From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 1 Oct 2007 21:30:59 -0300 Message-Id: MIME-Version: 1.0 From: "vcallegari" To: "bluez-users" Subject: [Bluez-users] Need help to Bluez works on the same distance that Bluesoleil ? Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hello everybody. This is the first time I write, but I'm following Bluez development since some months ago. I have my linux debian with 2.6.22 kernel (unstable) and a dongle USB of CSR, bluecore 4, class 1. Also I have installed the obexftpd to receive archives. Over the same desk, there is a PC of my girlfriend with windows and a software Bluesolei with the same dongle bluetooth. If I am very near, i can send an archive to both computers (my linux and my girlfriend windows) from my mobile, Motorola V3. In fact, over Bluesoleil it always works, but in the Linux, just sometimes. And the Linux is always slower than the Bluesoleil. Now, if I go to another room, the windows continues working without delays, but in the linux only establish the connection obex and then, few seconds later, I receive a timeout. And sometimes not even that. Should that works equal in Linux and Windows, isn't it ? I'd like to know if it has some special configuration that I need, to get the same performance (in the linux and windows) ? I already tried to exchange the dongles between PCs, even I connected the HD of the linux in the PC of my girlfriend, always without success. As far, I read in these cases I have to try > hcidump -X -V, I did it and obtained these lines: 2007-10-01 18:00:23.644457 > ACL data: handle 42 flags 0x02 dlen 47 L2CAP(d): cid 0x0041 len 43 [psm 3] RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 39 fcs 0x9a OBEX: Put cmd(c): len 39 Name (0x01) = Unicode length 14 0000: 00 61 00 61 00 2e 00 6a 00 70 00 67 00 00 .a.a...j.p.g.. Type (0x42) = Sequence length 11 0000: 69 6d 61 67 65 2f 6a 70 65 67 00 image/jpeg. Length (0xc3) = 6215 2007-10-01 18:00:23.645022 < ACL data: handle 42 flags 0x02 dlen 11 L2CAP(d): cid 0x0041 len 7 [psm 3] RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 3 fcs 0x40 OBEX: Put rsp(f): status 100 len 32007-10-01 18:00:23.651443 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 42 packets 1 2007-10-01 18:00:23.662468 > ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0041 len 5 [psm 3] RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 1 2007-10-01 18:00:33.903432 > ACL data: handle 42 flags 0x02 dlen 224 2007-10-01 18:00:44.153415 > ACL data: handle 42 flags 0x01 dlen 224 2007-10-01 18:00:44.154331 < ACL data: handle 42 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9 2007-10-01 18:00:44.155407 > ACL data: handle 42 flags 0x01 dlen 224 2007-10-01 18:01:04.171438 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x08 Reason: Connection Timeout But I cannot understand them. Someone could help-me ? ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users