>I'm trying to create a simple piconet consisting of a master and two slaves. I'm using three Digicom Palladio >dongles. >My packages list is: >  - bluez-libs-2.8-1.i386.rpm >  - bluez-bluefw-1.0-1.i386.rpm >  - bluez-hcidump-1.10-1.i386.rpm >  - bluez-sdp-1.5-1.i386.rpm >  - bluez-pan-1.1-1.i386.rpm >  - bluez-utils-2.8-1.i386.rpm >  - bridge-utils-0.9.6-1.i386.rpm > >  On master side I type: >  # hciconfig hci0 up >  # pand --listen --master --role GN > >  On the first slave I type: >  # hciconfig hci0 up >  # hcitool inq >  # pand --connect <master_bt_addr> >  # ifconfig bnep0 10.10.10.2 broadcast 10.10.10.255 netmask 255.255.255.0 > >  if I type >  # hcitool inq >  I obtain: >

>  Inquiry failed.: Device or resource busy

In this point I don't have this problem  "inquiry failed"

> >  On the second slave I type: >  # hciconfig hci0 up >  # hcitool inq >  I only obtain the master bt_addr.

>  # pand --connect <master_bt_addr>

In this point I obtain other devices bluetooth except the master bt_addr, and then i canīt create a network connection with this master.  I can only have a master and a slave.

> >  and >  # ifconfig bnep0 10.10.10.3 broadcast 10.10.10.255 netmask 255.255.255.0 > >  Unfortunally I obtain: > >  SIOCSIFADDR: No such device >  bnep0: unknown interface: No such device >  SIOCSIFBRDADDR: No such device >  bnep0: unknown interface: No such device >  SIOCSIFNETMASK: No such device > >  Can someone tell me what is wrong? Thanks. >  Jers > >