* [PATCH] Bluetooth: btrtl: Add the support for RTL8922A
@ 2024-03-12 6:54 max.chou
2024-03-12 7:32 ` bluez.test.bot
0 siblings, 1 reply; 2+ messages in thread
From: max.chou @ 2024-03-12 6:54 UTC (permalink / raw)
To: marcel
Cc: johan.hedberg, luiz.dentz, linux-bluetooth, linux-kernel, alex_lu,
hildawu, karenhsu, kidman, max.chou
From: Max Chou <max.chou@realtek.com>
Add the support for RTL8922A BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=8922 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00E04C885A01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btrtl.c | 16 ++++++++++++++++
drivers/bluetooth/btusb.c | 11 +++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index cc50de69e8dc..51a2d459cf6d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -30,6 +30,7 @@
#define RTL_ROM_LMP_8822B 0x8822
#define RTL_ROM_LMP_8852A 0x8852
#define RTL_ROM_LMP_8851B 0x8851
+#define RTL_ROM_LMP_8922A 0x8922
#define RTL_CONFIG_MAGIC 0x8723ab55
#define RTL_VSC_OP_COREDUMP 0xfcff
@@ -69,6 +70,7 @@ enum btrtl_chip_id {
CHIP_ID_8852B = 20,
CHIP_ID_8852C = 25,
CHIP_ID_8851B = 36,
+ CHIP_ID_8922A = 44,
CHIP_ID_8852BT = 47,
};
@@ -309,6 +311,15 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8851bu_config",
.hw_info = "rtl8851bu" },
+ /* 8922A */
+ { IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8922au_fw",
+ .cfg_name = "rtl_bt/rtl8922au_config",
+ .hw_info = "rtl8922au" },
+
/* 8852BT/8852BE-VT */
{ IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB),
.config_needed = false,
@@ -655,6 +666,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
{ RTL_ROM_LMP_8852A, 20 }, /* 8852B */
{ RTL_ROM_LMP_8852A, 25 }, /* 8852C */
{ RTL_ROM_LMP_8851B, 36 }, /* 8851B */
+ { RTL_ROM_LMP_8922A, 44 }, /* 8922A */
{ RTL_ROM_LMP_8852A, 47 }, /* 8852BT */
};
@@ -1255,6 +1267,7 @@ int btrtl_download_firmware(struct hci_dev *hdev,
case RTL_ROM_LMP_8852A:
case RTL_ROM_LMP_8703B:
case RTL_ROM_LMP_8851B:
+ case RTL_ROM_LMP_8922A:
err = btrtl_setup_rtl8723b(hdev, btrtl_dev);
break;
default:
@@ -1286,6 +1299,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
case CHIP_ID_8852B:
case CHIP_ID_8852C:
case CHIP_ID_8851B:
+ case CHIP_ID_8922A:
case CHIP_ID_8852BT:
set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
@@ -1522,3 +1536,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 06e915b57283..d4aa9a84979b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -556,6 +556,17 @@ static const struct usb_device_id quirks_table[] = {
/* Realtek 8852BT/8852BE-VT Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+
+ /* Realtek 8922AE Bluetooth devices */
+ { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_REALTEK },
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* RE: Bluetooth: btrtl: Add the support for RTL8922A
2024-03-12 6:54 [PATCH] Bluetooth: btrtl: Add the support for RTL8922A max.chou
@ 2024-03-12 7:32 ` bluez.test.bot
0 siblings, 0 replies; 2+ messages in thread
From: bluez.test.bot @ 2024-03-12 7:32 UTC (permalink / raw)
To: linux-bluetooth, max.chou
[-- Attachment #1: Type: text/plain, Size: 2043 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=834535
---Test result---
Test Summary:
CheckPatch PASS 0.87 seconds
GitLint PASS 0.32 seconds
SubjectPrefix PASS 0.14 seconds
BuildKernel PASS 29.60 seconds
CheckAllWarning PASS 32.26 seconds
CheckSparse PASS 38.07 seconds
CheckSmatch PASS 102.82 seconds
BuildKernel32 PASS 28.33 seconds
TestRunnerSetup PASS 532.35 seconds
TestRunner_l2cap-tester PASS 20.38 seconds
TestRunner_iso-tester FAIL 33.38 seconds
TestRunner_bnep-tester PASS 5.00 seconds
TestRunner_mgmt-tester FAIL 116.66 seconds
TestRunner_rfcomm-tester PASS 7.54 seconds
TestRunner_sco-tester PASS 15.06 seconds
TestRunner_ioctl-tester PASS 8.01 seconds
TestRunner_mesh-tester PASS 6.03 seconds
TestRunner_smp-tester PASS 7.03 seconds
TestRunner_userchan-tester PASS 5.16 seconds
IncrementalBuild PASS 27.30 seconds
Details
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 117, Passed: 116 (99.1%), Failed: 1, Not Run: 0
Failed Test Cases
ISO Connect Suspend - Success Failed 4.188 seconds
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 488 (99.2%), Failed: 2, Not Run: 2
Failed Test Cases
LL Privacy - Add Device 7 (AL is full) Failed 0.199 seconds
LL Privacy - Remove Device 4 (Disable Adv) Timed out 2.138 seconds
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-03-12 7:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-12 6:54 [PATCH] Bluetooth: btrtl: Add the support for RTL8922A max.chou
2024-03-12 7:32 ` bluez.test.bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).