From: Ben Young Tae Kim <ytkim@qca.qualcomm.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: <linux-bluetooth@vger.kernel.org>
Subject: Re: [PATCH 1/2] Bluetooth: btqca: Introduce generic QCA ROME support
Date: Thu, 30 Jul 2015 10:16:51 -0700 [thread overview]
Message-ID: <55BA5C03.9020205@qca.qualcomm.com> (raw)
In-Reply-To: <17F8E500-52D2-45CC-BB6B-F33EB4A0FD28@holtmann.org>
Hi Marcel,
On 07/30/15 04:06, Marcel Holtmann wrote:
> Hi Ben,
>
>> This is for supporting BT for QCA ROME with specific vendor
>> specific HCI commands and initialization. This will have USB/UART
>> implementation both, but for now, adding UART vendor specific
>> commands to patch downloading and set BDaddress using VS command.
>>
>> Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com>
>> ---
>> drivers/bluetooth/Kconfig | 4 +
>> drivers/bluetooth/Makefile | 1 +
>> drivers/bluetooth/btqca.c | 523 +++++++++++++++++++++++++++++++++++++++++++++
>> drivers/bluetooth/btqca.h | 156 ++++++++++++++
>> 4 files changed, 684 insertions(+)
>> create mode 100644 drivers/bluetooth/btqca.c
>> create mode 100644 drivers/bluetooth/btqca.h
>>
>> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
>> index 79e8234..f580334 100644
>> --- a/drivers/bluetooth/Kconfig
>> +++ b/drivers/bluetooth/Kconfig
>> @@ -13,6 +13,10 @@ config BT_RTL
>> tristate
>> select FW_LOADER
>>
>> +config BT_QCA
>> + tristate
>> + select FW_LOADER
>> +
>> config BT_HCIBTUSB
>> tristate "HCI USB driver"
>> depends on USB
>> diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
>> index f40e194..15a0d1d 100644
>> --- a/drivers/bluetooth/Makefile
>> +++ b/drivers/bluetooth/Makefile
>> @@ -22,6 +22,7 @@ obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
>> obj-$(CONFIG_BT_WILINK) += btwilink.o
>> obj-$(CONFIG_BT_BCM) += btbcm.o
>> obj-$(CONFIG_BT_RTL) += btrtl.o
>> +obj-$(CONFIG_BT_QCA) += btqca.o
>>
>> btmrvl-y := btmrvl_main.o
>> btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> new file mode 100644
>> index 0000000..9c1ae6b
>> --- /dev/null
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -0,0 +1,523 @@
>> +/*
>> + * Bluetooth supports for Qualcomm Atheros chips
>> + *
>> + * Copyright (c) 2015 The Linux Foundation. All rights reserved.
> copyright assigned to Linux Foundation is intentional?
Yes
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2
>> + * as published by the Free Software Foundation
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + *
>> + */
>> +#include <linux/module.h>
>> +#include <linux/firmware.h>
>> +#include <asm/unaligned.h>
>> +#include <stdbool.h>
> Why would you include stdbool.h here. That was never needed.
>
>> +
>> +#include <net/bluetooth/bluetooth.h>
>> +#include <net/bluetooth/hci_core.h>
>> +
>> +#include "hci_uart.h"
> You should not need this include. Please do not include driver header files in the common modules.
>
>> +#include "btqca.h"
>> +
>> +#define VERSION "0.1"
>> +
>> +static uint8_t g_qca_user_baud_rate = QCA_BAUDRATE_115200;
> Please stop with the g_ for global variable. I am not even sure how this one would be useful anyway.
>
>> +
>> +static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
>> +{
>> + struct sk_buff *skb;
>> + struct edl_event_hdr *edl;
>> + struct rome_version *ver;
>> + char cmd;
>> + int ret = 0;
> Since the tabs vs spaces is completely messed up, I stopped going through the patch. Please make sure you do this correctly and that your email client/server does not mess this up.
Sorry, I didn't realize all tabs were converted to spaces accidentally on my email client. I'll send you next version to fix all review comments on my patch. Thanks for your review comments.
> Regards
>
> Marcel
>
Thanks
-- Ben Kim
prev parent reply other threads:[~2015-07-30 17:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-30 1:31 [PATCH 1/2] Bluetooth: btqca: Introduce generic QCA ROME support Ben Young Tae Kim
2015-07-30 11:06 ` Marcel Holtmann
2015-07-30 17:16 ` Ben Young Tae Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BA5C03.9020205@qca.qualcomm.com \
--to=ytkim@qca.qualcomm.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).