Linux bluetooth development
 help / color / mirror / Atom feed
From: Arpit Rai <whalesurf@gmail.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Link Quality between 2 Bluetooth USB Dongles
Date: Tue, 25 Oct 2005 14:35:12 +0800	[thread overview]
Message-ID: <94e407f00510242335r6312f167w909fdbff18069ef8@mail.gmail.com> (raw)
In-Reply-To: <1130174344.7840.2.camel@blade>

[-- Attachment #1: Type: text/plain, Size: 2433 bytes --]

Hi Marcel
 these chips are Broadcom based. So you must ask them how they
implemented the link quality value.
How is the implementation vendor specific?Does it mean that some vendors
don't support Link Quality?Or does it mean that there are other ways of
getting the LQ value?
 Check "hciconfig hci0 features" if they support "Inquiry with RSSI".
[root@175-214 ~]# hciconfig hci0 features
hci0: Type: USB
BD Address: 00:10:60:B3:2C:F7 ACL MTU: 377:10 SCO MTU: 16:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
<transparent SCO> <enhanced iscan> <interlaced iscan>
<interlaced pscan> <AFH cap. slave> <AFH cap. master>
 Well looks like it does support RSSI...but RSSI values change abruptly..for
the same distance the RSSI might be -9 and the after ten seconds its -2 so I
can't use RSSI.
 Do you suggest I try the LQ value with some other bluetooth adaptors?Any
idea as to which model would support the link quality feature?
 Regards
Arpit

 On 10/25/05, Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Arpit,
>
> > [root@174-242 ~]# hciconfig hci0 version
> > hci0: Type: USB
> > BD Address: 00:10:60:B3:2C:F7 ACL MTU: 377:10 SCO MTU: 16:0
> > HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver:
> > 0x309
> > Manufacturer: Broadcom Corporation (15)
>
> these chips are Broadcom based. So you must ask them how they
> implemented the link quality value.
>
> Check "hciconfig hci0 features" if they support "Inquiry with RSSI".
>
> > What is the HCI build version in this case?And how does this help me?
>
> The build id is only valid for CSR chips. It is not fully clear how
> Broadcom encodes this.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by the JBoss Inc.
> Get Certified Today * Register for a JBoss Training Course
> Free Certification Exam for All Training Attendees Through End of 2005
> Visit http://www.jboss.com/services/certification for more information
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>

[-- Attachment #2: Type: text/html, Size: 4374 bytes --]

  reply	other threads:[~2005-10-25  6:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-10-24 14:34 [Bluez-users] Link Quality between 2 Bluetooth USB Dongles Arpit Rai
2005-10-24 14:43 ` Marcel Holtmann
2005-10-24 16:44   ` Arpit Rai
2005-10-24 17:19     ` Marcel Holtmann
2005-10-25  6:35       ` Arpit Rai [this message]
2005-10-25  8:49         ` Marcel Holtmann
2005-10-25 14:53           ` Albert Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=94e407f00510242335r6312f167w909fdbff18069ef8@mail.gmail.com \
    --to=whalesurf@gmail.com \
    --cc=bluez-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox