From: Paul <chemvell@gmail.com>
To: "BlueZ users" <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] ACL connection handle
Date: Tue, 25 Mar 2008 18:30:12 +0530 [thread overview]
Message-ID: <8f5c4ad0803250600q4b36a962w27e57fc3210ebd09@mail.gmail.com> (raw)
In-Reply-To: <d89ddf300803250516j6cf27fdbjf0740759b823435a@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 1560 bytes --]
Brad,
I am using the infineon.When I play through the uart, I will give -D
bluetooth option to aplay and this will create an acl as well as sco
connection and route audio through uart.But if I am using the pcm interface
, I will route audio to the pcm interface on the host connected to the bt
module and use aplay without the bluetooth option right?,So I have to
create an acl connection and then use the hcitool cmd to switch the SCO
interface before I do aplay .So is that necessary to give the command from
inside the audio service ?How would I establish the acl connection? Can I
use rfcomm connect ?
Thanks again for your time,
Regards,
Matt.
On Tue, Mar 25, 2008 at 5:46 PM, Brad Midgley <bmidgley@gmail.com> wrote:
> Paul/Matt
>
> > I have a bluetooth module in which there is an option to select
> the
> > interface (HCI or PCM) for the next SCO connection.This is done by
> sending
> > an HCI command .
>
> the infineon works this way. I believe the timing of this hci command
> (after establishing acl, before establishing sco) will require the
> code to be invoked from inside our audio service.
>
> --
> Brad
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
[-- Attachment #1.2: Type: text/html, Size: 2202 bytes --]
[-- Attachment #2: Type: text/plain, Size: 228 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2008-03-25 13:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-25 12:01 [Bluez-users] ACL connection handle Paul
2008-03-25 12:16 ` Brad Midgley
2008-03-25 13:00 ` Paul [this message]
2008-03-25 14:39 ` Brad Midgley
2008-03-26 16:27 ` Marcel Holtmann
2008-03-27 3:43 ` Brad Midgley
2008-03-27 15:10 ` Marcel Holtmann
2008-03-28 3:05 ` Brad Midgley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8f5c4ad0803250600q4b36a962w27e57fc3210ebd09@mail.gmail.com \
--to=chemvell@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox