From: "D.W." <sword@gmx.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Network Access Point - pairing problem
Date: Thu, 4 Nov 2004 11:22:29 +0100 (MET) [thread overview]
Message-ID: <7166.1099563749@www18.gmx.net> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 2550 bytes --]
Hi Marcel,
this is the output when I execute hciconfig -a.
hci0: Type: USB
BD Address: 00:02:5B:01:21:14 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:936 acl:0 sco:0 events:23 errors:0
TX bytes:327 acl:0 sco:0 commands:22 errors:0
Features: 0xff 0xff 0x0f 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x110 LMP Ver: 1.1 (0x1) LMP Subver: 0x110
Manufacturer: Cambridge Silicon Radio (10)
This is the output while trying to connect to the NAP at first contact:
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request(0x04) plen 10
B0 3A 4C 3D 0F 00 04 01 52 01
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
B0 3A 4C 3D 0F 00 00
> HCI Event: Command Status(0x0f) plen 4
00 01 09 04
> HCI Event: Role Change(0x12) plen 8
00 B0 3A 4C 3D 0F 00 00
> HCI Event: Connect Complete(0x03) plen 11
00 28 00 B0 3A 4C 3D 0F 00 01 00
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
28 00 0E 00
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
B0 3A 4C 3D 0F 00 01
> HCI Event: Max Slots Change(0x1b) plen 3
28 00 05
> HCI Event: Command Complete(0x0e) plen 6
01 0D 08 00 28 00
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
28 00 18 CC
> HCI Event: Command Status(0x0f) plen 4
00 01 0F 04
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
00 28 00 18 CC
> HCI Event: PIN Code Request(0x16) plen 6
B0 3A 4C 3D 0F 00
< HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23
B0 3A 4C 3D 0F 00 05 42 6C 75 65 5A 00 00 00 00 00 00 00 00
00 00 00
> HCI Event: Command Complete(0x0e) plen 10
01 0D 04 00 B0 3A 4C 3D 0F 00
> HCI Event: Disconn Complete(0x05) plen 4
00 28 00 05
Regards Daniel
--
NEU +++ DSL Komplett von GMX +++ http://www.gmx.net/de/go/dsl
GMX DSL-Netzanschluss + Tarif zum supergünstigen Komplett-Preis!
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2004-11-04 10:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-04 10:22 D.W. [this message]
2004-11-04 11:05 ` [Bluez-users] Network Access Point - pairing problem Marcel Holtmann
2004-11-04 13:43 ` Jouni.Lohikoski@iki.fi
2004-11-04 14:22 ` Marcel Holtmann
2004-11-05 14:00 ` [Bluez-users] AW: Re: Again dund Peter K. Martin
2004-11-05 14:27 ` Marcel Holtmann
2004-11-05 17:46 ` AW: [Bluez-users] " Peter K. Martin
2004-11-05 20:18 ` Marcel Holtmann
2004-11-08 8:50 ` AW: " Peter K. Martin
2004-11-08 11:29 ` Marcel Holtmann
2004-11-08 14:37 ` AW: " Peter K. Martin
2004-11-08 14:54 ` Marcel Holtmann
2004-11-08 18:09 ` AW: " Peter K. Martin
2004-11-08 18:38 ` Marcel Holtmann
2004-11-09 9:01 ` AW: " Peter K. Martin
2004-11-04 12:59 ` [Bluez-users] Network Access Point - pairing problem D.W.
2004-11-04 13:36 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2004-11-03 19:24 D.W.
2004-11-03 20:15 ` Marcel Holtmann
2004-11-02 22:07 D.W.
2004-11-03 0:07 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7166.1099563749@www18.gmx.net \
--to=sword@gmx.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox