RE: Bluetooth: Add MediaTek MT7927 (MT6639) support

RE: Bluetooth: Add MediaTek MT7927 (MT6639) support

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 4541 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1062069

---Test result---

Test Summary:
CheckPatch                    PENDING   0.49 seconds
GitLint                       PENDING   0.46 seconds
SubjectPrefix                 PASS      0.15 seconds
BuildKernel                   PASS      26.02 seconds
CheckAllWarning               PASS      28.87 seconds
CheckSparse                   WARNING   32.14 seconds
BuildKernel32                 PASS      25.35 seconds
TestRunnerSetup               PASS      567.94 seconds
TestRunner_l2cap-tester       PASS      29.42 seconds
TestRunner_iso-tester         FAIL      48.73 seconds
TestRunner_bnep-tester        PASS      6.44 seconds
TestRunner_mgmt-tester        FAIL      129.49 seconds
TestRunner_rfcomm-tester      PASS      9.54 seconds
TestRunner_sco-tester         FAIL      14.84 seconds
TestRunner_ioctl-tester       PASS      10.25 seconds
TestRunner_mesh-tester        FAIL      11.52 seconds
TestRunner_smp-tester         PASS      8.58 seconds
TestRunner_userchan-tester    PASS      6.87 seconds
IncrementalBuild              PENDING   0.53 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
drivers/bluetooth/btmtk.c:1536:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1537:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1538:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1539:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1540:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1540:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1541:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1542:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1543:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1544:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1545:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1546:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4681:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4682:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4684:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4685:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4687:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4688:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4690:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4691:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4693:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4694:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4695:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4696:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4696:1: error: bad constant expression
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x7e/0x2b0
Total: 141, Passed: 141 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.114 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context at net/core/sock.c:3782
Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    1.819 seconds
Mesh - Send cancel - 2                               Timed out    1.994 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth

[PATCH v2 0/8] Bluetooth: Add MediaTek MT7927 (MT6639) support

[Javier Tia]

This series adds Bluetooth support for the MediaTek MT7927 (Filogic 380)
combo WiFi 7 + BT 5.4 module. The BT subsystem uses hardware variant
0x6639 and connects via USB.

The MT7927 is shipping in motherboards and PCIe add-in cards from ASUS,
Gigabyte, Lenovo, MSI, and TP-Link since mid-2024. Without these patches,
users see "Unsupported hardware variant (00006639)" or the BT subsystem
hangs during firmware download.

Jean-Francois Marliere independently identified the same three root
causes and posted an analysis to the list in February [1], though the
patch diff was not included in that message. This series provides the
complete, split patches addressing the same issues.

The series consists of nine patches:

  [1/9] Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
  [2/9] Bluetooth: btmtk: fix ISO interface setup for single alt setting
  [3/9] Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
  [4/9] Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
  [5/9] Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
  [6/9] Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
  [7/9] Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
  [8/9] Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator

Three driver changes are needed for MT6639:

1. CHIPID workaround: On some boards the BT USB MMIO register reads
   0x0000 for dev_id, causing the driver to skip the 0x6639 init path.
   Force dev_id to 0x6639 when it reads zero, matching the equivalent
   WiFi-side workaround that forces chip=0x7927.

2. Firmware naming: MT6639 uses firmware version prefix "2_1" instead of
   "1_1" used by MT7925 and other variants. The firmware path is
   mediatek/mt6639/BT_RAM_CODE_MT6639_2_1_hdr.bin.

3. Section filtering: The firmware binary contains 9 sections, but only
   sections with (dlmodecrctype & 0xff) == 0x01 are Bluetooth-related.
   Sending WiFi/other sections causes an irreversible BT subsystem hang.
   The filter is gated on dev_id == 0x6639 to avoid affecting other chips.

Additionally, patch 2 fixes the ISO interface setup for devices that
expose only a single alternate setting (alt 0) on the ISO endpoint.
Without this fix, btmtk_usb_claim_iso_intf() fails with EINVAL,
causing ~20 second initialization delays.

Changes in v2:
- Split USB device IDs into per-device commits as requested (Luiz)
- Added 0489:e110 (MSI X870E Ace Max, new hardware report)
- Added ISO interface fix for single alt setting (13d3:3588 devices)
- Added Tested-by trailers for all USB IDs except 0489:e110
- Added USB descriptor output to all per-device commits
- Removed BTMTK_FIRMWARE_LOADED skip logic; firmware persistence is
  handled by the existing framework (Sean Wang)

The firmware blob (BT_RAM_CODE_MT6639_2_1_hdr.bin) is being submitted
separately to linux-firmware via GitLab MR. The firmware path and
filename have not been finalized yet; the driver currently requests
mediatek/mt6639/, but this may change based on the linux-firmware
review.

Tested hardware:
- ASUS ROG Crosshair X870E Hero (BT 0489:e13a)
- ASUS ROG STRIX X870-I (BT 0489:e13a)
- ASUS ROG STRIX X870E-E (BT 13d3:3588)
- ASUS ProArt X870E-Creator WiFi (BT 13d3:3588)
- Gigabyte Z790 AORUS MASTER X (BT 0489:e10f)
- Gigabyte Z790 AORUS ELITE X WiFi7 (BT 0489:e10f)
- MSI MEG X870E ACE MAX (BT 0489:e110)
- Lenovo Legion Pro 7 16ARX9 (BT 0489:e0fa)
- Lenovo Legion Pro 7 16AFR10H (BT 0489:e0fa)
- TP-Link Archer TBE550E PCIe (BT 0489:e116)

Tested on Arch Linux, CachyOS, Fedora (Bazzite), and Ubuntu
across kernels 6.13-6.19.

The companion WiFi support for MT7927 (mt76/mt7925e driver) has been
submitted separately to linux-wireless.

[1] https://lore.kernel.org/linux-bluetooth/496b0f8505eb6ffb19fdbee6f963c62aa6790fba.camel@marliere.fr/

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927

Assisted-by: Claude (Anthropic)
Signed-off-by: Javier Tia <floss@jetm.me>
---
Javier Tia (8):
      Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
      Bluetooth: btmtk: fix ISO interface setup for single alt setting
      Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
      Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
      Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
      Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
      Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
      Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator

 drivers/bluetooth/btmtk.c | 26 +++++++++++++++++++++++---
 drivers/bluetooth/btmtk.h |  1 +
 drivers/bluetooth/btusb.c | 12 ++++++++++++
 3 files changed, 36 insertions(+), 3 deletions(-)
---
base-commit: 50003ce2085a7f7dacf2426065d1a69c84b5b963
change-id: 20260305-mt7927-bt-support-6589a50c961f

Best regards,
--  
Javier Tia <floss@jetm.me>

[PATCH v2 1/8] Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support

[Javier Tia]

The MediaTek MT7927 (Filogic 380) combo WiFi 7 + BT 5.4 module uses
hardware variant 0x6639 for its Bluetooth subsystem. Without this patch,
the chip fails with "Unsupported hardware variant (00006639)" or hangs
during firmware download.

Three changes are needed to support MT6639:

1. CHIPID workaround: On some boards the BT USB MMIO register reads
   0x0000 for dev_id, causing the driver to skip the 0x6639 init path.
   Force dev_id to 0x6639 when it reads zero, matching the equivalent
   WiFi-side workaround that forces chip=0x7927.

2. Firmware naming: MT6639 uses firmware version prefix "2_1" instead of
   "1_1" used by MT7925 and other variants. The firmware path is
   mediatek/mt6639/BT_RAM_CODE_MT6639_2_1_hdr.bin.

3. Section filtering: The MT6639 firmware binary contains 9 sections, but
   only sections with (dlmodecrctype & 0xff) == 0x01 are Bluetooth-related.
   Sending the remaining WiFi/other sections causes an irreversible BT
   subsystem hang requiring a full power cycle. This matches the Windows
   driver behavior observed via USB captures.

Also add 0x6639 to the reset register (CONNV3) and firmware setup switch
cases alongside the existing 0x7925 handling.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Reported-by: Ryan Gilbert <xelnaga@gmail.com>
Signed-off-by: Javier Tia <floss@jetm.me>
---
 drivers/bluetooth/btmtk.c | 23 +++++++++++++++++++++--
 drivers/bluetooth/btmtk.h |  1 +
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 2507d587f28a..13c6e45deede 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -112,7 +112,11 @@ static void btmtk_coredump_notify(struct hci_dev *hdev, int state)
 void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver,
 			   u32 fw_flavor)
 {
-	if (dev_id == 0x7925)
+	if (dev_id == 0x6639)
+		snprintf(buf, size,
+			 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_2_%x_hdr.bin",
+			 dev_id & 0xffff, dev_id & 0xffff, (fw_ver & 0xff) + 1);
+	else if (dev_id == 0x7925)
 		snprintf(buf, size,
 			 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
 			 dev_id & 0xffff, dev_id & 0xffff, (fw_ver & 0xff) + 1);
@@ -130,6 +134,7 @@ EXPORT_SYMBOL_GPL(btmtk_fw_get_filename);
 int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 			      wmt_cmd_sync_func_t wmt_cmd_sync)
 {
+	struct btmtk_data *data = hci_get_priv(hdev);
 	struct btmtk_hci_wmt_params wmt_params;
 	struct btmtk_patch_header *hdr;
 	struct btmtk_global_desc *globaldesc = NULL;
@@ -166,6 +171,14 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 		section_offset = le32_to_cpu(sectionmap->secoffset);
 		dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
 
+		/* MT6639: only download sections where dlmode byte0 == 0x01,
+		 * matching the Windows driver behavior which skips WiFi/other
+		 * sections that would cause the chip to hang.
+		 */
+		if (data->dev_id == 0x6639 && dl_size > 0 &&
+		    (le32_to_cpu(sectionmap->bin_info_spec.dlmodecrctype) & 0xff) != 0x01)
+			continue;
+
 		if (dl_size > 0) {
 			retry = 20;
 			while (retry > 0) {
@@ -852,7 +865,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 		if (err < 0)
 			return err;
 		msleep(100);
-	} else if (dev_id == 0x7925) {
+	} else if (dev_id == 0x7925 || dev_id == 0x6639) {
 		err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val);
 		if (err < 0)
 			return err;
@@ -1322,6 +1335,11 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 		fw_flavor = (fw_flavor & 0x00000080) >> 7;
 	}
 
+	if (!dev_id) {
+		bt_dev_info(hdev, "MT6639: raw CHIPID=0x0000, forcing chip=0x6639");
+		dev_id = 0x6639;
+	}
+
 	btmtk_data->dev_id = dev_id;
 
 	err = btmtk_register_coredump(hdev, btmtk_data->drv_name, fw_version);
@@ -1339,6 +1357,7 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 	case 0x7925:
 	case 0x7961:
 	case 0x7902:
+	case 0x6639:
 		btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
 				      fw_version, fw_flavor);
 
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index adaf385626ee..6645bcadb523 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -8,6 +8,7 @@
 #define FIRMWARE_MT7902		"mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin"
 #define FIRMWARE_MT7961		"mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
 #define FIRMWARE_MT7925		"mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
+#define FIRMWARE_MT7927		"mediatek/mt6639/BT_RAM_CODE_MT6639_2_1_hdr.bin"
 
 #define HCI_EV_WMT 0xe4
 #define HCI_WMT_MAX_EVENT_SIZE		64

-- 
2.53.0

[PATCH v2 2/8] Bluetooth: btmtk: fix ISO interface setup for single alt setting

[Javier Tia]

Some MT6639 Bluetooth USB interfaces (e.g. IMC Networks 13d3:3588 on
ASUS ROG STRIX X870E-E and ProArt X870E-Creator boards) expose only a
single alternate setting (alt 0) on the ISO interface. The driver
unconditionally requests alt setting 1, which fails with EINVAL on
these devices, causing a ~20 second initialization delay and no LE
audio support.

Check the number of available alternate settings before selecting one.
If only alt 0 exists, use it; otherwise request alt 1 as before.

Link: https://github.com/jetm/mediatek-mt7927-dkms/pull/39
Signed-off-by: Javier Tia <floss@jetm.me>
Reported-by: Ryan Gilbert <xelnaga@gmail.com>
Tested-by: Ryan Gilbert <xelnaga@gmail.com>
---
 drivers/bluetooth/btmtk.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 13c6e45deede..06ba0dcd6527 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -1013,7 +1013,8 @@ static int __set_mtk_intr_interface(struct hci_dev *hdev)
 	if (!btmtk_data->isopkt_intf)
 		return -ENODEV;
 
-	err = usb_set_interface(btmtk_data->udev, MTK_ISO_IFNUM, 1);
+	err = usb_set_interface(btmtk_data->udev, MTK_ISO_IFNUM,
+			       (intf->num_altsetting > 1) ? 1 : 0);
 	if (err < 0) {
 		bt_dev_err(hdev, "setting interface failed (%d)", -err);
 		return err;

-- 
2.53.0

[PATCH v2 3/8] Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero

[Javier Tia]

Add USB device ID 0489:e13a (Foxconn/Hon Hai) for the MediaTek MT7927
(Filogic 380) Bluetooth interface found on the ASUS ROG Crosshair X870E
Hero WiFi motherboard.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e13a Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
...
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Signed-off-by: Javier Tia <floss@jetm.me>
Tested-by: Jose Tiburcio Ribeiro Netto <jnetto@mineiro.io>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a5e44887a5b5..58309af0f7a2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -751,6 +751,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe13a), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |

-- 
2.53.0

[PATCH v2 4/8] Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9

[Javier Tia]

Add USB device ID 0489:e0fa (Foxconn/Hon Hai) for the MediaTek MT7927
(Filogic 380) Bluetooth interface found on the Lenovo Legion Pro 7
16ARX9 laptop.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0fa Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
...
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Signed-off-by: Javier Tia <floss@jetm.me>
Tested-by: Llewellyn Curran <melinko2003@gmail.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 58309af0f7a2..2c9ca3d6016b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -753,6 +753,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe13a), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe0fa), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |

-- 
2.53.0

[PATCH v2 5/8] Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X

[Javier Tia]

Add USB device ID 0489:e10f (Foxconn/Hon Hai) for the MediaTek MT7927
(Filogic 380) Bluetooth interface found on the Gigabyte Z790 AORUS
MASTER X motherboard.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e10f Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
...
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Signed-off-by: Javier Tia <floss@jetm.me>
Tested-by: Chapuis Dario <chapuisdario4@gmail.com>
Tested-by: Evgeny Kapusta <3193631@gmail.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2c9ca3d6016b..d60798331bb3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -755,6 +755,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe0fa), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe10f), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |

-- 
2.53.0

[PATCH v2 6/8] Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max

[Javier Tia]

Add USB device ID 0489:e110 (Foxconn/Hon Hai) for the MediaTek MT7927
(Filogic 380) Bluetooth interface found on the MSI X870E Ace Max
motherboard.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e110 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
...
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Signed-off-by: Javier Tia <floss@jetm.me>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d60798331bb3..96882e9b831c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -757,6 +757,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe10f), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe110), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |

-- 
2.53.0

[PATCH v2 7/8] Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E

[Javier Tia]

Add USB device ID 0489:e116 (Foxconn/Hon Hai) for the MediaTek MT7927
(Filogic 380) Bluetooth interface found on the TP-Link Archer TBE550E
PCIe adapter.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e116 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
...
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Signed-off-by: Javier Tia <floss@jetm.me>
Tested-by: Thibaut FRANCOIS <tibo@humeurlibre.fr>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 96882e9b831c..55a000540439 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -759,6 +759,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe110), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe116), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |

-- 
2.53.0

[PATCH v2 8/8] Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator

[Javier Tia]

Add USB device ID 13d3:3588 (IMC Networks/Azurewave) for the MediaTek
MT7927 (Filogic 380) Bluetooth interface found on the ASUS ROG STRIX
X870E-E GAMING WIFI and ASUS ProArt X870E-Creator WiFi motherboards.

Note: boards with this USB ID report only one ISO alternate setting
(alt 0), causing a non-fatal "setting interface failed (22)" during
setup. Bluetooth still functions but initialization takes ~19 seconds
instead of ~2.6 seconds.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3588 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Signed-off-by: Javier Tia <floss@jetm.me>
Tested-by: Jose Tiburcio Ribeiro Netto <jnetto@mineiro.io>
Tested-by: Ivan Lubnin <lubnin.ivan@gmail.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 55a000540439..45ef0d008bce 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -761,6 +761,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe116), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3588), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |

-- 
2.53.0

RE: Bluetooth: Add MediaTek MT7927 (MT6639) support

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2833 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1072604

---Test result---

Test Summary:
CheckPatch                    PENDING   0.37 seconds
GitLint                       PENDING   0.24 seconds
SubjectPrefix                 PASS      0.94 seconds
BuildKernel                   PASS      26.23 seconds
CheckAllWarning               PASS      28.82 seconds
CheckSparse                   PASS      28.82 seconds
BuildKernel32                 PASS      25.62 seconds
TestRunnerSetup               PASS      566.89 seconds
TestRunner_l2cap-tester       PASS      27.97 seconds
TestRunner_iso-tester         FAIL      31.99 seconds
TestRunner_bnep-tester        PASS      6.26 seconds
TestRunner_mgmt-tester        FAIL      117.55 seconds
TestRunner_rfcomm-tester      PASS      9.47 seconds
TestRunner_sco-tester         FAIL      14.20 seconds
TestRunner_ioctl-tester       PASS      10.32 seconds
TestRunner_mesh-tester        FAIL      11.41 seconds
TestRunner_smp-tester         PASS      8.53 seconds
TestRunner_userchan-tester    PASS      6.65 seconds
IncrementalBuild              PENDING   0.52 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x7e/0x2b0
Total: 141, Passed: 141 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.108 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context at net/core/sock.c:3782
Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    1.858 seconds
Mesh - Send cancel - 2                               Timed out    1.995 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth

Re: [PATCH v2 1/8] Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support

[Sean Wang]

Hi, Javier

This is already a clear improvement over the previous version, but I
think there are still a few areas that could be refined further.

On Wed, Mar 25, 2026 at 6:33 PM Javier Tia <floss@jetm.me> wrote:
>
> The MediaTek MT7927 (Filogic 380) combo WiFi 7 + BT 5.4 module uses
> hardware variant 0x6639 for its Bluetooth subsystem. Without this patch,
> the chip fails with "Unsupported hardware variant (00006639)" or hangs
> during firmware download.
>
> Three changes are needed to support MT6639:
>
> 1. CHIPID workaround: On some boards the BT USB MMIO register reads
>    0x0000 for dev_id, causing the driver to skip the 0x6639 init path.
>    Force dev_id to 0x6639 when it reads zero, matching the equivalent
>    WiFi-side workaround that forces chip=0x7927.
>
> 2. Firmware naming: MT6639 uses firmware version prefix "2_1" instead of
>    "1_1" used by MT7925 and other variants. The firmware path is
>    mediatek/mt6639/BT_RAM_CODE_MT6639_2_1_hdr.bin.
>
> 3. Section filtering: The MT6639 firmware binary contains 9 sections, but
>    only sections with (dlmodecrctype & 0xff) == 0x01 are Bluetooth-related.
>    Sending the remaining WiFi/other sections causes an irreversible BT
>    subsystem hang requiring a full power cycle. This matches the Windows
>    driver behavior observed via USB captures.
>
> Also add 0x6639 to the reset register (CONNV3) and firmware setup switch
> cases alongside the existing 0x7925 handling.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
> Link: https://github.com/openwrt/mt76/issues/927
> Reported-by: Ryan Gilbert <xelnaga@gmail.com>
> Signed-off-by: Javier Tia <floss@jetm.me>
> ---
>  drivers/bluetooth/btmtk.c | 23 +++++++++++++++++++++--
>  drivers/bluetooth/btmtk.h |  1 +
>  2 files changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> index 2507d587f28a..13c6e45deede 100644
> --- a/drivers/bluetooth/btmtk.c
> +++ b/drivers/bluetooth/btmtk.c
> @@ -112,7 +112,11 @@ static void btmtk_coredump_notify(struct hci_dev *hdev, int state)
>  void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver,
>                            u32 fw_flavor)
>  {
> -       if (dev_id == 0x7925)
> +       if (dev_id == 0x6639)
> +               snprintf(buf, size,
> +                        "mediatek/mt%04x/BT_RAM_CODE_MT%04x_2_%x_hdr.bin",
> +                        dev_id & 0xffff, dev_id & 0xffff, (fw_ver & 0xff) + 1);
> +       else if (dev_id == 0x7925)
>                 snprintf(buf, size,
>                          "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
>                          dev_id & 0xffff, dev_id & 0xffff, (fw_ver & 0xff) + 1);
> @@ -130,6 +134,7 @@ EXPORT_SYMBOL_GPL(btmtk_fw_get_filename);
>  int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
>                               wmt_cmd_sync_func_t wmt_cmd_sync)
>  {
> +       struct btmtk_data *data = hci_get_priv(hdev);
>         struct btmtk_hci_wmt_params wmt_params;
>         struct btmtk_patch_header *hdr;
>         struct btmtk_global_desc *globaldesc = NULL;
> @@ -166,6 +171,14 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
>                 section_offset = le32_to_cpu(sectionmap->secoffset);
>                 dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
>
> +               /* MT6639: only download sections where dlmode byte0 == 0x01,
> +                * matching the Windows driver behavior which skips WiFi/other
> +                * sections that would cause the chip to hang.
> +                */
> +               if (data->dev_id == 0x6639 && dl_size > 0 &&
> +                   (le32_to_cpu(sectionmap->bin_info_spec.dlmodecrctype) & 0xff) != 0x01)
> +                       continue;
> +
>                 if (dl_size > 0) {
>                         retry = 20;
>                         while (retry > 0) {
> @@ -852,7 +865,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id)
>                 if (err < 0)
>                         return err;
>                 msleep(100);
> -       } else if (dev_id == 0x7925) {
> +       } else if (dev_id == 0x7925 || dev_id == 0x6639) {
>                 err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val);
>                 if (err < 0)
>                         return err;
> @@ -1322,6 +1335,11 @@ int btmtk_usb_setup(struct hci_dev *hdev)
>                 fw_flavor = (fw_flavor & 0x00000080) >> 7;
>         }
>
> +       if (!dev_id) {
> +               bt_dev_info(hdev, "MT6639: raw CHIPID=0x0000, forcing chip=0x6639");
> +               dev_id = 0x6639;
> +       }

Using raw CHIPID=0x0000 to unconditionally force 0x6639 seems fragile.
If another device later hits the same missing-ID condition, it would
also be misdetected as MT6639. Normally this kind of quirk could be
carried in .driver_data, but since btusb.c is shared, I'm not sure
that is the right fit here either. This should probably be handled
through a more device-specific fallback instead of mapping all zero
CHIPID cases to 0x6639.

> +
>         btmtk_data->dev_id = dev_id;
>
>         err = btmtk_register_coredump(hdev, btmtk_data->drv_name, fw_version);
> @@ -1339,6 +1357,7 @@ int btmtk_usb_setup(struct hci_dev *hdev)
>         case 0x7925:
>         case 0x7961:
>         case 0x7902:
> +       case 0x6639:
>                 btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
>                                       fw_version, fw_flavor);
>
> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> index adaf385626ee..6645bcadb523 100644
> --- a/drivers/bluetooth/btmtk.h
> +++ b/drivers/bluetooth/btmtk.h
> @@ -8,6 +8,7 @@
>  #define FIRMWARE_MT7902                "mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin"
>  #define FIRMWARE_MT7961                "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
>  #define FIRMWARE_MT7925                "mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
> +#define FIRMWARE_MT7927                "mediatek/mt6639/BT_RAM_CODE_MT6639_2_1_hdr.bin"

Sorry I did not respond to this earlier.
I would prefer using the mediatek/mt7927/ folder naming here. mt7927
is more widely recognized, and using it would avoid unnecessary
confusion.

>
>  #define HCI_EV_WMT 0xe4
>  #define HCI_WMT_MAX_EVENT_SIZE         64
>
> --
> 2.53.0
>
>