Hi,

I have two USB sticks manufactured by CSR. They are class 1 EDR with LMP version 2.0. When I tried to use l2ping command, I get the following output:

Ping: xx:xx:xx:xx:xx from xx:xx:xx:xx:xx:xx (data size 44) ...
no response from xx:xx:xx:xx:xx:xx id 0
no response from xx:xx:xx:xx:xx:xx id 1
no response from xx:xx:xx:xx:xx:xx id 2
Recv failed: Connection timed out

hci0:   Type: USB
        BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:1857 acl:20 sco:0 events:71 errors:0
        TX bytes:1077 acl:25 sco:0 commands:30 errors:0

hci1:   Type: USB
        BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:717 acl:8 sco:0 events:44 errors:0
        TX bytes:507 acl:8 sco:0 commands:23 errors:0

It works fine for class 2 devices. Are class 1 devices with EDR supported by Bluez as hcidump shows that they are unable to connect to each other .

thanks 

sohel


       
---------------------------------
Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel and lay it on us.