[PATCH v2 1/2] Bluetooth: hci_sync: Use address filtering when HCI_PA_SYNC is set

[PATCH v2 1/2] Bluetooth: hci_sync: Use address filtering when HCI_PA_SYNC is set

[Luiz Augusto von Dentz]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If HCI_PA_SYNC flag is set it means there is a Periodic Advertising
Synchronization pending, so this attempts to locate the address passed
to HCI_OP_LE_PA_CREATE_SYNC and program it in the accept list so only
reports with that address are processed.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/hci_sync.c | 45 +++++++++++++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 10 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 669099cf9b1a..ab609089ac4c 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -2566,6 +2566,16 @@ static struct conn_params *conn_params_copy(struct list_head *list, size_t *n)
 	return p;
 }
 
+/* Clear LE Accept List */
+static int hci_le_clear_accept_list_sync(struct hci_dev *hdev)
+{
+	if (!(hdev->commands[26] & 0x80))
+		return 0;
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_CLEAR_ACCEPT_LIST, 0, NULL,
+				     HCI_CMD_TIMEOUT);
+}
+
 /* Device must not be scanning when updating the accept list.
  *
  * Update is done using the following sequence:
@@ -2614,6 +2624,31 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 		goto done;
 	}
 
+	/* Force address filtering if PA Sync is in progress */
+	if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) {
+		struct hci_cp_le_pa_create_sync *sent;
+
+		sent = hci_sent_cmd_data(hdev, HCI_OP_LE_PA_CREATE_SYNC);
+		if (sent) {
+			struct conn_params pa;
+
+			memset(&pa, 0, sizeof(pa));
+
+			bacpy(&pa.addr, &sent->addr);
+			pa.addr_type = sent->addr_type;
+
+			/* Clear first since there could be addresses left
+			 * behind.
+			 */
+			hci_le_clear_accept_list_sync(hdev);
+
+			num_entries = 1;
+			err = hci_le_add_accept_list_sync(hdev, &pa,
+							  &num_entries);
+			goto done;
+		}
+	}
+
 	/* Go through the current accept list programmed into the
 	 * controller one by one and check if that address is connected or is
 	 * still in the list of pending connections or list of devices to
@@ -4220,16 +4255,6 @@ static int hci_le_read_accept_list_size_sync(struct hci_dev *hdev)
 				     0, NULL, HCI_CMD_TIMEOUT);
 }
 
-/* Clear LE Accept List */
-static int hci_le_clear_accept_list_sync(struct hci_dev *hdev)
-{
-	if (!(hdev->commands[26] & 0x80))
-		return 0;
-
-	return __hci_cmd_sync_status(hdev, HCI_OP_LE_CLEAR_ACCEPT_LIST, 0, NULL,
-				     HCI_CMD_TIMEOUT);
-}
-
 /* Read LE Resolving List Size */
 static int hci_le_read_resolv_list_size_sync(struct hci_dev *hdev)
 {
-- 
2.43.0

[PATCH v2 2/2] Bluetooth: hci_sync: Don't scan on Coded PHY when HCI_PA_SYNC is set

[Luiz Augusto von Dentz]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This disables Coded PHY when HCI_PA_SYNC is enabled.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/hci_sync.c | 65 +++++++++++++++++++++++++++++++++-------
 1 file changed, 54 insertions(+), 11 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index ab609089ac4c..2bd9b6b050e0 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -2758,6 +2758,14 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 	return filter_policy;
 }
 
+static void hci_le_scan_phy_params(struct hci_cp_le_scan_phy_params *cp,
+				   u8 type, u16 interval, u16 window)
+{
+	cp->type = type;
+	cp->interval = cpu_to_le16(interval);
+	cp->window = cpu_to_le16(window);
+}
+
 static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type,
 					  u16 interval, u16 window,
 					  u8 own_addr_type, u8 filter_policy)
@@ -2765,7 +2773,7 @@ static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type,
 	struct hci_cp_le_set_ext_scan_params *cp;
 	struct hci_cp_le_scan_phy_params *phy;
 	u8 data[sizeof(*cp) + sizeof(*phy) * 2];
-	u8 num_phy = 0;
+	u8 num_phy = 0x00;
 
 	cp = (void *)data;
 	phy = (void *)cp->data;
@@ -2775,28 +2783,63 @@ static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type,
 	cp->own_addr_type = own_addr_type;
 	cp->filter_policy = filter_policy;
 
+	/* Check if PA Sync is in progress then select the PHY based on the
+	 * hci_conn.iso_qos.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) {
+		struct hci_cp_le_add_to_accept_list *sent;
+
+		sent = hci_sent_cmd_data(hdev, HCI_OP_LE_ADD_TO_ACCEPT_LIST);
+		if (sent) {
+			struct hci_conn *conn;
+
+			conn = hci_conn_hash_lookup_ba(hdev, ISO_LINK,
+						       &sent->bdaddr);
+			if (conn) {
+				struct bt_iso_qos *qos = &conn->iso_qos;
+
+				if (qos->bcast.in.phy & BT_ISO_PHY_1M ||
+				    qos->bcast.in.phy & BT_ISO_PHY_2M) {
+					cp->scanning_phys |= LE_SCAN_PHY_1M;
+					hci_le_scan_phy_params(phy, type,
+							       interval,
+							       window);
+					num_phy++;
+					phy++;
+				}
+
+				if (qos->bcast.in.phy & BT_ISO_PHY_CODED) {
+					cp->scanning_phys |= LE_SCAN_PHY_CODED;
+					hci_le_scan_phy_params(phy, type,
+							       interval,
+							       window);
+					num_phy++;
+					phy++;
+				}
+
+				goto done;
+			}
+		}
+	}
+
 	if (scan_1m(hdev) || scan_2m(hdev)) {
 		cp->scanning_phys |= LE_SCAN_PHY_1M;
-
-		phy->type = type;
-		phy->interval = cpu_to_le16(interval);
-		phy->window = cpu_to_le16(window);
-
+		hci_le_scan_phy_params(phy, type, interval, window);
 		num_phy++;
 		phy++;
 	}
 
 	if (scan_coded(hdev)) {
 		cp->scanning_phys |= LE_SCAN_PHY_CODED;
-
-		phy->type = type;
-		phy->interval = cpu_to_le16(interval);
-		phy->window = cpu_to_le16(window);
-
+		hci_le_scan_phy_params(phy, type, interval, window);
 		num_phy++;
 		phy++;
 	}
 
+done:
+	if (!num_phy)
+		return -EINVAL;
+
 	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_SCAN_PARAMS,
 				     sizeof(*cp) + sizeof(*phy) * num_phy,
 				     data, HCI_CMD_TIMEOUT);
-- 
2.43.0

RE: [v2,1/2] Bluetooth: hci_sync: Use address filtering when HCI_PA_SYNC is set

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1962 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=830022

---Test result---

Test Summary:
CheckPatch                    PASS      1.34 seconds
GitLint                       PASS      0.61 seconds
SubjectPrefix                 PASS      0.23 seconds
BuildKernel                   PASS      27.68 seconds
CheckAllWarning               PASS      30.38 seconds
CheckSparse                   PASS      35.78 seconds
CheckSmatch                   PASS      98.42 seconds
BuildKernel32                 PASS      26.86 seconds
TestRunnerSetup               PASS      496.81 seconds
TestRunner_l2cap-tester       FAIL      24.36 seconds
TestRunner_iso-tester         FAIL      44.93 seconds
TestRunner_bnep-tester        PASS      4.81 seconds
TestRunner_mgmt-tester        PASS      116.50 seconds
TestRunner_rfcomm-tester      PASS      7.38 seconds
TestRunner_sco-tester         PASS      15.01 seconds
TestRunner_ioctl-tester       PASS      7.93 seconds
TestRunner_mesh-tester        PASS      5.93 seconds
TestRunner_smp-tester         PASS      6.90 seconds
TestRunner_userchan-tester    PASS      5.00 seconds
IncrementalBuild              PASS      31.07 seconds

Details
##############################
Test: TestRunner_l2cap-tester - FAIL
Desc: Run l2cap-tester with test-runner
Output:
Total: 51, Passed: 50 (98.0%), Failed: 1, Not Run: 0

Failed Test Cases
L2CAP LE Client - Close socket 2                     Timed out    2.155 seconds
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 117, Passed: 116 (99.1%), Failed: 1, Not Run: 0

Failed Test Cases
ISO Connect Suspend - Success                        Timed out   10.248 seconds


---
Regards,
Linux Bluetooth