* [PATCH] Bluetooth: hci_ldisc: backport changes
@ 2015-06-26 18:13 Florian Grandel
2015-06-26 18:30 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Florian Grandel @ 2015-06-26 18:13 UTC (permalink / raw)
To: linux-bluetooth
The references to tty->termios in hci_ldisc were not backports
compatible. Introducing #define statements to make this file compile
against earlier kernel versions.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
---
drivers/bluetooth/hci_ldisc.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 177dd69..14d08b1 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -24,6 +24,7 @@
*/
#include <linux/module.h>
+#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -277,7 +278,11 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
if (enable) {
/* Disable hardware flow control */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
ktermios = tty->termios;
+#else
+ ktermios = *tty->termios;
+#endif
ktermios.c_cflag &= ~CRTSCTS;
status = tty_set_termios(tty, &ktermios);
BT_DBG("Disabling hardware flow control: %s",
@@ -311,7 +316,11 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
BT_DBG("Setting RTS: %s", status ? "failed" : "success");
/* Re-enable hardware flow control */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
ktermios = tty->termios;
+#else
+ ktermios = *tty->termios;
+#endif
ktermios.c_cflag |= CRTSCTS;
status = tty_set_termios(tty, &ktermios);
BT_DBG("Enabling hardware flow control: %s",
@@ -332,7 +341,11 @@ void hci_uart_init_tty(struct hci_uart *hu)
struct ktermios ktermios;
/* Bring the UART into a known 8 bits no parity hw fc state */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
ktermios = tty->termios;
+#else
+ ktermios = *tty->termios;
+#endif
ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
INLCR | IGNCR | ICRNL | IXON);
ktermios.c_oflag &= ~OPOST;
@@ -350,7 +363,11 @@ void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
struct tty_struct *tty = hu->tty;
struct ktermios ktermios;
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
ktermios = tty->termios;
+#else
+ ktermios = *tty->termios;
+#endif
ktermios.c_cflag &= ~CBAUD;
tty_termios_encode_baud_rate(&ktermios, speed, speed);
@@ -358,7 +375,7 @@ void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
tty_set_termios(tty, &ktermios);
BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
- tty->termios.c_ispeed, tty->termios.c_ospeed);
+ ktermios.c_ispeed, ktermios.c_ospeed);
}
static int hci_uart_setup(struct hci_dev *hdev)
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] Bluetooth: hci_ldisc: backport changes
2015-06-26 18:13 [PATCH] Bluetooth: hci_ldisc: backport changes Florian Grandel
@ 2015-06-26 18:30 ` Marcel Holtmann
2015-06-26 18:42 ` Florian Grandel
0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2015-06-26 18:30 UTC (permalink / raw)
To: Florian Grandel; +Cc: linux-bluetooth
Hi Florian,
> The references to tty->termios in hci_ldisc were not backports
> compatible. Introducing #define statements to make this file compile
> against earlier kernel versions.
>
> Signed-off-by: Florian Grandel <fgrandel@gmail.com>
> ---
> drivers/bluetooth/hci_ldisc.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
> index 177dd69..14d08b1 100644
> --- a/drivers/bluetooth/hci_ldisc.c
> +++ b/drivers/bluetooth/hci_ldisc.c
> @@ -24,6 +24,7 @@
> */
>
> #include <linux/module.h>
> +#include <linux/version.h>
>
> #include <linux/kernel.h>
> #include <linux/init.h>
> @@ -277,7 +278,11 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
>
> if (enable) {
> /* Disable hardware flow control */
> +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
> ktermios = tty->termios;
> +#else
> + ktermios = *tty->termios;
> +#endif
such a patch is not acceptable upstream. This is something that the backports projects has to keep out-of-tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] Bluetooth: hci_ldisc: backport changes
2015-06-26 18:30 ` Marcel Holtmann
@ 2015-06-26 18:42 ` Florian Grandel
0 siblings, 0 replies; 3+ messages in thread
From: Florian Grandel @ 2015-06-26 18:42 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
On 06/26/2015 08:30 PM, Marcel Holtmann wrote:
> Hi Florian,
>
>> The references to tty->termios in hci_ldisc were not backports
>> compatible. Introducing #define statements to make this file compile
>> against earlier kernel versions.
>>
>> Signed-off-by: Florian Grandel <fgrandel@gmail.com>
>> ---
>> drivers/bluetooth/hci_ldisc.c | 19 ++++++++++++++++++-
>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
>> index 177dd69..14d08b1 100644
>> --- a/drivers/bluetooth/hci_ldisc.c
>> +++ b/drivers/bluetooth/hci_ldisc.c
>> @@ -24,6 +24,7 @@
>> */
>>
>> #include <linux/module.h>
>> +#include <linux/version.h>
>>
>> #include <linux/kernel.h>
>> #include <linux/init.h>
>> @@ -277,7 +278,11 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
>>
>> if (enable) {
>> /* Disable hardware flow control */
>> +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
>> ktermios = tty->termios;
>> +#else
>> + ktermios = *tty->termios;
>> +#endif
>
> such a patch is not acceptable upstream. This is something that the backports projects has to keep out-of-tree.
ah ok - didn't know that, sorry
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-06-26 18:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-26 18:13 [PATCH] Bluetooth: hci_ldisc: backport changes Florian Grandel
2015-06-26 18:30 ` Marcel Holtmann
2015-06-26 18:42 ` Florian Grandel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).