From: George <george.news@gmx.net>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Bluez BNEP connection close
Date: Mon, 24 Jan 2005 19:24:39 +0100 [thread overview]
Message-ID: <6.1.2.0.2.20050124192058.04bee240@pop.gmx.net> (raw)
In-Reply-To: <6.1.2.0.2.20050124182813.04216860@pop.gmx.net>
OOpssss ... It wasn't the solution
I have remove the SCO totally removed and still facing the same problem.
Thanks for your help and sorry for bothering all of you, but I have to show
my application in a short while and I want it to be as stable as possible.
And my .config for the USB Devices
#
# Bluetooth support
#
CONFIG_BLUEZ=y
CONFIG_BLUEZ_L2CAP=y
# CONFIG_BLUEZ_SCO is not set
CONFIG_BLUEZ_RFCOMM=y
CONFIG_BLUEZ_RFCOMM_TTY=y
CONFIG_BLUEZ_BNEP=y
CONFIG_BLUEZ_BNEP_MC_FILTER=y
CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
CONFIG_BLUEZ_HIDP=y
#
# Bluetooth device drivers
#
CONFIG_BLUEZ_HCIUSB=y
# CONFIG_BLUEZ_HCIUSB_SCO is not set
CONFIG_BLUEZ_HCIUART=y
CONFIG_BLUEZ_HCIUART_H4=y
CONFIG_BLUEZ_HCIUART_BCSP=y
CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
CONFIG_BLUEZ_HCIBFUSB=y
CONFIG_BLUEZ_HCIVHCI=y
Here it is my /proc/bus/usb/devices
[root@s root]# cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1860
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 23/900 us ( 3%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1840
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a12 ProdID=0001 Rev= 5.25
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1820
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.28-mh1 ehci_hcd
S: Product=Intel Corp. 82801DB USB2
S: SerialNumber=00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
At 18:33 24/01/2005, George wrote:
>At 17:47 24/01/2005, Marcel Holtmann wrote:
>
> >is the SCO support for the hci_usb driver compiled in? Maybe this takes
> >away the USB bandwidth and this can result in troubles with a 2.4 kernel
> >and its USB subsystem. With a 2.6 kernel you can disable this with the
> >module parameter isoc, but I doubt that this is possible with a 2.4
> >kernel.
>
>Great... I have the SCO support compiled. So you recommend that I remove
it???
>
>I will do so and hope it works ;)
>
>Let you know in a while ;)
>
>REgards.
>
> >
> >Regards
> >
> >Marcel
> >
> >
> >
> >
> >-------------------------------------------------------
> >This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> >Tool for open source databases. Create drag-&-drop reports. Save time
> >by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> >Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> >_______________________________________________
> >Bluez-users mailing list
> >Bluez-users@lists.sourceforge.net
> >https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
>Tool for open source databases. Create drag-&-drop reports. Save time
>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
>Download a FREE copy at http://www.intelliview.com/go/osdn_nl
>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-01-24 18:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-24 16:06 [Bluez-users] Bluez BNEP connection close George
2005-01-24 15:49 ` Marcel Holtmann
2005-01-24 16:46 ` George
2005-01-24 16:23 ` Michal Semler
2005-01-24 16:23 ` Marcel Holtmann
2005-01-24 17:04 ` George
2005-01-24 16:47 ` Marcel Holtmann
2005-01-24 17:33 ` George
2005-01-24 17:14 ` Marcel Holtmann
2005-01-24 18:24 ` George [this message]
2005-01-24 18:04 ` Marcel Holtmann
2005-01-24 18:37 ` George
2005-01-25 8:33 ` George
2005-01-25 12:32 ` Marcel Holtmann
2005-01-26 18:18 ` George
2005-01-24 18:10 ` Michael McConnell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6.1.2.0.2.20050124192058.04bee240@pop.gmx.net \
--to=george.news@gmx.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox