* [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
@ 2015-01-17 21:15 Dmitry Tunin
2015-01-17 22:03 ` Dmitry Tunin
0 siblings, 1 reply; 11+ messages in thread
From: Dmitry Tunin @ 2015-01-17 21:15 UTC (permalink / raw)
To: linux-bluetooth; +Cc: linux-kernel, Dmitry Tunin, stable
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3423 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Cc: stable@vger.kernel.org
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 1ee27ac..13a64d0 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -108,6 +108,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x13d3, 0x3408) },
+ { USB_DEVICE(0x13d3, 0x3423) },
{ USB_DEVICE(0x13d3, 0x3432) },
/* Atheros AR5BBU12 with sflash firmware */
@@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4a6495a..1211c74 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -189,6 +189,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-17 21:15 [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device Dmitry Tunin
@ 2015-01-17 22:03 ` Dmitry Tunin
0 siblings, 0 replies; 11+ messages in thread
From: Dmitry Tunin @ 2015-01-17 22:03 UTC (permalink / raw)
To: linux-bluetooth; +Cc: linux-kernel, stable
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3423 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 1ee27ac..13a64d0 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -108,6 +108,7 @@ static const struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x13d3, 0x3393) },
> { USB_DEVICE(0x13d3, 0x3402) },
> { USB_DEVICE(0x13d3, 0x3408) },
> + { USB_DEVICE(0x13d3, 0x3423) },
> { USB_DEVICE(0x13d3, 0x3432) },
>
> /* Atheros AR5BBU12 with sflash firmware */
> @@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU22 with sflash firmware */
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 4a6495a..1211c74 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -189,6 +189,7 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU12 with sflash firmware */
>
This was sent by a mistake, when trying to sort out the client.
v2 should be fine.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
@ 2015-01-16 21:45 Dmitry Tunin
2015-01-17 4:32 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Dmitry Tunin @ 2015-01-16 21:45 UTC (permalink / raw)
To: linux-bluetooth; +Cc: linux-kernel, stable@vger.kernel.org
Add support of 13d3:3423 device.
BugLink: https://bugs.launchpad.net/bugs/1411193
---
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3423 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Cc: stable@vger.kernel.org
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 1ee27ac..13a64d0 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -108,6 +108,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x13d3, 0x3408) },
+ { USB_DEVICE(0x13d3, 0x3423) },
{ USB_DEVICE(0x13d3, 0x3432) },
/* Atheros AR5BBU12 with sflash firmware */
@@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4a6495a..1211c74 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -189,6 +189,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-16 21:45 Dmitry Tunin
@ 2015-01-17 4:32 ` Marcel Holtmann
2015-01-17 8:26 ` Dmitry Tunin
2015-01-17 16:40 ` Dmitry Tunin
0 siblings, 2 replies; 11+ messages in thread
From: Marcel Holtmann @ 2015-01-17 4:32 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable@vger.kernel.org
Hi Dmitry,
> Add support of 13d3:3423 device.
>
> BugLink: https://bugs.launchpad.net/bugs/1411193
>
> ---
>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3423 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
your patch does not apply cleanly:
Applying: ath3k: Add support of AR3012 bluetooth 13d3:3423 device
error: patch failed: drivers/bluetooth/ath3k.c:108
error: drivers/bluetooth/ath3k.c: patch does not apply
error: patch failed: drivers/bluetooth/btusb.c:189
error: drivers/bluetooth/btusb.c: patch does not apply
Patch failed at 0001 ath3k: Add support of AR3012 bluetooth 13d3:3423 device
Please send patches that can be applied against bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-17 4:32 ` Marcel Holtmann
@ 2015-01-17 8:26 ` Dmitry Tunin
2015-01-17 18:59 ` Marcel Holtmann
2015-01-17 16:40 ` Dmitry Tunin
1 sibling, 1 reply; 11+ messages in thread
From: Dmitry Tunin @ 2015-01-17 8:26 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel, stable@vger.kernel.org
Hi Marcel,
This patch is against git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
Or is it another branch?
I pulled it again, but still no changes. Why it can be?
17.01.2015 07:32, Marcel Holtmann пишет:
> Hi Dmitry,
>
>> Add support of 13d3:3423 device.
>>
>> BugLink: https://bugs.launchpad.net/bugs/1411193
>>
>> ---
>>
>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=13d3 ProdID=3423 Rev= 0.01
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>> Cc: stable@vger.kernel.org
>> ---
>> drivers/bluetooth/ath3k.c | 2 ++
>> drivers/bluetooth/btusb.c | 1 +
>> 2 files changed, 3 insertions(+)
>
> your patch does not apply cleanly:
>
> Applying: ath3k: Add support of AR3012 bluetooth 13d3:3423 device
> error: patch failed: drivers/bluetooth/ath3k.c:108
> error: drivers/bluetooth/ath3k.c: patch does not apply
> error: patch failed: drivers/bluetooth/btusb.c:189
> error: drivers/bluetooth/btusb.c: patch does not apply
> Patch failed at 0001 ath3k: Add support of AR3012 bluetooth 13d3:3423 device
>
> Please send patches that can be applied against bluetooth-next tree.
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-17 8:26 ` Dmitry Tunin
@ 2015-01-17 18:59 ` Marcel Holtmann
2015-01-17 19:57 ` Dmitry Tunin
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2015-01-17 18:59 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable@vger.kernel.org
Hi Dmitry,
please do not top post on this mailing list.
> This patch is against git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
> Or is it another branch?
>
> I pulled it again, but still no changes. Why it can be?
it neither applies with git am, nor manually running patch.
checking file drivers/bluetooth/ath3k.c
Hunk #1 FAILED at 108.
Hunk #2 FAILED at 162.
2 out of 2 hunks FAILED
checking file drivers/bluetooth/btusb.c
Hunk #1 FAILED at 189.
1 out of 1 hunk FAILED
Regards
Marcel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-17 18:59 ` Marcel Holtmann
@ 2015-01-17 19:57 ` Dmitry Tunin
2015-01-17 20:05 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Dmitry Tunin @ 2015-01-17 19:57 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel, stable@vger.kernel.org
Any ideas what may be wrong? Is the tree URL correct or there is another bluetooth-next branch I dot know about?
I just clean cloned it again and applied with no problem.
17.01.2015 21:59, Marcel Holtmann пишет:
> Hi Dmitry,
>
> please do not top post on this mailing list.
>
>> This patch is against git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
>> Or is it another branch?
>>
>> I pulled it again, but still no changes. Why it can be?
>
> it neither applies with git am, nor manually running patch.
>
> checking file drivers/bluetooth/ath3k.c
> Hunk #1 FAILED at 108.
> Hunk #2 FAILED at 162.
> 2 out of 2 hunks FAILED
> checking file drivers/bluetooth/btusb.c
> Hunk #1 FAILED at 189.
> 1 out of 1 hunk FAILED
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-17 19:57 ` Dmitry Tunin
@ 2015-01-17 20:05 ` Marcel Holtmann
0 siblings, 0 replies; 11+ messages in thread
From: Marcel Holtmann @ 2015-01-17 20:05 UTC (permalink / raw)
To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable@vger.kernel.org
Hi Dmitry,
> Any ideas what may be wrong? Is the tree URL correct or there is another bluetooth-next branch I dot know about?
> I just clean cloned it again and applied with no problem.
I did ask nicely to not top post on this mailing list. Please respect our netiquette.
Save the original email as it arrives on the mailing list and try by yourself. I tried twice now and it just does not apply. It could be well that your email client messed it up somewhere along the lines. Maybe Johan has more luck, but on my tree it does not apply.
Regards
Marcel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
2015-01-17 4:32 ` Marcel Holtmann
2015-01-17 8:26 ` Dmitry Tunin
@ 2015-01-17 16:40 ` Dmitry Tunin
2015-01-17 21:01 ` Dmitry Tunin
1 sibling, 1 reply; 11+ messages in thread
From: Dmitry Tunin @ 2015-01-17 16:40 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel, stable@vger.kernel.org
Marcel,
This patch ckeanly applies both to bluetooth-next and mainline linux tree.
17.01.2015 07:32, Marcel Holtmann пишет:
> Hi Dmitry,
>
>> Add support of 13d3:3423 device.
>>
>> BugLink: https://bugs.launchpad.net/bugs/1411193
>>
>> ---
>>
>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=13d3 ProdID=3423 Rev= 0.01
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>> Cc: stable@vger.kernel.org
>> ---
>> drivers/bluetooth/ath3k.c | 2 ++
>> drivers/bluetooth/btusb.c | 1 +
>> 2 files changed, 3 insertions(+)
>
> your patch does not apply cleanly:
>
> Applying: ath3k: Add support of AR3012 bluetooth 13d3:3423 device
> error: patch failed: drivers/bluetooth/ath3k.c:108
> error: drivers/bluetooth/ath3k.c: patch does not apply
> error: patch failed: drivers/bluetooth/btusb.c:189
> error: drivers/bluetooth/btusb.c: patch does not apply
> Patch failed at 0001 ath3k: Add support of AR3012 bluetooth 13d3:3423 device
>
> Please send patches that can be applied against bluetooth-next tree.
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2015-01-18 10:57 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-17 21:15 [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device Dmitry Tunin
2015-01-17 22:03 ` Dmitry Tunin
-- strict thread matches above, loose matches on Subject: below --
2015-01-16 21:45 Dmitry Tunin
2015-01-17 4:32 ` Marcel Holtmann
2015-01-17 8:26 ` Dmitry Tunin
2015-01-17 18:59 ` Marcel Holtmann
2015-01-17 19:57 ` Dmitry Tunin
2015-01-17 20:05 ` Marcel Holtmann
2015-01-17 16:40 ` Dmitry Tunin
2015-01-17 21:01 ` Dmitry Tunin
2015-01-18 10:57 ` Dmitry Tunin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).