* [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
@ 2014-11-25 17:19 Dmitry Tunin
2014-11-26 5:05 ` Marcel Holtmann
2014-11-26 17:49 ` Johan Hedberg
0 siblings, 2 replies; 8+ messages in thread
From: Dmitry Tunin @ 2014-11-25 17:19 UTC (permalink / raw)
To: linux-bluetooth, linux-kernel, stable
Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
This bluetooth module requires loading patch and sysconfig by ath3k driver.
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
---
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..086240c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3432) },
/* Atheros AR5BBU12 with sflash firmware */
@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..091c813 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
--
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
2014-11-25 17:19 [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin
@ 2014-11-26 5:05 ` Marcel Holtmann
2014-11-26 8:04 ` Dmitry Tunin
2014-11-26 17:49 ` Johan Hedberg
1 sibling, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2014-11-26 5:05 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable
Hi Dmitry,
> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3408 Rev= 0.02
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
>
> CC: stable@vger.kernel.org
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
so you really need to make sure to send only one version. I now have two patches labeled as v6 and I have no idea which one is recent and which one I am suppose to apply.
I tried applying this one, but it failed. Patches need to be based against bluetooth-next tree.
Applying: ath3k: Add support of MCI 13d3:3408 bt device
error: patch failed: drivers/bluetooth/ath3k.c:105
error: drivers/bluetooth/ath3k.c: patch does not apply
error: patch failed: drivers/bluetooth/btusb.c:182
error: drivers/bluetooth/btusb.c: patch does not apply
Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device
Regards
Marcel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
2014-11-26 5:05 ` Marcel Holtmann
@ 2014-11-26 8:04 ` Dmitry Tunin
2014-11-26 8:50 ` Marcel Holtmann
2014-12-05 9:18 ` Michel Memeteau - EKIMIA
0 siblings, 2 replies; 8+ messages in thread
From: Dmitry Tunin @ 2014-11-26 8:04 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel, stable
Hi all,
I spent already hours on sending this fucking email. The patch works for
me. And if someone else is interested in working of this device feel
free and do it yourself.
26.11.2014 08:05, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>>
>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=13d3 ProdID=3408 Rev= 0.02
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>>
>> CC: stable@vger.kernel.org
>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>
> so you really need to make sure to send only one version. I now have two patches labeled as v6 and I have no idea which one is recent and which one I am suppose to apply.
>
> I tried applying this one, but it failed. Patches need to be based against bluetooth-next tree.
>
> Applying: ath3k: Add support of MCI 13d3:3408 bt device
> error: patch failed: drivers/bluetooth/ath3k.c:105
> error: drivers/bluetooth/ath3k.c: patch does not apply
> error: patch failed: drivers/bluetooth/btusb.c:182
> error: drivers/bluetooth/btusb.c: patch does not apply
> Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
2014-11-26 8:04 ` Dmitry Tunin
@ 2014-11-26 8:50 ` Marcel Holtmann
2014-11-26 8:59 ` Dmitry Tunin
2014-12-05 9:18 ` Michel Memeteau - EKIMIA
1 sibling, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2014-11-26 8:50 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable
Hi Dmitry,
> I spent already hours on sending this fucking email. The patch works for me. And if someone else is interested in working of this device feel free and do it yourself.
so you are blaming the maintainers. Thank you very much :(
Maybe reading Documentation/SubmittingPatches and just following the steps in there would get you what you wanted. Others have successfully submitted tons and tons of patches.
Regards
Marcel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
2014-11-26 8:50 ` Marcel Holtmann
@ 2014-11-26 8:59 ` Dmitry Tunin
0 siblings, 0 replies; 8+ messages in thread
From: Dmitry Tunin @ 2014-11-26 8:59 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel, stable
I do not blame anyone. I am not paid for submitting patches. I've done
some work to find a solution. You can treat my post as a bug report.
I know it as a very hard 'extra work' to edit my mail, or remove a
duplicate of a 3 line patch. But the whole thing is too much of an extra
work for me. I am not interested any more. If this patch is ignored, I
don't care, since MY bluetooth module works.
My patch was against 3.18rc5. I do not plan to download any other
branches, build and test them anyway.
And tell Canonical that it is not good to send users upstream. It is
distro maintainers job, not users.
Regards,
Dmitry
26.11.2014 11:50, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> I spent already hours on sending this fucking email. The patch works for me. And if someone else is interested in working of this device feel free and do it yourself.
>
> so you are blaming the maintainers. Thank you very much :(
>
> Maybe reading Documentation/SubmittingPatches and just following the steps in there would get you what you wanted. Others have successfully submitted tons and tons of patches.
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
2014-11-26 8:04 ` Dmitry Tunin
2014-11-26 8:50 ` Marcel Holtmann
@ 2014-12-05 9:18 ` Michel Memeteau - EKIMIA
1 sibling, 0 replies; 8+ messages in thread
From: Michel Memeteau - EKIMIA @ 2014-12-05 9:18 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: Marcel Holtmann, linux-bluetooth, linux-kernel, stable
Thanks for your work dimitry,
I need to make AR9565 BT work with Kernel 3.13 on Ubuntu 14.04 so I'm
really interrested in what you did.
Regards.
<------------------------------------------------------------------------------------------------------------------>
Michel Memeteau - Directeur.
Notre Boutique Ordinateurs GNU/Linux : http://shop.ekimia.fr
49 chemin de l'union 13720 La Bouilladisse - France.
Fixe : +33 (0) 972308334 Mobile : +33(0) 624808051
<------------------------------------------------------------------------------------------------------------------>
2014-11-26 9:04 GMT+01:00 Dmitry Tunin <hanipouspilot@gmail.com>:
> Hi all,
>
> I spent already hours on sending this fucking email. The patch works for me.
> And if someone else is interested in working of this device feel free and do
> it yourself.
>
>
> 26.11.2014 08:05, Marcel Holtmann wrote:
>>
>> Hi Dmitry,
>>
>>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>>> This bluetooth module requires loading patch and sysconfig by ath3k
>>> driver.
>>>
>>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
>>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>>> P: Vendor=13d3 ProdID=3408 Rev= 0.02
>>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>>
>>>
>>> CC: stable@vger.kernel.org
>>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>>
>>
>> so you really need to make sure to send only one version. I now have two
>> patches labeled as v6 and I have no idea which one is recent and which one I
>> am suppose to apply.
>>
>> I tried applying this one, but it failed. Patches need to be based against
>> bluetooth-next tree.
>>
>> Applying: ath3k: Add support of MCI 13d3:3408 bt device
>> error: patch failed: drivers/bluetooth/ath3k.c:105
>> error: drivers/bluetooth/ath3k.c: patch does not apply
>> error: patch failed: drivers/bluetooth/btusb.c:182
>> error: drivers/bluetooth/btusb.c: patch does not apply
>> Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device
>>
>> Regards
>>
>> Marcel
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
2014-11-25 17:19 [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin
2014-11-26 5:05 ` Marcel Holtmann
@ 2014-11-26 17:49 ` Johan Hedberg
1 sibling, 0 replies; 8+ messages in thread
From: Johan Hedberg @ 2014-11-26 17:49 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable
Hi Dmitry,
On Tue, Nov 25, 2014, Dmitry Tunin wrote:
> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3408 Rev= 0.02
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
>
> CC: stable@vger.kernel.org
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> ---
I was able to apply this patch successfully. It has now been pushed to
the upstream bluetooth-next tree. Thanks.
Johan
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
@ 2014-11-25 9:48 Dmitry Tunin
0 siblings, 0 replies; 8+ messages in thread
From: Dmitry Tunin @ 2014-11-25 9:48 UTC (permalink / raw)
To: linux-bluetooth, linux-kernel, stable
Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
This bluetooth module requires loading patch and sysconfig by ath3k driver.
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
---
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..086240c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3432) },
/* Atheros AR5BBU12 with sflash firmware */
@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..091c813 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
--
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-12-05 9:18 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-25 17:19 [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin
2014-11-26 5:05 ` Marcel Holtmann
2014-11-26 8:04 ` Dmitry Tunin
2014-11-26 8:50 ` Marcel Holtmann
2014-11-26 8:59 ` Dmitry Tunin
2014-12-05 9:18 ` Michel Memeteau - EKIMIA
2014-11-26 17:49 ` Johan Hedberg
-- strict thread matches above, loose matches on Subject: below --
2014-11-25 9:48 Dmitry Tunin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).