linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
To: Alexander Aring <aar@pengutronix.de>, linux-wpan@vger.kernel.org
Cc: hideaki.yoshifuji@miraclelinux.com, kernel@pengutronix.de,
	marcel@holtmann.org, jukka.rissanen@linux.intel.com,
	hannes@stressinduktion.org, stefan@osg.samsung.com,
	mcr@sandelman.ca, werner@almesberger.net,
	linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
	"David S . Miller" <davem@davemloft.net>
Subject: Re: [PATCHv3 net-next 01/12] 6lowpan: add private neighbour data
Date: Wed, 15 Jun 2016 20:05:11 +0900	[thread overview]
Message-ID: <57613667.7040308@miraclelinux.com> (raw)
In-Reply-To: <20160614115239.17788-2-aar@pengutronix.de>



Alexander Aring wrote:
> This patch will introduce a 6lowpan neighbour private data. Like the
> interface private data we handle private data for generic 6lowpan and
> for link-layer specific 6lowpan.
> 
> The current first use case if to save the short address for a 802.15.4
> 6lowpan neighbour.
> 
> Cc: David S. Miller <davem@davemloft.net>
> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
> Signed-off-by: Alexander Aring <aar@pengutronix.de>

Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

> ---
>  include/linux/netdevice.h     |  3 +--
>  include/net/6lowpan.h         | 10 ++++++++++
>  net/ieee802154/6lowpan/core.c | 12 ++++++++++++
>  3 files changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
> index d101e4d..36e43bd 100644
> --- a/include/linux/netdevice.h
> +++ b/include/linux/netdevice.h
> @@ -1483,8 +1483,7 @@ enum netdev_priv_flags {
>   * 	@perm_addr:		Permanent hw address
>   * 	@addr_assign_type:	Hw address assignment type
>   * 	@addr_len:		Hardware address length
> - * 	@neigh_priv_len;	Used in neigh_alloc(),
> - * 				initialized only in atm/clip.c
> + *	@neigh_priv_len:	Used in neigh_alloc()
>   * 	@dev_id:		Used to differentiate devices that share
>   * 				the same link layer address
>   * 	@dev_port:		Used to differentiate devices that share
> diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
> index da84cf9..2d9b9d3 100644
> --- a/include/net/6lowpan.h
> +++ b/include/net/6lowpan.h
> @@ -141,6 +141,16 @@ struct lowpan_dev {
>  	u8 priv[0] __aligned(sizeof(void *));
>  };
>  
> +struct lowpan_802154_neigh {
> +	__le16 short_addr;
> +};
> +
> +static inline
> +struct lowpan_802154_neigh *lowpan_802154_neigh(void *neigh_priv)
> +{
> +	return neigh_priv;
> +}
> +
>  static inline
>  struct lowpan_dev *lowpan_dev(const struct net_device *dev)
>  {
> diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
> index 4e2b308..8c004a0 100644
> --- a/net/ieee802154/6lowpan/core.c
> +++ b/net/ieee802154/6lowpan/core.c
> @@ -81,11 +81,21 @@ static int lowpan_stop(struct net_device *dev)
>  	return 0;
>  }
>  
> +static int lowpan_neigh_construct(struct neighbour *n)
> +{
> +	struct lowpan_802154_neigh *neigh = lowpan_802154_neigh(neighbour_priv(n));
> +
> +	/* default no short_addr is available for a neighbour */
> +	neigh->short_addr = cpu_to_le16(IEEE802154_ADDR_SHORT_UNSPEC);
> +	return 0;
> +}
> +
>  static const struct net_device_ops lowpan_netdev_ops = {
>  	.ndo_init		= lowpan_dev_init,
>  	.ndo_start_xmit		= lowpan_xmit,
>  	.ndo_open		= lowpan_open,
>  	.ndo_stop		= lowpan_stop,
> +	.ndo_neigh_construct    = lowpan_neigh_construct,
>  };
>  
>  static void lowpan_setup(struct net_device *ldev)
> @@ -150,6 +160,8 @@ static int lowpan_newlink(struct net *src_net, struct net_device *ldev,
>  				wdev->needed_headroom;
>  	ldev->needed_tailroom = wdev->needed_tailroom;
>  
> +	ldev->neigh_priv_len = sizeof(struct lowpan_802154_neigh);
> +
>  	ret = lowpan_register_netdevice(ldev, LOWPAN_LLTYPE_IEEE802154);
>  	if (ret < 0) {
>  		dev_put(wdev);
> 

-- 
Hideaki Yoshifuji <hideaki.yoshifuji@miraclelinux.com>
Technical Division, MIRACLE LINUX CORPORATION

  reply	other threads:[~2016-06-15 11:05 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-14 11:52 [PATCHv3 net-next 00/12] 6lowpan: introduce 6lowpan-nd Alexander Aring
2016-06-14 11:52 ` [PATCHv3 net-next 01/12] 6lowpan: add private neighbour data Alexander Aring
2016-06-15 11:05   ` YOSHIFUJI Hideaki [this message]
2016-06-14 11:52 ` [PATCHv3 net-next 02/12] 6lowpan: add 802.15.4 short addr slaac Alexander Aring
2016-06-14 11:52 ` [PATCHv3 net-next 03/12] 6lowpan: remove ipv6 module request Alexander Aring
2016-06-14 11:52 ` [PATCHv3 net-next 04/12] ndisc: add __ndisc_opt_addr_space function Alexander Aring
2016-06-15 11:07   ` YOSHIFUJI Hideaki
2016-06-15 15:09   ` Stefan Schmidt
2016-06-14 11:52 ` [PATCHv3 net-next 05/12] ndisc: add __ndisc_opt_addr_data function Alexander Aring
2016-06-15 11:07   ` YOSHIFUJI Hideaki
2016-06-15 15:11   ` Stefan Schmidt
2016-06-14 11:52 ` [PATCHv3 net-next 06/12] ndisc: add __ndisc_fill_addr_option function Alexander Aring
2016-06-15 11:08   ` YOSHIFUJI Hideaki
2016-06-15 15:13   ` Stefan Schmidt
2016-06-14 11:52 ` [PATCHv3 net-next 07/12] addrconf: put prefix address add in an own function Alexander Aring
2016-06-15 11:09   ` YOSHIFUJI Hideaki
2016-06-14 11:52 ` [PATCHv3 net-next 08/12] ipv6: introduce neighbour discovery ops Alexander Aring
2016-06-15 11:10   ` YOSHIFUJI Hideaki/吉藤英明
2016-06-14 11:52 ` [PATCHv3 net-next 09/12] ipv6: export several functions Alexander Aring
2016-06-15 11:11   ` YOSHIFUJI Hideaki
2016-06-15 15:18   ` Stefan Schmidt
2016-06-14 11:52 ` [PATCHv3 net-next 10/12] 6lowpan: introduce 6lowpan-nd Alexander Aring
2016-06-15 11:12   ` YOSHIFUJI Hideaki
2016-06-14 11:52 ` [PATCHv3 net-next 11/12] 6lowpan: add support for getting short address Alexander Aring
2016-06-14 11:52 ` [PATCHv3 net-next 12/12] 6lowpan: add support for 802.15.4 short addr handling Alexander Aring
2016-06-15 11:03 ` [PATCHv3 net-next 00/12] 6lowpan: introduce 6lowpan-nd YOSHIFUJI Hideaki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57613667.7040308@miraclelinux.com \
    --to=hideaki.yoshifuji@miraclelinux.com \
    --cc=aar@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=hannes@stressinduktion.org \
    --cc=jukka.rissanen@linux.intel.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-wpan@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mcr@sandelman.ca \
    --cc=netdev@vger.kernel.org \
    --cc=stefan@osg.samsung.com \
    --cc=werner@almesberger.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).