From: Dmitry Tunin <hanipouspilot@gmail.com>
To: linux-bluetooth <linux-bluetooth@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>, stable@vger.kernel.org
Subject: Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
Date: Sun, 18 Jan 2015 01:03:49 +0300 [thread overview]
Message-ID: <54BADC45.8080306@gmail.com> (raw)
In-Reply-To: <1421529317-25075-1-git-send-email-hanipouspilot@gmail.com>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3423 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 1ee27ac..13a64d0 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -108,6 +108,7 @@ static const struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x13d3, 0x3393) },
> { USB_DEVICE(0x13d3, 0x3402) },
> { USB_DEVICE(0x13d3, 0x3408) },
> + { USB_DEVICE(0x13d3, 0x3423) },
> { USB_DEVICE(0x13d3, 0x3432) },
>
> /* Atheros AR5BBU12 with sflash firmware */
> @@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU22 with sflash firmware */
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 4a6495a..1211c74 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -189,6 +189,7 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU12 with sflash firmware */
>
This was sent by a mistake, when trying to sort out the client.
v2 should be fine.
next prev parent reply other threads:[~2015-01-17 22:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-17 21:15 [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device Dmitry Tunin
2015-01-17 22:03 ` Dmitry Tunin [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-01-16 21:45 Dmitry Tunin
2015-01-17 4:32 ` Marcel Holtmann
2015-01-17 8:26 ` Dmitry Tunin
2015-01-17 18:59 ` Marcel Holtmann
2015-01-17 19:57 ` Dmitry Tunin
2015-01-17 20:05 ` Marcel Holtmann
2015-01-17 16:40 ` Dmitry Tunin
2015-01-17 21:01 ` Dmitry Tunin
2015-01-18 10:57 ` Dmitry Tunin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BADC45.8080306@gmail.com \
--to=hanipouspilot@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).