From: Mike Zhou <netdream1981@gmail.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Bluetooth-alsa no sound
Date: Thu, 14 Apr 2005 14:02:16 +0100 [thread overview]
Message-ID: <66d811d805041406024fffcfe8@mail.gmail.com> (raw)
In-Reply-To: <425E18B1.106@xmission.com>
Dear Brad:
Thanks for your help. I think the bluetooth-alsa may be work
correctly. But when I use strace aplay --verbose -D hw:1,0 test2.wav,
I got this error at the end:
ioctl(4, 0x400c4150, 0xbffff910) =3D -1 EIO (Input/output error)
write(2, "aplay: pcm_write:1146: ", 23aplay: pcm_write:1146: ) =3D 23
write(2, "write error: Input/output error", 31write error:
Input/output error) =3D 31
write(2, "\n", 1
) =3D 1
exit_group(1) =3D ?
Do you think I should reinstall the bluetooth-alsa with CVS version?
Thanks a lot!
Regards!
Mike
On 4/14/05, Brad Midgley <bmidgley@xmission.com> wrote:
> Mike,
>=20
> bluetooth-alsa is a pretty fast-moving target. If it's not working, you
> should get the latest from cvs and build it from scratch (see the
> instructions at bluetooth-alsa.sf.net)
>=20
> Brad
>=20
> Mike Zhou wrote:
> > Hi,
> >
> > I am new guy of Linux. Now, I am dealing with Bluetooth-alsa. But
> > after I installed all packet, there is no sound.
> >
> > I used 2.6.11 kernel with patch-2.6.11-mh2.gz. I also installed the
> > newest BLueZ. I installed the .deb pakage from
> > http://cgi.sfu.ca/~jdbates/moin/moin.cgi/Bluetooth%26ALSA?action=3Ddiff
> >
> > It seems the snd-bt-sco should be worked. After btsco command, I got:
> > lab509-8:/home/z0410016# btsco 00:03:89:00:45:ec
> > Device is 1:0
> > Voice setting: 0x0060
> > RFCOMM channel 1 connected
> > speaker volume: 11 mic volume: 0
> >
> > But I can't get any thing after I enter: aplay --verbose -D
> > plughw:Headset test2.wav.
> > And the software will not stop unless I kill it.
> >
> > The result of --verbose is:
> > lab509-8:/home/z0410016# aplay --verbose -D plughw:Headset test2.wav
> > Playing WAVE 'test2.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, =
Mono
> > Plug PCM: Rate conversion PCM (8000, sformat=3DS16_LE)
> > Its setup is:
> > stream : PLAYBACK
> > access : RW_INTERLEAVED
> > format : S16_LE
> > subformat : STD
> > channels : 1
> > rate : 22050
> > exact rate : 22050 (22050/1)
> > msbits : 16
> > buffer_size : 11025
> > period_size : 2756
> > period_time : 125000
> > tick_time : 1000
> > tstamp_mode : NONE
> > period_step : 1
> > sleep_min : 0
> > avail_min : 2756
> > xfer_align : 2756
> > start_threshold : 11024
> > stop_threshold : 11025
> > silence_threshold: 0
> > silence_size : 0
> > boundary : 1445068800
> > Slave: Hardware PCM card 1 'BT Headset' device 0 subdevice 0
> >
> > Its setup is:
> > stream : PLAYBACK
> > access : MMAP_INTERLEAVED
> > format : S16_LE
> > subformat : STD
> > channels : 1
> > rate : 8000
> > exact rate : 8000 (8000/1)
> > msbits : 16
> > buffer_size : 4000
> > period_size : 1000
> > period_time : 125000
> > tick_time : 1000
> > tstamp_mode : NONE
> > period_step : 1
> > sleep_min : 0
> > avail_min : 1000
> > xfer_align : 1000
> > start_threshold : 4000
> > stop_threshold : 4000
> > silence_threshold: 0
> > silence_size : 0
> > boundary : 2097152000
> >
> > It is the same when I try to use arecord. How can I fix it?
> >
> > Regards!
> >
> > Mike
> >
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users=
.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_ide95&alloc_id=14396&op=3Dclick
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-04-14 13:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-13 19:52 [Bluez-users] Bluetooth-alsa no sound Mike Zhou
2005-04-14 7:16 ` Brad Midgley
2005-04-14 13:02 ` Mike Zhou [this message]
2005-04-14 13:46 ` Mike Zhou
2005-04-14 14:14 ` Brad Midgley
2005-04-14 16:17 ` Mike Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=66d811d805041406024fffcfe8@mail.gmail.com \
--to=netdream1981@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox