From: Peter Robinson <pbrobinson@gmail.com>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] btsco under FC3
Date: Fri, 7 Jan 2005 14:15:44 +0800 [thread overview]
Message-ID: <5256d0b05010622152c32d3f4@mail.gmail.com> (raw)
In-Reply-To: <1105014278.4299.19.camel@pegasus>
> > Just trying to compile btsco under FC3 and have run into a little
> > trouble compiling the latest CVS version. I can't actually get it to
> > compile as yet but will include the HW details FYI.
> >
> > D-Link DBT-120 rev B2
> > Headset Motorola HS-810
> > I also have a Motorola HS-850 on the way (the 810 is actually a friends).
> >
> > The actual problem is that it can't locate the @AO_CFLAGS@ directory
> > during compile. I'm following the directions on the website.
>
> what about installing the AO library development package.
OK with a Motorola HS-810 headset I get it all compiled and when
following the instructions on the web site I get the following.
The one question I have is regarding btsco. When you run the command
with a BT Mac address is it suppose to return to the command prompt or
is it like a daemon?
As seen below it detects the device, the voice settings and connects
with a RFCOMM channel but then it just sits there. I end up just
putting it into the background and try running the varoius examples.
Output of all included below. I get no sound at all. any ideas or
suggestions?
Pete
[root@trinity btsco]# btsco 00:07:A4:0E:69:3D
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
[1]+ Stopped btsco 00:07:A4:0E:69:3D
[root@trinity btsco]# bg
[1]+ btsco 00:07:A4:0E:69:3D &
[root@trinity btsco]# mpg123 --au -
/home/audio/mp3/green_day/american_idiot/green_day-boulevard_of_broken_dreams.mp3
| sbc/sbcenc - | ./a2play 00:07:A4:0E:69:3D
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
Version 0.59q (2002/03/23). Written and copyrights by Joe Drew.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
Title : Boulevard Of Broken Dreams Artist: Green Day
Album : American Idiot Year : 2004
Comment: Genre : Punk Rock
Directory: /home/audio/mp3/green_day/american_idiot/
Playing MPEG stream from green_day-boulevard_of_broken_dreams.mp3 ...
MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
subbands = 1
allocation method = 1
channel_mode = 2
blocks = 3
sampling frequency = 2
bitpool = 32
frame len = 72
Using address: 00:07:A4:0E:69:3D
Can't connect to 3D:69:0E:A4:07:00. Invalid argument(22)
cannot open psm_cmd = 0
[root@trinity btsco]# mpg123 --au -
/home/audio/mp3/green_day/american_idiot/green_day-boulevard_of_broken_dreams.mp3
| sbc/sbcenc - | ./sbc/rcplay 00:07:A4:0E:69:3D -
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
Version 0.59q (2002/03/23). Written and copyrights by Joe Drew.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
Title : Boulevard Of Broken Dreams Artist: Green Day
Album : American Idiot Year : 2004
Comment: Genre : Punk Rock
Directory: /home/audio/mp3/green_day/american_idiot/
Playing MPEG stream from green_day-boulevard_of_broken_dreams.mp3 ...
MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2005-01-07 6:15 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-06 4:46 [Bluez-devel] btsco under FC3 Peter Robinson
2005-01-06 7:28 ` Bob Gustafson
2005-01-06 12:24 ` Marcel Holtmann
2005-01-06 14:23 ` Bob Gustafson
2005-01-06 14:51 ` Marcel Holtmann
2005-01-06 15:33 ` Bob Gustafson
2005-01-07 6:15 ` Peter Robinson [this message]
2005-01-07 7:14 ` Brad Midgley
2005-01-07 7:19 ` Peter Robinson
2005-01-07 11:08 ` Lars Grunewaldt
2005-01-07 11:01 ` Henryk Plötz
2005-01-07 11:10 ` Lars Grunewaldt
2005-01-08 1:42 ` Peter Robinson
-- strict thread matches above, loose matches on Subject: below --
2005-01-06 15:36 Bob Gustafson
2005-01-06 15:51 Bob Gustafson
2005-01-06 17:26 ` Marcel Holtmann
2005-01-07 3:30 ` Peter Robinson
2005-01-07 4:20 ` Brad Midgley
2005-01-07 3:43 ` Bob Gustafson
[not found] ` <v04020a21be03b42174eb@192.168.49.19>
2005-01-07 6:06 ` Peter Robinson
2005-01-06 16:21 Bob Gustafson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5256d0b05010622152c32d3f4@mail.gmail.com \
--to=pbrobinson@gmail.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox