Re: Bluetooth 2.1 USB adapter!

Marcel Holtmann
2008-10-01T09:06:21Z

Hi Ville,

> I have A-link dongle with following records. This seems to require the
> same quirk. Tested with v2.6.26-mh4 and btusb module.
>
> hci0: Type: USB
> BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> UP RUNNING
> RX bytes:5385 acl:0 sco:0 events:70 errors:0
> TX bytes:698 acl:0 sco:0 commands:48 errors:0
> Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'null-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 2.1 (0x4) HCI Rev: 0x5111 LMP Ver: 2.1 (0x4) LMP
> Subver: 0x420e
> Manufacturer: Broadcom Corporation (15)
>
> hci0: Type: USB
> BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> Firmware 17.66 / 14

can you give me the simple lsusb and /proc/bus/usb/devices for this one
please.

Regards

Marcel