From: "\x11" <semiyd@hotmail.com>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] SCO connection timed out issue
Date: Thu, 18 Oct 2007 12:33:01 +0000 [thread overview]
Message-ID: <BAY117-W28974EACDCC899AC3DF807C09E0@phx.gbl> (raw)
In-Reply-To: <4717360C.7090801@free.fr>
[-- Attachment #1: Type: text/plain, Size: 3506 bytes --]
Hi Fabien:
Thanks a lot for the info!
* Im confused about what you said about the sco function on STLC2500C.According to the IC datasheet of STLC2500C downloaded from 'www.st.com', it says that this chip supports SCO link. So are you saying that this chip simply can't support SCO under linux?(i have a couple of evaluation software of STLC2500C evaluation board under windowXP.It seems that under windows , its SCO link works.But im not very sure about this.)
* i followed your hint and used the command "hciattach ttyUSB0 stlc2500" and then got the following information:
Loading file /lib/firmware/STLC2500_R4_02_04.ptc
Loading file /lib/firmware/STLC2500_R4_02_02_WLAN.ssf
STLC2500 R4.2 12102005 12:40:14
ZAV100012 05HW Id= V440BAA
i copied 2 files:
STLC2500_R4_02_02_WLAN.ssf
STLC2500_R4_02_04.ptc
from the bluez-firmware-1.2/st to the /lib/firmware folder.
i didn't use the "hciattach ttyUSB0 stlc2500 921600" cause this will give the following error:
pl2303 ttyUSB0: pl2303 driver does not support the baudrate requested (fix it)
It seems the pl2303(the serial-USB converter IC on STLC2500C evaluation board) driver does not support the baudrate of 921600.
So up to now , some good improvements have been made thanks to your suggestion. Anyway , i got the same err when i tried to connect using the command :aplay -D bluetooth /1.wav
aplay: main:550: audio open error: Input/output error
hcid[318]: Service owner exited: :1.2
hcid[318]: Audio service (audio) was killed by signal 7
hcid[318]: link_key_request (sba=00:80:E1:00:00:00, dba=00:0D:3C:EB:53:F0)
http://wiki.bluez.org/wiki/HOWTO/AudioDevices says that i can use bluez only without btsco or plugz.It says using the command "aplay -D bluetooth /1.wav" is just fine.So i really have no idea if there's any other command i can use in order to connect the headset based on A2DP.i also don't know whether this "aplay -D bluetooth /1.wav" is aimed to connect the headset with A2DP or SCO.....?
Thank a lot.
semiyd
> Date: Thu, 18 Oct 2007 12:31:40 +0200
> From: fabchevalier@free.fr
> To: bluez-devel@lists.sourceforge.net
> Subject: Re: [Bluez-devel] SCO connection timed out issue
>
> Hi,
>
> Sorry i have to say you this, but you're basically trying to make sth
> work that will never make it ;-)
>
> * STLC2500C does not support sco over hci, so unless your development
> has an audio codec hardwired to the BT chip, you're screwed :-(
> * You need latest bluez-utils CVS to have any chance for your chip
> to run at decent speed, which is required for a2dp streaming. You should
> then use the follwing syntax to start the chip at max speed: hciattach
> /dev/ttyUSB0 stlc2500 921600
>
> Apart from that this is know to work.
>
> Regards,
>
> Fabien
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now>> http://get.splunk.com/
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
_________________________________________________________________
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy!
http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
[-- Attachment #2: Type: text/plain, Size: 314 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2007-10-18 12:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-18 1:36 [Bluez-devel] SCO connection timed out issue \x11
2007-10-18 1:49 ` Brad Midgley
2007-10-18 2:46 ` \x11
2007-10-18 3:14 ` \x11
2007-10-18 13:24 ` Brad Midgley
2007-10-18 13:46 ` \x11
2007-10-18 17:26 ` Brad Midgley
2007-10-19 2:24 ` dong yan
2007-10-18 10:31 ` Fabien Chevalier
2007-10-18 12:13 ` \x11
2007-10-18 12:33 ` \x11 [this message]
2007-10-18 13:08 ` Fabien Chevalier
2007-10-19 3:16 ` \x11
2007-10-19 5:55 ` \x11
2007-10-20 8:05 ` \x11
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BAY117-W28974EACDCC899AC3DF807C09E0@phx.gbl \
--to=semiyd@hotmail.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox