* [Bluez-users] Connection not completing????? DT120 and T3 palm
@ 2004-03-18 16:37 J C
2004-03-18 17:08 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: J C @ 2004-03-18 16:37 UTC (permalink / raw)
To: bluez-users
Hello all,
I am having a problem. I first set up on my linux workstation the
software needed to get my T3 to surf the net through my linux box. That all
seems to work well. I next tried to get it to work on a pc104+ embedded
computer. I am running the same kernel and have set things up the same way.
But when I try to connect the palm to the embedded computer it fails.
I can scan the T3 using hcitool scan. I just am not sure why there is a
disconnect instead of the connection being passed so the dund daemon can
pick it up and start a ppp connection. As I mentioned earlier this all
works on my work station. I have spd, hcid, and dund all running. All the
necessary modules load up fine too. If anyone could please advise me.
Thanks John
Here is a listing from hcidump
HCIDump - HCI packet analyzer ver 1.7
>HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Role Change(0x12) plen 8
>HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
>HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
>HCI Event: Command Complete(0x0e) plen 6
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Connection Packet Type Changed(0x1d) plen 5
>HCI Event: Max Slots Change(0x1b) plen 3
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0029 flags 0x02 dlen 17
L2CAP(d): cid 0x40 len 13 [psm 1]
SDP SS Req: tid 0x0 len 0x8
pat uuid-16 0x1102 (LAN)
max 0x1
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 1]
SDP SS Rsp: tid 0x0 len 0x9
tot 0x1 cur 0x1 hndl 0x805d340
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x1 len 0xc
hndl 0x805d340
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 31
L2CAP(d): cid 0x40 len 27 [psm 1]
SDP SA Rsp: tid 0x1 len 0x16
cnt 0x13
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x2 len 0xc
hndl 0x805d340
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 31
L2CAP(d): cid 0x40 len 27 [psm 1]
SDP SA Rsp: tid 0x2 len 0x16
cnt 0x13
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 1024
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 4 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 328
max_retrans 0 credits 1
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 4 pf 1 ilen 0 fcs 0xbc
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0041
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Disconn Complete(0x05) plen 4
_________________________________________________________________
Get reliable access on MSN 9 Dial-up. 3 months for the price of 1!
(Limited-time offer) http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Bluez-users] Connection not completing????? DT120 and T3 palm
2004-03-18 16:37 [Bluez-users] Connection not completing????? DT120 and T3 palm J C
@ 2004-03-18 17:08 ` Marcel Holtmann
0 siblings, 0 replies; 3+ messages in thread
From: Marcel Holtmann @ 2004-03-18 17:08 UTC (permalink / raw)
To: J C; +Cc: BlueZ Mailing List
Hi John,
> I am having a problem. I first set up on my linux workstation the
> software needed to get my T3 to surf the net through my linux box. That all
> seems to work well. I next tried to get it to work on a pc104+ embedded
> computer. I am running the same kernel and have set things up the same way.
> But when I try to connect the palm to the embedded computer it fails.
>
> I can scan the T3 using hcitool scan. I just am not sure why there is a
> disconnect instead of the connection being passed so the dund daemon can
> pick it up and start a ppp connection. As I mentioned earlier this all
> works on my work station. I have spd, hcid, and dund all running. All the
> necessary modules load up fine too. If anyone could please advise me.
what kernel version do use? What version of the tools are compiled? How
do you start dund?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <BAY14-F18fNwpISMFja000785fd@hotmail.com>]
* Re: [Bluez-users] Connection not completing????? DT120 and T3 palm
[not found] <BAY14-F18fNwpISMFja000785fd@hotmail.com>
@ 2004-03-18 18:25 ` Marcel Holtmann
0 siblings, 0 replies; 3+ messages in thread
From: Marcel Holtmann @ 2004-03-18 18:25 UTC (permalink / raw)
To: J C; +Cc: BlueZ Mailing List
Hi John,
> I am using 2.4.22 on both the workstation and embedded cpu. I
> downloaded the latest tools, bluez-libs-2.5, bluez-pan-1.1,
> bluez-spd-1.5, bluez-utils-2.4, rfcommd-1.2. I load modules
> crc32,bluez,hci_usb,l2cap,bnep, and rfcomm. I have a script with
> these commands: ip_script"starts ip-tables", hciconfig hci0 up, sdpd,
> sdptool add LAN, sdptool add SP, hcid, rfcommd -s, dund -s call
> btpalm. All of these things work on my workstation. dund will see
> the connection and the pppd daemon will run providing me with a ppp
> connection. I am able to the get to the internet with my T3.
don't use the "sdptool add ...", because they are not needed. The dund
will register the SDP record itself and in that case the RFCOMM channel
is correct and not the wrong one. Your T3 tries to connect to channel 2
while dund by default uses channel 1. And don't use rfcommd, because it
is deprecated and not needed anyway.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-03-18 18:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-18 16:37 [Bluez-users] Connection not completing????? DT120 and T3 palm J C
2004-03-18 17:08 ` Marcel Holtmann
[not found] <BAY14-F18fNwpISMFja000785fd@hotmail.com>
2004-03-18 18:25 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).