From: Chris Rankin <rankincj@yahoo.com>
To: bluez-users@lists.sourceforge.net
Cc: rankincj@yahoo.com
Subject: Re: [Bluez-users] USB dongle cannot pair with A2DP speakers
Date: Sun, 18 May 2008 14:36:02 +0100 (BST) [thread overview]
Message-ID: <508684.60714.qm@web52902.mail.re2.yahoo.com> (raw)
> I had a pairing & timing problem like this with an at&t tilt. It might
> work for you to log out of the machine and from the console, run
>
> passkey-agent --default 0000 &
>
> then attempt the connection using command-line tools (like aplay in your case).
Hi,
Thanks for the reply. I'm not sure that this is a timing issue, because I did manage to "win" the
race once or twice, and it still didn't work. However, I tried your suggestion with the
passkey-agent, and aplay failed with this error:
ALSA lib pcm_bluetooth.c:1589:(bluetooth_init) BT_GETCAPABILITIES failed : Input/output error(5)
aplay: main:546: audio open error: Input/output error
This "Input/output error" is the same error I get when I "win" the race to enter the passkey with
bluez-gnome. Interestingly, my laptop's bluetooth adaptor doesn't suffer from this race - the
connection with the speakers stays up until I can send the pin code.
To be honest, I don't think I've ever managed to use something with the particular Belkin adapter,
although my only other bluetooth device is a headset. (Is Voice/SCO supposed to work in an
unpatched 2.6.25.x kernel?) Apparently, I have a v2.0 adapter although it's meant to be backwards
compatible with v1.2. Both this adapter and my laptop are using Broadcom chips, and here is the
hciconfig output from my (working) laptop:
hci0: Type: USB
BD Address: 00:19:7E:EB:29:5A ACL MTU: 1017:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:2810088 acl:37 sco:55020 events:84 errors:0
TX bytes:1241 acl:34 sco:0 commands:51 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'lantern.modemnet-0'
Class: 0x000404
Service Classes: Unspecified
Device Class: Audio/Video, Device conforms to the Headset profile
HCI Ver: 2.0 (0x3) HCI Rev: 0x212b LMP Ver: 2.0 (0x3) LMP Subver: 0x41d3
Manufacturer: Broadcom Corporation (15)
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail.
A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2008-05-18 13:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-18 13:36 Chris Rankin [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-05-17 23:52 [Bluez-users] USB dongle cannot pair with A2DP speakers Chris Rankin
2008-05-18 5:22 ` Brad Midgley
2008-05-18 8:54 ` Jelle de Jong
2008-05-18 9:11 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=508684.60714.qm@web52902.mail.re2.yahoo.com \
--to=rankincj@yahoo.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox