Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device

linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Dmitry Tunin <hanipouspilot@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-wireless@vger.kernel.org
Subject: Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device
Date: Wed, 19 Nov 2014 09:46:38 +0300	[thread overview]
Message-ID: <546C3CCE.400@gmail.com> (raw)
In-Reply-To: <F01422F2-5F7C-406A-A06B-2C2CE96B9E3A@holtmann.org>

Hi Marcel,

Here is information from /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms


I hope this mail client is OK now.

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif  it was an AR3012 device,
but it works both ways. This is the right one.

Signed-off-by: Dmitry Tunin<hanipouspilot@gmail.com>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
      { USB_DEVICE(0x0CF3, 0x3002) },
      { USB_DEVICE(0x0CF3, 0xE019) },
      { USB_DEVICE(0x13d3, 0x3304) },
+    { USB_DEVICE(0x13d3, 0x3408) },

      /* Atheros AR9285 Malbec with sflash firmware */
      { USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
      { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
      { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
      { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+    { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

      /* Atheros AR9285 Malbec with sflash firmware */
      { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },


19.11.2014 01:56, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>> It is AR3011 device according to iProduct == 0.
>> So btusb should be blacklisted
>> I submitted a wrong patch before asif  it was an AR3012 device,
>> but it works both ways. This is the right one.
> include the device details from /sys/kernel/debug/usb/devices.
>
>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>> are */
> No idea what this are */ is.
>
>> ---
>>
>> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
>> index d85ced2..3b53116 100644
>> --- a/drivers/bluetooth/ath3k.c
>> +++ b/drivers/bluetooth/ath3k.c
>> @@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
>>   { USB_DEVICE(0x0CF3, 0x3002) },
>>   { USB_DEVICE(0x0CF3, 0xE019) },
>>   { USB_DEVICE(0x13d3, 0x3304) },
>> + { USB_DEVICE(0x13d3, 0x3408) },
>>
>>   /* Atheros AR9285 Malbec with sflash firmware */
>>   { USB_DEVICE(0x03F0, 0x311D) },
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index edfc17b..bbf5c1c 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
>>   { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
>>   { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
>>   { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },
> Fix whitespace here or use a proper mail client.
>
> Regards
>
> Marcel
>

next prev parent reply	other threads:[~2014-11-19  6:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-18 22:51 [PATCH v2] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin
2014-11-18 22:56 ` Marcel Holtmann
2014-11-19  6:46   ` Dmitry Tunin [this message]
2014-11-19  9:37     ` [PATCH v3] " Michel Memeteau - EKIMIA
2014-11-19  9:40       ` Michel Memeteau - EKIMIA
2014-11-19 10:06         ` Dmitry Tunin
2014-11-23 12:10           ` Dmitry Tunin
2014-11-19  9:52       ` Dmitry Tunin

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:d85ced2 dfblob:3b53116 dfblob:edfc17b dfblob:bbf5c1c )
 OR (
bs:"Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=546C3CCE.400@gmail.com \
    --to=hanipouspilot@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).