Linux bluetooth development
 help / color / mirror / Atom feed
From: Albert Schmid <aschmid@bawue.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] No hci-Device available
Date: Tue, 01 Nov 2005 10:38:32 +0100	[thread overview]
Message-ID: <6.2.0.14.0.20051101102405.027aa348@mail.bawue.de> (raw)

Hello,

I tried to use a spare bluetooth stick at my older PC with
Suse 7.3. I checked the kernel config to have USD and Bluetooth
kernel modules available and compiled. Then I downloaded
bluez-libs and bluez-utils software packages and compiled both
successfully. I installed the libs and the utils on my machine
and they seem to work so far (I got help messages,...).

After than I tried the hcitool dev command, but no device is
available. I used modprobe to start hci_usb.o module and I don't
get any error message at the terminal. The lsmod command lists
the modules of the kernel:

Module                  Size  Used by
...
hci_usb                 5120   0
hci                    17344   0  [hci_usb]
bluetooth              17296   1
...
usb-ohci               17680   0  (unused)
usbcore                47264   1  [hci_usb bluetooth usb-ohci]
...


(Ireduced the list)

It seems the bluetooth kernel support is available...

Then I checked my syslog entries and found:

Nov  1 10:53:33 bob kernel: hub.c: 2 ports detected
Nov  1 10:53:33 bob kernel: hub.c: USB new device connect on bus1/2, 
assigned device number 2
Nov  1 10:53:33 bob kernel: usb.c: USB device 2 (vend/prod 0xa12/0x1) is 
not claimed by any active driver.
Nov  1 10:53:33 bob kernel: IPv6 v0.8 for NET4.0
Nov  1 10:53:33 bob kernel: IPv6 over IPv4 tunneling driver
Nov  1 10:53:33 bob kernel: bluetooth.c: USB Bluetooth support registered
Nov  1 10:53:33 bob kernel: usb.c: registered new driver bluetooth
Nov  1 10:53:33 bob kernel: bluetooth.c: found interrupt in
Nov  1 10:53:33 bob kernel: bluetooth.c: found bulk out
Nov  1 10:53:33 bob kernel: bluetooth.c: found bulk in
Nov  1 10:53:33 bob kernel: bluetooth.c: USB Bluetooth converter detected
Nov  1 10:53:33 bob kernel: bluetooth.c: Bluetooth converter now attached 
to ttyUB0 (or usb/ttub/0 for devfs)
Nov  1 10:53:33 bob kernel: bluetooth.c: usb_bluetooth_probe - improper 
number of endpoints. Bluetooth driver not bound.
Nov  1 10:53:33 bob last message repeated 6 times
Nov  1 10:53:33 bob kernel: bluetooth.c: USB Bluetooth tty driver v0.12
Nov  1 10:53:33 bob kernel: BlueZ HCI Core ver 1.1 Copyright (C) 2000,2001 
Qualcomm Inc
Nov  1 10:53:33 bob kernel: Written 2000,2001 by Maxim Krasnyansky 
<maxk@qualcomm.com>
Nov  1 10:53:33 bob kernel: BlueZ HCI USB driver ver 1.0 Copyright (C) 
2000,2001 Qualcomm Inc
Nov  1 10:53:33 bob kernel: Written 2000,2001 by Maxim Krasnyansky 
<maxk@qualcomm.com>
Nov  1 10:53:33 bob kernel: usb.c: registered new driver hci_usb
Nov  1 10:53:33 bob kernel: bluetooth.c: usb_bluetooth_probe - improper 
number of endpoints. Bluetooth driver not bound.


It seems that there is still something wrong with the driver.

Can anybody help me with the correct/missing /etc/modules.conf
entries?

If the hci_usb-Driver is registered correctly, why do I haven't
found any hci-device-file ind the /dev directory?

Do I really need to download 37MB for an newer 2.4.31 kernel to
access the bloototh stick? - I use 2.4.10 compiled by Suse.

I searched the mail-list*s archive but I haven't found any
appropriete to my problem.

Thank you in advance,

Albert Schmid

====================================================================
     Albert Schmid                   aschmid@bawue.de
                                     http://www.bawue.de/~aschmid
====================================================================
   PGP Fingerprint: 02 F4 E5 03 9A E3 84 57  93 A6 44 B6 C8 E2 AA D3
GnuPG Fingerprint: 103F C8A5 C8FF 47E6 CBDA FCF3 829C 8EF3 C262 5CB3
====================================================================



-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

             reply	other threads:[~2005-11-01  9:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-01  9:38 Albert Schmid [this message]
2005-11-01 10:18 ` [Bluez-users] No hci-Device available Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6.2.0.14.0.20051101102405.027aa348@mail.bawue.de \
    --to=aschmid@bawue.de \
    --cc=bluez-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox