From: Heiner Kallweit <hkallweit1@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>,
BlueZ development <linux-bluetooth@vger.kernel.org>
Subject: [PATCH v4] bluetooth: core: add LED trigger for indicating HCI is powered up
Date: Fri, 8 Jan 2016 19:28:58 +0100 [thread overview]
Message-ID: <568FFFEA.9060303@gmail.com> (raw)
Add support for LED triggers to the bluetooth core and add kernel config
symbol BT_LEDS for it.
For now one trigger for indicating "HCI is powered up" is supported.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- completely rewrote the code to be as generic as possible and minimize
the changes to struct hci_dev
- make the details of the LED triggers opaque to struct hci_dev
- avoid using ifdef CONFIG_BT_LEDS in hci_core.h
- start with the radio trigger only
- factor out the generic basic led trigger code to facilitate adding
further basic LED triggers
- fix indentation in Kconfig
- rename led.[ch] to leds.[ch]
v3:
- use term power instead of radio
- rename hci_led_ to hci_leds_
- remove the counter
- use IS_ENABLED for checking the config option
v4:
- rework commit message
- shorten static function names
- remove empty line at end of file
---
include/net/bluetooth/hci_core.h | 3 ++
net/bluetooth/Kconfig | 9 +++++
net/bluetooth/Makefile | 1 +
net/bluetooth/hci_core.c | 8 ++++
net/bluetooth/leds.c | 80 ++++++++++++++++++++++++++++++++++++++++
net/bluetooth/leds.h | 18 +++++++++
6 files changed, 119 insertions(+)
create mode 100644 net/bluetooth/leds.c
create mode 100644 net/bluetooth/leds.h
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index c95e032..0f084b4 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -25,6 +25,7 @@
#ifndef __HCI_CORE_H
#define __HCI_CORE_H
+#include <linux/leds.h>
#include <net/bluetooth/hci.h>
#include <net/bluetooth/hci_sock.h>
@@ -395,6 +396,8 @@ struct hci_dev {
struct delayed_work rpa_expired;
bdaddr_t rpa;
+ struct led_trigger *power_led;
+
int (*open)(struct hci_dev *hdev);
int (*close)(struct hci_dev *hdev);
int (*flush)(struct hci_dev *hdev);
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 95d1a66..06c31b9 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -69,6 +69,15 @@ config BT_6LOWPAN
help
IPv6 compression over Bluetooth Low Energy.
+config BT_LEDS
+ bool "Enable LED triggers"
+ depends on BT
+ depends on LEDS_CLASS
+ select LEDS_TRIGGERS
+ help
+ This option selects a few LED triggers for different
+ Bluetooth events.
+
config BT_SELFTEST
bool "Bluetooth self testing support"
depends on BT && DEBUG_KERNEL
diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile
index 2b15ae8..b3ff12e 100644
--- a/net/bluetooth/Makefile
+++ b/net/bluetooth/Makefile
@@ -17,6 +17,7 @@ bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
bluetooth-$(CONFIG_BT_BREDR) += sco.o
bluetooth-$(CONFIG_BT_HS) += a2mp.o amp.o
+bluetooth-$(CONFIG_BT_LEDS) += leds.o
bluetooth-$(CONFIG_BT_DEBUGFS) += hci_debugfs.o
bluetooth-$(CONFIG_BT_SELFTEST) += selftest.o
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 47bcef7..06f603a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -40,6 +40,7 @@
#include "hci_request.h"
#include "hci_debugfs.h"
#include "smp.h"
+#include "leds.h"
static void hci_rx_work(struct work_struct *work);
static void hci_cmd_work(struct work_struct *work);
@@ -1395,6 +1396,7 @@ static int hci_dev_do_open(struct hci_dev *hdev)
hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
set_bit(HCI_UP, &hdev->flags);
hci_sock_dev_event(hdev, HCI_DEV_UP);
+ hci_leds_update_powered(hdev, true);
if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
!hci_dev_test_flag(hdev, HCI_CONFIG) &&
!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
@@ -1532,6 +1534,8 @@ int hci_dev_do_close(struct hci_dev *hdev)
return 0;
}
+ hci_leds_update_powered(hdev, false);
+
/* Flush RX and TX works */
flush_work(&hdev->tx_work);
flush_work(&hdev->rx_work);
@@ -3067,6 +3071,8 @@ int hci_register_dev(struct hci_dev *hdev)
if (error < 0)
goto err_wqueue;
+ hci_leds_init(hdev);
+
hdev->rfkill = rfkill_alloc(hdev->name, &hdev->dev,
RFKILL_TYPE_BLUETOOTH, &hci_rfkill_ops,
hdev);
@@ -3128,6 +3134,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
id = hdev->id;
+ hci_leds_exit(hdev);
+
write_lock(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock(&hci_dev_list_lock);
diff --git a/net/bluetooth/leds.c b/net/bluetooth/leds.c
new file mode 100644
index 0000000..ded7c88
--- /dev/null
+++ b/net/bluetooth/leds.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2015, Heiner Kallweit <hkallweit1@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "leds.h"
+
+struct hci_basic_led_trigger {
+ struct led_trigger led_trigger;
+ struct hci_dev *hdev;
+};
+
+#define to_hci_basic_led_trigger(arg) container_of(arg, \
+ struct hci_basic_led_trigger, led_trigger)
+
+void hci_leds_update_powered(struct hci_dev *hdev, bool enabled)
+{
+ if (hdev->power_led)
+ led_trigger_event(hdev->power_led,
+ enabled ? LED_FULL : LED_OFF);
+}
+
+static void power_activate(struct led_classdev *led_cdev)
+{
+ struct hci_basic_led_trigger *htrig;
+ bool powered;
+
+ htrig = to_hci_basic_led_trigger(led_cdev->trigger);
+ powered = test_bit(HCI_UP, &htrig->hdev->flags);
+
+ led_trigger_event(led_cdev->trigger, powered ? LED_FULL : LED_OFF);
+}
+
+static struct led_trigger *led_allocate_basic(struct hci_dev *hdev,
+ void (*activate)(struct led_classdev *led_cdev),
+ const char *name)
+{
+ struct hci_basic_led_trigger *htrig;
+
+ htrig = devm_kzalloc(&hdev->dev, sizeof(*htrig), GFP_KERNEL);
+ if (!htrig)
+ return NULL;
+
+ htrig->hdev = hdev;
+ htrig->led_trigger.activate = activate;
+ htrig->led_trigger.name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
+ "%s-%s", hdev->name,
+ name);
+ if (!htrig->led_trigger.name)
+ goto err_alloc;
+
+ if (led_trigger_register(&htrig->led_trigger))
+ goto err_register;
+
+ return &htrig->led_trigger;
+
+err_register:
+ devm_kfree(&hdev->dev, (void *)htrig->led_trigger.name);
+err_alloc:
+ devm_kfree(&hdev->dev, htrig);
+ return NULL;
+}
+
+void hci_leds_init(struct hci_dev *hdev)
+{
+ /* initialize power_led */
+ hdev->power_led = led_allocate_basic(hdev, power_activate, "power");
+}
+
+void hci_leds_exit(struct hci_dev *hdev)
+{
+ if (hdev->power_led)
+ led_trigger_unregister(hdev->power_led);
+}
diff --git a/net/bluetooth/leds.h b/net/bluetooth/leds.h
new file mode 100644
index 0000000..068261a
--- /dev/null
+++ b/net/bluetooth/leds.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2015, Heiner Kallweit <hkallweit1@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#if IS_ENABLED(CONFIG_BT_LEDS)
+void hci_leds_update_powered(struct hci_dev *hdev, bool enabled);
+void hci_leds_init(struct hci_dev *hdev);
+void hci_leds_exit(struct hci_dev *hdev);
+#else
+static inline void hci_leds_update_powered(struct hci_dev *hdev,
+ bool enabled) {}
+static inline void hci_leds_init(struct hci_dev *hdev) {}
+static inline void hci_leds_exit(struct hci_dev *hdev) {}
+#endif
--
2.6.4
next reply other threads:[~2016-01-08 18:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-08 18:28 Heiner Kallweit [this message]
2016-01-08 22:14 ` [PATCH v4] bluetooth: core: add LED trigger for indicating HCI is powered up Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=568FFFEA.9060303@gmail.com \
--to=hkallweit1@gmail.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox