From: tim culwins <mail0123456789101112@yahoo.com>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] mouse wont connect...
Date: Mon, 19 Feb 2007 09:39:07 -0800 (PST) [thread overview]
Message-ID: <986121.73512.qm@web31703.mail.mud.yahoo.com> (raw)
In-Reply-To: <1171905529.26567.25.camel@violet>
ok i ran sudo hidd --server and it tells me
Can't listen on HID control channel: Address already
in use
i assume that means its already running.
but now im getting a different hcidump, looks like its
connecting but then something is terminating the
connection...
Thank you.
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0A:94:C1:B6:12 class 0x002580 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009)
plen 7
bdaddr 00:0A:94:C1:B6:12 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status
0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 1 bdaddr 00:0A:94:C1:B6:12 type
ACL encrypt 0x00
< HCI Command: Write Link Policy Settings
(0x02|0x000d) plen 4
handle 1 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 1
< HCI Command: Change Connection Packet Type
(0x01|0x000f) plen 4
handle 1 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status
0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen
10
bdaddr 00:0A:94:C1:B6:12 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd
1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 1 slots 5
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 17 scid 0x0062
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0062
result 0 status 0
Connection successful
> HCI Event: Connection Packet Type Changed (0x1d)
plen 5
status 0x00 handle 1 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> HCI Event: Connection Packet Type Changed (0x1d)
plen 5
status 0x00 handle 1 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> ACL data: handle 1 flags 0x02 dlen 40
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen
28
MTU 48 QoS 0x01 (Best effort)
< ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0062 flags 0x00
result 0 clen 0
Success
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0062 flags 0x00 clen
4
MTU 48
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:0A:94:C1:B6:12 name
'Bluetooth Mouse'
> ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00
result 0 clen 0
Success
> HCI Event: QoS Setup Complete (0x0d) plen 21
status 0x00 handle 1 flags 0
Service type: 1
Token rate: 0
Peak bandwith: 0
Latency: 11250
Delay variation: -1
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 19 scid 0x0063
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0063
result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:0A:94:C1:B6:12 role 0x00
Role: Master
> HCI Event: Connection Packet Type Changed (0x1d)
plen 5
status 0x00 handle 1 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> ACL data: handle 1 flags 0x02 dlen 40
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen
28
MTU 48 QoS 0x01 (Best effort)
< ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0063 flags 0x00
result 0 clen 0
Success
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0063 flags 0x00 clen
4
MTU 48
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00
result 0 clen 0
Success
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0063 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 10
L2CAP(d): cid 0x0041 len 6 [psm 19]
HIDP: Data: Input report
0000: 02 00 fe 00 00
.....
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 1 mode 0x02 interval 20
Mode: Sniff
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0063 scid 0x0041
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0062 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0062 scid 0x0040
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 1 mode 0x00 interval 65535
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 1 mode 0x02 interval 40
Mode: Sniff
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 1 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 1 reason 0x16
Reason: Connection Terminated by Local Host
____________________________________________________________________________________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2007-02-19 17:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-19 6:28 [Bluez-users] mouse wont connect tim culwins
2007-02-19 8:40 ` Marcel Holtmann
2007-02-19 16:47 ` tim culwins
2007-02-19 17:18 ` Marcel Holtmann
2007-02-19 17:39 ` tim culwins [this message]
2007-02-19 17:56 ` Marcel Holtmann
2007-02-19 18:16 ` tim culwins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=986121.73512.qm@web31703.mail.mud.yahoo.com \
--to=mail0123456789101112@yahoo.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox