* [RFC PATCH 0/1] Bluetooth: btmtk: add USB autopm support to btmtk_usb_setup()
@ 2026-03-24 10:34 Alberto Garcia
2026-03-24 10:34 ` [RFC PATCH 1/1] " Alberto Garcia
0 siblings, 1 reply; 3+ messages in thread
From: Alberto Garcia @ 2026-03-24 10:34 UTC (permalink / raw)
To: linux-bluetooth
Cc: Alberto Garcia, Marcel Holtmann, Luiz Augusto von Dentz,
Matthias Brugger, AngeloGioacchino Del Regno
Hello,
I've been having problems with the btmtk bluetooth driver for a long
time. What happens is a failure during initialization and the loading
of the firmware, with errors like these:
kernel: Bluetooth: hci0: Failed to get device id (-108)
kernel: Bluetooth: hci0: Failed to get fw version (-108)
The device is MediaTek MT7921 (0489:e0cd), there are more details in
this bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=217475
Passing btusb.enable_autosuspend=n seems to solve the problem for me.
My computer's hard drive is encrypted so it can take a long time
before the bluetooth firmware is loaded, so I interpret that this
causes the device to autosuspend during boot and that's why
initialization fails. Does that make sense?
I saw that commit 67dba2c28fe0 fixed similar errors during shutdown by
using usb_autopm_get_interface() so I tried the same approach for the
btusb_mtk_setup() function. I confirm that this solves the problem for
me and with this patch the bluetooth adapter works reliably.
I was also suggested to try the simpler approach of using setup_on_usb
instead:
if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) &&
(id->driver_info & BTUSB_MEDIATEK)) {
- hdev->setup = btusb_mtk_setup;
+ data->setup_on_usb = btusb_mtk_setup;
hdev->shutdown = btusb_mtk_shutdown;
hdev->manufacturer = 70;
However this does not solve the problem:
kernel: usbcore: registered new interface driver btusb
kernel: Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106151414
kernel: Bluetooth: hci0: Execution of wmt command timed out
kernel: Bluetooth: hci0: Failed to send wmt patch dwnld (-110)
kernel: Bluetooth: hci0: Failed to set up firmware (-110)
So I would like to know if a patch like the one I'm sending is a good
approach or if I should try something else.
Regards,
Berto
Alberto Garcia (1):
Bluetooth: btmtk: add USB autopm support to btmtk_usb_setup()
drivers/bluetooth/btmtk.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--
2.47.3
^ permalink raw reply [flat|nested] 3+ messages in thread
* [RFC PATCH 1/1] Bluetooth: btmtk: add USB autopm support to btmtk_usb_setup()
2026-03-24 10:34 [RFC PATCH 0/1] Bluetooth: btmtk: add USB autopm support to btmtk_usb_setup() Alberto Garcia
@ 2026-03-24 10:34 ` Alberto Garcia
2026-03-24 11:06 ` bluez.test.bot
0 siblings, 1 reply; 3+ messages in thread
From: Alberto Garcia @ 2026-03-24 10:34 UTC (permalink / raw)
To: linux-bluetooth
Cc: Alberto Garcia, Marcel Holtmann, Luiz Augusto von Dentz,
Matthias Brugger, AngeloGioacchino Del Regno
btmtk_usb_setup() accesses the device without first ensuring that it
is awake, so it may fail if the device has been autosuspended, e.g.:
Bluetooth: hci0: Failed to get device id (-108)
Bluetooth: hci0: Failed to get fw version (-108)
Add usb_autopm_get_interface()/usb_autopm_put_interface() around the
entire setup process, mirroring what commit 67dba2c28fe0 ("Bluetooth:
btmtk: Fix failed to send func ctrl for MediaTek devices.") already
did for btmtk_usb_shutdown().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217475
Signed-off-by: Alberto Garcia <berto@igalia.com>
---
drivers/bluetooth/btmtk.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index fa7533578f85..a5d15efa8712 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -1268,7 +1268,7 @@ int btmtk_usb_suspend(struct hci_dev *hdev)
}
EXPORT_SYMBOL_GPL(btmtk_usb_suspend);
-int btmtk_usb_setup(struct hci_dev *hdev)
+static int do_btmtk_usb_setup(struct hci_dev *hdev)
{
struct btmtk_data *btmtk_data = hci_get_priv(hdev);
struct btmtk_hci_wmt_params wmt_params;
@@ -1453,6 +1453,21 @@ int btmtk_usb_setup(struct hci_dev *hdev)
return 0;
}
+
+int btmtk_usb_setup(struct hci_dev *hdev)
+{
+ struct btmtk_data *btmtk_data = hci_get_priv(hdev);
+ int err;
+
+ err = usb_autopm_get_interface(btmtk_data->intf);
+ if (err < 0)
+ return err;
+
+ err = do_btmtk_usb_setup(hdev);
+
+ usb_autopm_put_interface(btmtk_data->intf);
+ return err;
+}
EXPORT_SYMBOL_GPL(btmtk_usb_setup);
int btmtk_usb_shutdown(struct hci_dev *hdev)
--
2.47.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* RE: Bluetooth: btmtk: add USB autopm support to btmtk_usb_setup()
2026-03-24 10:34 ` [RFC PATCH 1/1] " Alberto Garcia
@ 2026-03-24 11:06 ` bluez.test.bot
0 siblings, 0 replies; 3+ messages in thread
From: bluez.test.bot @ 2026-03-24 11:06 UTC (permalink / raw)
To: linux-bluetooth, berto
[-- Attachment #1: Type: text/plain, Size: 2833 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1071561
---Test result---
Test Summary:
CheckPatch PENDING 0.44 seconds
GitLint PENDING 0.25 seconds
SubjectPrefix PASS 0.11 seconds
BuildKernel PASS 26.35 seconds
CheckAllWarning PASS 28.76 seconds
CheckSparse PASS 27.75 seconds
BuildKernel32 PASS 25.28 seconds
TestRunnerSetup PASS 562.72 seconds
TestRunner_l2cap-tester PASS 27.55 seconds
TestRunner_iso-tester FAIL 38.48 seconds
TestRunner_bnep-tester PASS 6.23 seconds
TestRunner_mgmt-tester FAIL 114.01 seconds
TestRunner_rfcomm-tester PASS 9.83 seconds
TestRunner_sco-tester FAIL 14.12 seconds
TestRunner_ioctl-tester PASS 10.23 seconds
TestRunner_mesh-tester FAIL 11.48 seconds
TestRunner_smp-tester PASS 8.44 seconds
TestRunner_userchan-tester PASS 6.52 seconds
IncrementalBuild PENDING 0.83 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x7e/0x2b0
Total: 141, Passed: 141 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.103 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context at net/core/sock.c:3782
Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 1.908 seconds
Mesh - Send cancel - 2 Timed out 2.006 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-03-24 11:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-24 10:34 [RFC PATCH 0/1] Bluetooth: btmtk: add USB autopm support to btmtk_usb_setup() Alberto Garcia
2026-03-24 10:34 ` [RFC PATCH 1/1] " Alberto Garcia
2026-03-24 11:06 ` bluez.test.bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox