[PATCH v2 0/3] Bluetooth: power-on QCA6390 correctly

[PATCH v2 0/3] Bluetooth: power-on QCA6390 correctly

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Patch 1 is just a typo fix as we're already touching this bindings. The
second patch adds more regulator defintions and enforces them for the
QCA6390 model. The final patch enables the power sequence for the BT
module of QCA6390 in the hci_qca driver.

v1 -> v2:
- squashed the two bluetooth patches into one
- changed the naming convention for the RFA regulators to follow the
  existing ones
- added dt-bindings patches

Bartosz Golaszewski (3):
  dt-bindings: net: bluetooth: qualcomm: fix a typo
  dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390
  Bluetooth: qca: run the power-on/off sequence for QCA6390 too

 .../net/bluetooth/qualcomm-bluetooth.yaml     | 26 ++++++++++++++++++-
 drivers/bluetooth/hci_qca.c                   | 14 +++++++++-
 2 files changed, 38 insertions(+), 2 deletions(-)

-- 
2.40.1

[PATCH v2 1/3] dt-bindings: net: bluetooth: qualcomm: fix a typo

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Spell supply correctly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml   | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index eba2f3026ab0..ba8205f88e5f 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -69,7 +69,7 @@ properties:
     description: VDD_RFA_CMN supply regulator handle
 
   vddrfa0p8-supply:
-    description: VDD_RFA_0P8 suppply regulator handle
+    description: VDD_RFA_0P8 supply regulator handle
 
   vddrfa1p7-supply:
     description: VDD_RFA_1P7 supply regulator handle
-- 
2.40.1

[PATCH v2 2/3] dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add regulator properties for QCA6390 that are missing from the bindings
and enforce required properties for this model as well.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../net/bluetooth/qualcomm-bluetooth.yaml     | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index ba8205f88e5f..861663f280eb 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -65,12 +65,21 @@ properties:
   vddbtcxmx-supply:
     description: VDD_BT_CXMX supply regulator handle
 
+  vddpmu-supply:
+    description: VDD_PMU supply regulator handle
+
   vddrfacmn-supply:
     description: VDD_RFA_CMN supply regulator handle
 
   vddrfa0p8-supply:
     description: VDD_RFA_0P8 supply regulator handle
 
+  vddrfa0p9-supply:
+    description: VDD_RFA_0P9 supply regulator handle
+
+  vddrfa1p3-supply:
+    description: VDD_RFA1P3 supply regulator handle
+
   vddrfa1p7-supply:
     description: VDD_RFA_1P7 supply regulator handle
 
@@ -180,6 +189,21 @@ allOf:
         - vddrfa0p8-supply
         - vddrfa1p2-supply
         - vddrfa1p9-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6390-bt
+    then:
+      required:
+        - enable-gpios
+        - vddio-supply
+        - vddpmu-supply
+        - vddaon-supply
+        - vddrfa0p9-supply
+        - vddrfa1p3-supply
+        - vddrfa1p9-supply
 
 examples:
   - |
-- 
2.40.1

[PATCH v2 3/3] Bluetooth: qca: run the power-on/off sequence for QCA6390 too

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The Bluetooth module on QCA6390 needs to be powered-on by enabling the
relevant regulators and driving the enable GPIO high. We can reuse the
power sequence for the WNC models if we add the list of required
regulators to the OF match data.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/bluetooth/hci_qca.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 35f74f209d1f..b27be08a1f6f 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1788,6 +1788,7 @@ static int qca_power_on(struct hci_dev *hdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		ret = qca_regulator_init(hu);
 		break;
 
@@ -2044,7 +2045,15 @@ static const struct qca_device_data qca_soc_data_qca2066 __maybe_unused = {
 
 static const struct qca_device_data qca_soc_data_qca6390 __maybe_unused = {
 	.soc_type = QCA_QCA6390,
-	.num_vregs = 0,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 20000 },
+		{ "vddaon", 100000 },
+		{ "vddpmu", 1250000 },
+		{ "vddrfa0p9", 200000 },
+		{ "vddrfa1p3", 400000 },
+		{ "vddrfa1p9", 400000 },
+	},
+	.num_vregs = 6,
 };
 
 static const struct qca_device_data qca_soc_data_wcn6750 __maybe_unused = {
@@ -2129,6 +2138,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
 
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_QCA6390:
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 		msleep(100);
 		qca_regulator_disable(qcadev);
@@ -2276,6 +2286,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -2386,6 +2397,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		if (power->vregs_on) {
 			qca_power_shutdown(&qcadev->serdev_hu);
 			break;
-- 
2.40.1

RE: Bluetooth: power-on QCA6390 correctly

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1650 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=807781

---Test result---

Test Summary:
CheckPatch                    PASS      1.39 seconds
GitLint                       PASS      0.70 seconds
SubjectPrefix                 FAIL      0.53 seconds
BuildKernel                   PASS      27.14 seconds
CheckAllWarning               PASS      30.14 seconds
CheckSparse                   PASS      38.64 seconds
CheckSmatch                   PASS      97.95 seconds
BuildKernel32                 PASS      26.25 seconds
TestRunnerSetup               PASS      414.38 seconds
TestRunner_l2cap-tester       PASS      23.75 seconds
TestRunner_iso-tester         PASS      52.14 seconds
TestRunner_bnep-tester        PASS      7.04 seconds
TestRunner_mgmt-tester        PASS      159.16 seconds
TestRunner_rfcomm-tester      PASS      11.00 seconds
TestRunner_sco-tester         PASS      14.60 seconds
TestRunner_ioctl-tester       PASS      12.05 seconds
TestRunner_mesh-tester        PASS      8.82 seconds
TestRunner_smp-tester         PASS      9.85 seconds
TestRunner_userchan-tester    PASS      7.60 seconds
IncrementalBuild              PASS      34.10 seconds

Details
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
"Bluetooth: " prefix is not specified in the subject


---
Regards,
Linux Bluetooth

Re: [PATCH v2 2/3] dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390

[Krzysztof Kozlowski]

On 07/12/2023 10:12, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Add regulator properties for QCA6390 that are missing from the bindings
> and enforce required properties for this model as well.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time, thus I will skip this patch entirely till you follow
the process allowing the patch to be tested.

Please kindly resend and include all necessary To/Cc entries.

Best regards,
Krzysztof

Re: [PATCH v2 2/3] dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390

[Bartosz Golaszewski]

On Thu, Dec 7, 2023 at 2:26 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 07/12/2023 10:12, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Add regulator properties for QCA6390 that are missing from the bindings
> > and enforce required properties for this model as well.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Please use scripts/get_maintainers.pl to get a list of necessary people
> and lists to CC. It might happen, that command when run on an older
> kernel, gives you outdated entries. Therefore please be sure you base
> your patches on recent Linux kernel.
>
> You missed at least devicetree list (maybe more), so this won't be
> tested by automated tooling. Performing review on untested code might be
> a waste of time, thus I will skip this patch entirely till you follow
> the process allowing the patch to be tested.
>
> Please kindly resend and include all necessary To/Cc entries.
>
> Best regards,
> Krzysztof
>

Sorry, I just used the command I used last but this time there were
additional dt-bindings patches. Will resend it tomorrow.

Bart

RE: Bluetooth: power-on QCA6390 correctly

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2565 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=808173

---Test result---

Test Summary:
CheckPatch                    PASS      1.97 seconds
GitLint                       FAIL      1.45 seconds
SubjectPrefix                 FAIL      0.69 seconds
BuildKernel                   PASS      28.63 seconds
CheckAllWarning               PASS      31.34 seconds
CheckSparse                   PASS      37.30 seconds
CheckSmatch                   PASS      101.04 seconds
BuildKernel32                 PASS      27.67 seconds
TestRunnerSetup               PASS      430.36 seconds
TestRunner_l2cap-tester       PASS      23.40 seconds
TestRunner_iso-tester         PASS      50.16 seconds
TestRunner_bnep-tester        PASS      7.24 seconds
TestRunner_mgmt-tester        FAIL      166.09 seconds
TestRunner_rfcomm-tester      PASS      11.38 seconds
TestRunner_sco-tester         PASS      14.92 seconds
TestRunner_ioctl-tester       PASS      12.37 seconds
TestRunner_mesh-tester        PASS      9.17 seconds
TestRunner_smp-tester         PASS      10.05 seconds
TestRunner_userchan-tester    PASS      7.77 seconds
IncrementalBuild              PASS      35.78 seconds

Details
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[RESEND,v2,2/3] dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390

WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
1: T1 Title exceeds max length (81>80): "[RESEND,v2,2/3] dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390"
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
"Bluetooth: " prefix is not specified in the subject
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 497, Passed: 496 (99.8%), Failed: 1, Not Run: 0

Failed Test Cases
LL Privacy - Start Discovery 2 (Disable RL)          Failed       0.301 seconds


---
Regards,
Linux Bluetooth