From: Miguel Barrio Orsikowsky <megamik@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: PROBLEM: 0489:e062 [Sony VAIO SVF1531C5E] Bluetooth adapter does not see BT devices
Date: Wed, 31 Dec 2014 12:25:15 +0100 [thread overview]
Message-ID: <54A3DD1B.4040100@gmail.com> (raw)
In-Reply-To: <FB8B7DF3-D835-4270-8932-BAED0DA050BE@holtmann.org>
El 30/12/14 a las 20:09, Marcel Holtmann escribió:
> Hi Miguel,
>
>> [1.] One line summary of the problem:
>>
>> 0489:e062 [Sony VAIO SVF1531C5E] Bluetooth adapter does not see BT devices
>>
>> [2.] Full description of the problem/report:
>>
>> The Bluetooth adapter is detected and apparently working but, when executing "hcitool scan", the device list is always empty: it cannot see any BT device around.
>>
>> But, if I boot into Windows just before booting into Linux, the adapter works perfectly and it sees all BT devices. It seems Windows driver is performing some activation to the BT adapter.
>>
>> Test case:
>> Step 1: power on the Sony VAIO SVF1531C5E and boot into Linux.
>> Step 2: while having around one or more devices with BT enabled and visible, type "hcitool scan" and wait for a few seconds just to see that nothing gets listed.
>> Step 4: reboot the laptop and boot into a Windows partition (mine is Windows 8.1 x64).
>> Step 5: wait until it is completely booted, then just reboot into Linux again.
>> Step 6: while having around one or more devices with BT enabled and visible, type "hcitool scan" and wait for a few seconds just to see all of your devices correctly listed this time. You will be able to pair and use them later without any issue.
>>
>> [3.] Keywords (i.e., modules, networking, kernel):
>>
>> [4.] Kernel version (from /proc/version):
>>
>> Linux version 3.19.0-031900rc2-generic (apw@tangerine) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201412290135 SMP Mon Dec 29 01:36:54 UTC 2014
> just include the content of /sys/kernel/debug/usb/devices for this adapter. I assume it is connected via USB.
Yes, it is integrated and connected via USB:
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e062 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM43142A0
S: SerialNumber=3C77E6DC7494
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Regards,
Miguel.
next prev parent reply other threads:[~2014-12-31 11:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-30 16:30 PROBLEM: 0489:e062 [Sony VAIO SVF1531C5E] Bluetooth adapter does not see BT devices Miguel Barrio Orsikowsky
2014-12-30 19:09 ` Marcel Holtmann
2014-12-31 11:25 ` Miguel Barrio Orsikowsky [this message]
2014-12-31 11:31 ` Marcel Holtmann
2014-12-31 12:54 ` Miguel Barrio Orsikowsky
2014-12-31 22:51 ` Marcel Holtmann
2015-01-01 13:40 ` Miguel Barrio Orsikowsky
2015-01-01 19:47 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54A3DD1B.4040100@gmail.com \
--to=megamik@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).