionParser(option_list=option_list)
+
+ (options, args) = parser.parse_args()
+
+ if not options.address:
+ print("Usage: %s [-i <adapter>] -b <bdaddr> [cmd]" % (sys.argv[0]))
+ print("Possible commands:")
+ print("\tReset")
+ sys.exit(1)
+
+ if options.adapter:
+ adapter_path = manager.FindAdapter(options.adapter)
+ else:
+ adapter_path = manager.DefaultAdapter()
+
+ adapter = dbus.Interface(bus.get_object("org.bluez", adapter_path),
+ "org.bluez.Adapter")
+
+ heartrateManager = dbus.Interface(bus.get_object("org.bluez",
+ adapter_path), "org.bluez.HeartRateManager")
+
+ path = "/test/watcher"
+ heartrateManager.RegisterWatcher(path)
+
+ device_path = adapter.FindDevice(options.address)
+
+ device = dbus.Interface(bus.get_object("org.bluez", device_path),
+ "org.bluez.Device")
+
+ heartrate = dbus.Interface(bus.get_object("org.bluez",
+ device_path), "org.bluez.HeartRate")
+
+ watcher = Watcher(bus, path)
+
+ properties = heartrate.GetProperties()
+
+ if "Location" in properties:
+ print("Sensor location: %s" % properties["Location"])
+ else:
+ print("Sensor location is not supported")
+
+ if len(args) > 0:
+ if args[0] == "Reset":
+ reset_sup = properties["ResetSupported"]
+ if reset_sup:
+ heartrate.Reset()
+ else:
+ print("Reset not supported")
+ sys.exit(1)
+ else:
+ print("unknown command")
+ sys.exit(1)
+
+ mainloop = gobject.MainLoop()
+ mainloop.run()
--
1.7.11.3
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH v8 00/13] Heart Rate Profile plugin
2012-09-25 14:27 [PATCH v8 00/13] Heart Rate Profile plugin Andrzej Kaczmarek
` (12 preceding siblings ...)
2012-09-25 14:27 ` [PATCH v8 13/13] heartrate: Add test script Andrzej Kaczmarek
@ 2012-09-28 10:25 ` Johan Hedberg
2012-09-28 12:55 ` Christian Cier-Zniewski
13 siblings, 1 reply; 19+ messages in thread
From: Johan Hedberg @ 2012-09-28 10:25 UTC (permalink / raw)
To: Andrzej Kaczmarek; +Cc: linux-bluetooth
Hi Andrzej,
On Tue, Sep 25, 2012, Andrzej Kaczmarek wrote:
> Changes since v7:
> - rebased to latest upstream master (btd_profile changes)
>
>
> Andrzej Kaczmarek (6):
> heartrate: Add attio callbacks
> heartrate: Discover HRS characteristics
> heartrate: Discover Heart Rate Measurement CCC
> heartrate: Add support to enable notifications
> heartrate: Process measurement notifications
> heartrate: Add support to reset Energy Expended
>
> Rafal Garbat (6):
> heartrate: Add initial HRP client support
> heartrate: Read Body Sensor Location characteristics
> heartrate: Add HeartRateManager interface
> heartrate: Add GetProperties method
> heartrate: Add HeartRateWatcher interface to default policy
> heartrate: Add test script
>
> Santiago Carot-Nemesio (1):
> Heart Rate Profile (HRP) client API
>
> Makefile.am | 9 +-
> Makefile.tools | 3 +-
> doc/heartrate-api.txt | 84 +++++
> lib/uuid.h | 5 +
> profiles/heartrate/heartrate.c | 826 +++++++++++++++++++++++++++++++++++++++++
> profiles/heartrate/heartrate.h | 27 ++
> profiles/heartrate/main.c | 52 +++
> profiles/heartrate/manager.c | 97 +++++
> profiles/heartrate/manager.h | 24 ++
> src/bluetooth.conf | 1 +
> test/test-heartrate | 103 +++++
> 11 files changed, 1228 insertions(+), 3 deletions(-)
> create mode 100644 doc/heartrate-api.txt
> create mode 100644 profiles/heartrate/heartrate.c
> create mode 100644 profiles/heartrate/heartrate.h
> create mode 100644 profiles/heartrate/main.c
> create mode 100644 profiles/heartrate/manager.c
> create mode 100644 profiles/heartrate/manager.h
> create mode 100755 test/test-heartrate
All patches in this set have been applied. Thanks.
One notable change I did when applying was to the sensor location API.
The convention is to use lower case for string property values so I
change the API and code to follow this.
Johan
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v8 00/13] Heart Rate Profile plugin
2012-09-28 10:25 ` [PATCH v8 00/13] Heart Rate Profile plugin Johan Hedberg
@ 2012-09-28 12:55 ` Christian Cier-Zniewski
2012-09-28 13:16 ` Johan Hedberg
0 siblings, 1 reply; 19+ messages in thread
From: Christian Cier-Zniewski @ 2012-09-28 12:55 UTC (permalink / raw)
To: johan.hedberg, linux-bluetooth
Hello Johan,
On 28.09.2012 12:25, Johan Hedberg wrote:
> Heart Rate Profile (HRP) client API
>
> Makefile.am | 9 +-
>
> All patches in this set have been applied. Thanks.
>
>
I had to apply the following patch to get the heart rate profile working.
It is currently missing in HEAD although it was present in the patchset
provided by Andrzej.
Christian
---
diff --git a/Makefile.am b/Makefile.am
index 3b37198..c27eb01 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -212,7 +212,7 @@ endif
if GATTMODULES
builtin_modules += thermometer alert time gatt_example proximity
deviceinfo \
- gatt scanparam
+ gatt scanparam heartrate
builtin_sources += profiles/thermometer/main.c \
profiles/thermometer/manager.h \
profiles/thermometer/manager.c \
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH v8 00/13] Heart Rate Profile plugin
2012-09-28 12:55 ` Christian Cier-Zniewski
@ 2012-09-28 13:16 ` Johan Hedberg
2012-09-28 13:59 ` Johan Hedberg
2012-09-28 14:07 ` Christian Cier-Zniewski
0 siblings, 2 replies; 19+ messages in thread
From: Johan Hedberg @ 2012-09-28 13:16 UTC (permalink / raw)
To: Christian Cier-Zniewski; +Cc: linux-bluetooth
Hi,
On Fri, Sep 28, 2012, Christian Cier-Zniewski wrote:
> Hello Johan,
>
> On 28.09.2012 12:25, Johan Hedberg wrote:
> > Heart Rate Profile (HRP) client API
> >
> > Makefile.am | 9 +-
> >
> >All patches in this set have been applied. Thanks.
> >
> >
>
>
> I had to apply the following patch to get the heart rate profile working.
> It is currently missing in HEAD although it was present in the
> patchset provided by Andrzej.
>
> Christian
>
> ---
>
> diff --git a/Makefile.am b/Makefile.am
> index 3b37198..c27eb01 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -212,7 +212,7 @@ endif
>
> if GATTMODULES
> builtin_modules += thermometer alert time gatt_example proximity
> deviceinfo \
> - gatt scanparam
> + gatt scanparam heartrate
> builtin_sources += profiles/thermometer/main.c \
> profiles/thermometer/manager.h \
> profiles/thermometer/manager.c \
>
The Makefile.am changes had conflicts because of other GATT profiles I
applied earlier, so I had to completely manually fix this and probably
made some mistake. Could you please send a proper git patch for this and
I'll apply it?
Johan
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v8 00/13] Heart Rate Profile plugin
2012-09-28 13:16 ` Johan Hedberg
@ 2012-09-28 13:59 ` Johan Hedberg
2012-09-28 14:07 ` Christian Cier-Zniewski
1 sibling, 0 replies; 19+ messages in thread
From: Johan Hedberg @ 2012-09-28 13:59 UTC (permalink / raw)
To: Christian Cier-Zniewski, linux-bluetooth
Hi,
On Fri, Sep 28, 2012, Johan Hedberg wrote:
> On Fri, Sep 28, 2012, Christian Cier-Zniewski wrote:
> > Hello Johan,
> >
> > On 28.09.2012 12:25, Johan Hedberg wrote:
> > > Heart Rate Profile (HRP) client API
> > >
> > > Makefile.am | 9 +-
> > >
> > >All patches in this set have been applied. Thanks.
> > >
> > >
> >
> >
> > I had to apply the following patch to get the heart rate profile working.
> > It is currently missing in HEAD although it was present in the
> > patchset provided by Andrzej.
> >
> > Christian
> >
> > ---
> >
> > diff --git a/Makefile.am b/Makefile.am
> > index 3b37198..c27eb01 100644
> > --- a/Makefile.am
> > +++ b/Makefile.am
> > @@ -212,7 +212,7 @@ endif
> >
> > if GATTMODULES
> > builtin_modules += thermometer alert time gatt_example proximity
> > deviceinfo \
> > - gatt scanparam
> > + gatt scanparam heartrate
> > builtin_sources += profiles/thermometer/main.c \
> > profiles/thermometer/manager.h \
> > profiles/thermometer/manager.c \
> >
>
> The Makefile.am changes had conflicts because of other GATT profiles I
> applied earlier, so I had to completely manually fix this and probably
> made some mistake. Could you please send a proper git patch for this and
> I'll apply it?
Nevermind, I went ahead and fixed it myself.
Johan
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v8 00/13] Heart Rate Profile plugin
2012-09-28 13:16 ` Johan Hedberg
2012-09-28 13:59 ` Johan Hedberg
@ 2012-09-28 14:07 ` Christian Cier-Zniewski
1 sibling, 0 replies; 19+ messages in thread
From: Christian Cier-Zniewski @ 2012-09-28 14:07 UTC (permalink / raw)
To: johan.hedberg; +Cc: linux-bluetooth
Hi,
Am 28.09.2012 15:16, schrieb Johan Hedberg:
> The Makefile.am changes had conflicts because of other GATT profiles I
> applied earlier, so I had to completely manually fix this and probably
> made some mistake. Could you please send a proper git patch for this
> and I'll apply it? Johan
Enable heart rate profile in Makefile.am.
---
Makefile.am | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile.am b/Makefile.am
index 3b37198..c27eb01 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -212,7 +212,7 @@ endif
if GATTMODULES
builtin_modules += thermometer alert time gatt_example proximity
deviceinfo \
- gatt scanparam
+ gatt scanparam heartrate
builtin_sources += profiles/thermometer/main.c \
profiles/thermometer/manager.h \
profiles/thermometer/manager.c \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread