From: tOpSy TuRvY <topsyturvy@nemo.student.utwente.nl>
To: Peter Stephenson <pws@csr.com>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Slaves in Sniff mode
Date: Wed, 23 Jun 2004 19:15:28 +0200 (CEST) [thread overview]
Message-ID: <Pine.BSO.4.58.0406231904480.29930@nemo.student.utwente.nl> (raw)
In-Reply-To: <200406231606.i5NG6gLM017727@news01.csr.com>
Hi Peter,
Assume that the communication is taking place between two PANUs (i.e.
slaves) in a PAN, where the destination PANU is in sniff mode. From your
answer, am I correct in concluding that:
a) The fact that the receiving PANU is in sniff mode is transparent to the
sender (except that the transfer rate will be lower and there may be some
delays)
b) The queueing you mentioned will take place at the GN
One last question on this issue. Can the GN in Bluez ask the PANU to go
into sniff mode *automatically* based on some criteria (e.g. low
activity), or ask it to come out of sniff mode (e.g. based on a large
queue).
Regards,
Assed
On Wed, 23 Jun 2004, Peter Stephenson wrote:
> tOpSy TuRvY wrote:
> > Hi Marcel,
> >
> > I'm wondering how the master can request an unsniff if the slave is not
> > listening to the channel.
> >
> > I suppose the master should delay transmission till the next sniff window
> > starts (i.e. as Peter suggested). Of course I'm guessing that at this
> > point it could request an unsniff if the packet to be transmitted will
> > not fit the sniff window.
>
> It's designed so that data in sniff is pretty much transparent --- this
> is what HID devices use to achieve low power consumption with low
> latency. (If I made that sound easy, you can take my word for it it
> isn't, particularly with multiple devices :-/)
>
> You can queue data for sending on the host just like normal. You will
> simply find it arrives on the other side in globs. The baseband
> fragments packets as necessary, so you don't have to worry about this at
> the L2CAP level or above.
>
> If you need data to come across faster, you must issue
> HCI_exit_sniff_mode to the link. You don't need to stop data while you
> do that, the link manager traffic will fit in automatically.
>
> pws
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
>
> This footnote also confirms that this email message has been swept by
> MIMEsweeper for the presence of computer viruses.
>
> www.mimesweeper.com
> **********************************************************************
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> digital self defense, top technical experts, no vendor pitches,
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-06-23 17:15 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <E1BcqIi-0002cT-53@sc8-sf-list2.sourceforge.net>
2004-06-22 18:57 ` [Bluez-users] Max Number of PANUs supported in PAN tOpSy TuRvY
2004-06-22 21:30 ` Marcel Holtmann
2004-06-22 22:07 ` tOpSy TuRvY
2004-06-22 22:14 ` Marcel Holtmann
2004-06-23 11:23 ` [Bluez-users] Slaves in Sniff mode tOpSy TuRvY
2004-06-23 12:06 ` Peter Stephenson
2004-06-23 12:16 ` Marcel Holtmann
2004-06-23 12:58 ` tOpSy TuRvY
2004-06-23 13:30 ` Marcel Holtmann
2004-06-23 16:06 ` Peter Stephenson
2004-06-23 16:33 ` Marcel Holtmann
2004-06-23 17:15 ` tOpSy TuRvY [this message]
2004-06-23 17:41 ` Peter Stephenson
2004-06-24 9:43 ` tOpSy TuRvY
2004-06-24 10:09 ` Peter Stephenson
2004-06-24 11:39 ` [Bluez-users] BT_ADDR Address Resolution tOpSy TuRvY
2004-06-24 12:06 ` Marcel Holtmann
2004-06-24 12:26 ` tOpSy TuRvY
2004-06-24 12:31 ` Marcel Holtmann
2004-06-24 12:46 ` tOpSy TuRvY
2004-06-24 12:54 ` Marcel Holtmann
2004-06-23 17:59 ` [Bluez-users] Slaves in Sniff mode Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.BSO.4.58.0406231904480.29930@nemo.student.utwente.nl \
--to=topsyturvy@nemo.student.utwente.nl \
--cc=bluez-users@lists.sourceforge.net \
--cc=pws@csr.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox