I finally could make Nokia HDW-3 work with Fedora 8 by applying the patch listed in this mailing list.

At least everything is fine at the moment though I get the following error while playing (it still plays fine) -

[AO_ALSA] alsa-lib: pcm_bluetooth.c:417:(bluetooth_hsp_hw_params) Protocol not available (92)


Thanks
Mahtab

Mahtab Hossain <mahtab_hossain2002@yahoo.com> wrote: Hi,

I have a Nokia HDW-3 which has been used with btsco successfully before in Fedora 4. Now, it seems I can't somehow pair it.

Here is my hcid.conf file look like:
options {
        # Automatically initialize new devices
        autoinit yes;

        security user;

        pairing multi;

        # Default PIN code for incoming connections
        passkey "BlueZ";
}

hcitool scan or inq can find the headset. And I also have successfully paired with my Motorola Mobile Phone (entering PIN at both Phone and Laptop side) - so I think pairing can be done with the current state of my bluez stack.

The hcidump -X -V always gives me the following results whenever I try to connect with my headset or run some command  like, hcitool info <bt-addr of headset> or send direct command like CreateBonding through dbus or even when I switch-on my headset (I wonder why my dongle wants to connect with the headset since I have not saved any information of my headset in the Laptop).

HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
    bdaddr 00:03:89:B0:58:91 class 0x200404 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
    bdaddr 00:03:89:B0:58:91 role 0x01
    Role: Slave
> HCI Event: Command Status (0x0f) plen 4
    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:03:89:B0:58:91
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr  00:03:89:B0:58:91
> HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:03:89:B0:58:91
> HCI Event: Connect Complete (0x03) plen 11
    status 0x06 handle 42 bdaddr 00:03:89:B0:58:91 type ACL encrypt 0x00
    Error: PIN or Key Missing

These are my current bluetooth packages:

rpm -qa | grep bluez*

bluez-utils-3.20-6.fc8
gnome-bluetooth-0.10.0-1.fc8
bluez-libs-3.20-1.fc8
bluez-hcidump-1.40-1.fc8
bluez-utils-cups-3.20-6.fc8
bluez-gnome-0.14-8.fc8
bluez-gnome-analyzer-0.14-8.fc8
pybluez-0.9.2-1.fc7
bluez-utils-alsa-3.20-6.fc8
gnome-bluetooth-libs-0.10.0-1.fc8
bluez-libs-devel-3.20-1.fc8

It would be really helpful if somebody can point me somewhere why the pairing isn't happening.

Thanks
Mahtab
           

---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users


       
---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.