* [PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500)
@ 2021-05-18 17:25 Daniel Lenski
2021-05-18 18:37 ` bluez.test.bot
2021-05-20 15:12 ` [PATCH] " Marcel Holtmann
0 siblings, 2 replies; 6+ messages in thread
From: Daniel Lenski @ 2021-05-18 17:25 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Daniel Lenski
This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a
QCA_ROME device. It appears to be functionally identical to another device
ID, also from a QCA9377 board, which was previously marked as QCA_ROME in
0a03f98b98c201191e3ba15a0e33f46d8660e1fd
("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
Without this patch, the WiFi side of the QCA9377 board is slow or unusable
when the Bluetooth side is in use.
See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing
this issue for this device ID.
/sys/kernel/debug/usb/devices:
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e500 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5d603ef39..ba339e074 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -270,6 +270,8 @@ static const struct usb_device_id blacklist_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME |
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* RE: Bluetooth: Add a new QCA_ROME device (0cf3:e500)
2021-05-18 17:25 [PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500) Daniel Lenski
@ 2021-05-18 18:37 ` bluez.test.bot
2021-05-20 15:12 ` [PATCH] " Marcel Holtmann
1 sibling, 0 replies; 6+ messages in thread
From: bluez.test.bot @ 2021-05-18 18:37 UTC (permalink / raw)
To: linux-bluetooth, dlenski
[-- Attachment #1: Type: text/plain, Size: 3278 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=484479
---Test result---
Test Summary:
CheckPatch FAIL 0.49 seconds
GitLint PASS 0.11 seconds
BuildKernel PASS 562.85 seconds
TestRunner: Setup PASS 366.25 seconds
TestRunner: l2cap-tester PASS 2.74 seconds
TestRunner: bnep-tester PASS 1.99 seconds
TestRunner: mgmt-tester PASS 27.50 seconds
TestRunner: rfcomm-tester PASS 2.17 seconds
TestRunner: sco-tester PASS 2.15 seconds
TestRunner: smp-tester PASS 2.25 seconds
TestRunner: userchan-tester PASS 1.97 seconds
Details
##############################
Test: CheckPatch - FAIL - 0.49 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
Bluetooth: Add a new QCA_ROME device (0cf3:e500)
ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit fatal: bad o ("a0e33f46d8660e1fd")'
#9:
0a03f98b98c201191e3ba15a0e33f46d8660e1fd
total: 1 errors, 0 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500)" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - PASS - 0.11 seconds
Run gitlint with rule in .gitlint
##############################
Test: BuildKernel - PASS - 562.85 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 366.25 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.74 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 1.99 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 27.50 seconds
Run test-runner with mgmt-tester
Total: 416, Passed: 403 (96.9%), Failed: 0, Not Run: 13
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.17 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.15 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - PASS - 2.25 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: userchan-tester - PASS - 1.97 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44230 bytes --]
[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3557 bytes --]
[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 546745 bytes --]
[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11677 bytes --]
[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9912 bytes --]
[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11821 bytes --]
[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5454 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500)
2021-05-18 17:25 [PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500) Daniel Lenski
2021-05-18 18:37 ` bluez.test.bot
@ 2021-05-20 15:12 ` Marcel Holtmann
1 sibling, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2021-05-20 15:12 UTC (permalink / raw)
To: Daniel Lenski; +Cc: linux-bluetooth
Hi Daniel,
> This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a
> QCA_ROME device. It appears to be functionally identical to another device
> ID, also from a QCA9377 board, which was previously marked as QCA_ROME in
> 0a03f98b98c201191e3ba15a0e33f46d8660e1fd
> ("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
>
> Without this patch, the WiFi side of the QCA9377 board is slow or unusable
> when the Bluetooth side is in use.
>
> See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing
> this issue for this device ID.
>
> /sys/kernel/debug/usb/devices:
>
> T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=e500 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Daniel Lenski <dlenski@gmail.com>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500)
@ 2021-05-18 18:59 Daniel Lenski
2021-05-18 19:31 ` bluez.test.bot
0 siblings, 1 reply; 6+ messages in thread
From: Daniel Lenski @ 2021-05-18 18:59 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Daniel Lenski
This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a
QCA_ROME device. It appears to be functionally identical to another device
ID, also from a QCA9377 board, which was previously marked as QCA_ROME in
commit 0a03f98b98c2 ("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
Without this patch, the WiFi side of the QCA9377 board is slow or unusable
when the Bluetooth side is in use.
See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing
this issue for this device ID.
/sys/kernel/debug/usb/devices:
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e500 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5d603ef39..ba339e074 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -270,6 +270,8 @@ static const struct usb_device_id blacklist_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME |
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* RE: Bluetooth: Add a new QCA_ROME device (0cf3:e500)
2021-05-18 18:59 Daniel Lenski
@ 2021-05-18 19:31 ` bluez.test.bot
2021-05-18 21:41 ` Daniel Lenski
0 siblings, 1 reply; 6+ messages in thread
From: bluez.test.bot @ 2021-05-18 19:31 UTC (permalink / raw)
To: linux-bluetooth, dlenski
[-- Attachment #1: Type: text/plain, Size: 3238 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=484533
---Test result---
Test Summary:
CheckPatch FAIL 0.84 seconds
GitLint PASS 0.13 seconds
BuildKernel PASS 589.44 seconds
TestRunner: Setup PASS 390.88 seconds
TestRunner: l2cap-tester PASS 2.83 seconds
TestRunner: bnep-tester PASS 2.04 seconds
TestRunner: mgmt-tester PASS 28.94 seconds
TestRunner: rfcomm-tester PASS 2.26 seconds
TestRunner: sco-tester PASS 2.14 seconds
TestRunner: smp-tester PASS 2.27 seconds
TestRunner: userchan-tester PASS 2.00 seconds
Details
##############################
Test: CheckPatch - FAIL - 0.84 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
Bluetooth: Add a new QCA_ROME device (0cf3:e500)
WARNING: Unknown commit id '0a03f98b98c2', maybe rebased or not pulled?
#9:
commit 0a03f98b98c2 ("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
total: 0 errors, 1 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500)" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - PASS - 0.13 seconds
Run gitlint with rule in .gitlint
##############################
Test: BuildKernel - PASS - 589.44 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 390.88 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.83 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 2.04 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 28.94 seconds
Run test-runner with mgmt-tester
Total: 416, Passed: 403 (96.9%), Failed: 0, Not Run: 13
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.26 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.14 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - PASS - 2.27 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: userchan-tester - PASS - 2.00 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44230 bytes --]
[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3556 bytes --]
[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 546745 bytes --]
[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11677 bytes --]
[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9912 bytes --]
[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11823 bytes --]
[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5454 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Bluetooth: Add a new QCA_ROME device (0cf3:e500)
2021-05-18 19:31 ` bluez.test.bot
@ 2021-05-18 21:41 ` Daniel Lenski
2021-05-18 21:58 ` Tedd Ho-Jeong An
0 siblings, 1 reply; 6+ messages in thread
From: Daniel Lenski @ 2021-05-18 21:41 UTC (permalink / raw)
To: linux-bluetooth
Hi all,
I'm somewhat confused about why CheckPatch is failing to approve this
patch. It says that a commit referenced in the commit message does not
exist:
On Tue, May 18, 2021 at 12:31 PM <bluez.test.bot@gmail.com> wrote:
> Test: CheckPatch - FAIL - 0.84 seconds
> Run checkpatch.pl script with rule in .checkpatch.conf
> Bluetooth: Add a new QCA_ROME device (0cf3:e500)
> WARNING: Unknown commit id '0a03f98b98c2', maybe rebased or not pulled?
> #9:
> commit 0a03f98b98c2 ("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
However, this commit *does* exist, and it is — as far as I can tell —
the *only* commit which exists with this text in its title.
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0a03f98b98c201191e3ba15a0e33f46d8660e1fd
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?qt=grep&q=Add+a+new+04ca%3A3015+QCA_ROME+device
Any suggestions about how to resolve this?
-Dan Lenski
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Bluetooth: Add a new QCA_ROME device (0cf3:e500)
2021-05-18 21:41 ` Daniel Lenski
@ 2021-05-18 21:58 ` Tedd Ho-Jeong An
0 siblings, 0 replies; 6+ messages in thread
From: Tedd Ho-Jeong An @ 2021-05-18 21:58 UTC (permalink / raw)
To: Daniel Lenski, linux-bluetooth
Hi Dan
On Tue, 2021-05-18 at 14:41 -0700, Daniel Lenski wrote:
> Hi all,
> I'm somewhat confused about why CheckPatch is failing to approve this
> patch. It says that a commit referenced in the commit message does not
> exist:
>
> On Tue, May 18, 2021 at 12:31 PM <bluez.test.bot@gmail.com> wrote:
> > Test: CheckPatch - FAIL - 0.84 seconds
> > Run checkpatch.pl script with rule in .checkpatch.conf
> > Bluetooth: Add a new QCA_ROME device (0cf3:e500)
> > WARNING: Unknown commit id '0a03f98b98c2', maybe rebased or not pulled?
> > #9:
> > commit 0a03f98b98c2 ("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
>
> However, this commit *does* exist, and it is — as far as I can tell —
> the *only* commit which exists with this text in its title.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0a03f98b98c201191e3ba15a0e33f46d8660e1fd
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?qt=grep&q=Add+a+new+04ca%3A3015+QCA_ROME+device
>
> Any suggestions about how to resolve this?
You can ignore this error.
This is an issue in the CI which is not pulling the entire kernel tree to
reduce the running time.
>
> -Dan Lenski
Regards,
Tedd
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-20 15:12 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-05-18 17:25 [PATCH] Bluetooth: Add a new QCA_ROME device (0cf3:e500) Daniel Lenski
2021-05-18 18:37 ` bluez.test.bot
2021-05-20 15:12 ` [PATCH] " Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2021-05-18 18:59 Daniel Lenski
2021-05-18 19:31 ` bluez.test.bot
2021-05-18 21:41 ` Daniel Lenski
2021-05-18 21:58 ` Tedd Ho-Jeong An
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).