Re: [RESEND] Bluetooth: btrtl: Add support for RTL8852BS

Paul Menzel
2023-02-06T10:05:29Z

Dear Victor,

Thank you for your patch.

Am 06.02.23 um 07:33 schrieb Victor Hassan:
> Add the support for RTL8852BS BT controller on UART interface.
> The necessary firmware file will be submitted to linux-firmware.
>
> Signed-off-by: Victor Hassan <victor@allwinnertech.com>
> ---
> drivers/bluetooth/btrtl.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index 69c3fe649ca7..36c3a23324f8 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -198,6 +198,14 @@ static const struct id_table ic_id_table[] = {
> .fw_name = "rtl_bt/rtl8852bu_fw.bin",
> .cfg_name = "rtl_bt/rtl8852bu_config" },
>
> + /* 8852B with UART interface */
> + { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
> + .config_needed = true,
> + .has_rom_version = true,
> + .has_msft_ext = true,
> + .fw_name = "rtl_bt/rtl8852bs_fw.bin",
> + .cfg_name = "rtl_bt/rtl8852bs_config" },
> +

I’d sort *bs* before *bu*.

> /* 8852C */
> { IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
> .config_needed = false,
> @@ -965,5 +973,7 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");

Ditto.

Kind regards,

Paul