Re: [Bluez-users] Bluetooth 2.0 + EDR dongles

[Mitja Pufic <raveer@section-one.org>]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 719 bytes --]

Hello Marcel,

I attached them as text, hope it is ok.

Regards,

Mitja

> Hi Mitja,
> 
> > Do you need any more info on Level1 MDU-0025USB dongle for your list?
> 
> send in the information.
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the JBoss Inc.
> Get Certified Today * Register for a JBoss Training Course
> Free Certification Exam for All Training Attendees Through End of 2005
> Visit http://www.jboss.com/services/certification for more information
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
> 

[-- Attachment #2: Type: TEXT/PLAIN, Size: 1450 bytes --]

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev=19.15
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

[-- Attachment #3: Type: TEXT/PLAIN, Size: 5417 bytes --]

hci0:	Type: USB
	BD Address: 00:09:DD:50:01:C8 ACL MTU: 384:8 SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN AUTH ENCRYPT 
	RX bytes:1979 acl:0 sco:0 events:54 errors:0
	TX bytes:958 acl:0 sco:0 commands:53 errors:0
	Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'Raindrop-3B'
	Class: 0x000100
	Service Classes: Unspecified
	Device Class: Computer, Uncategorized
	HCI Ver: 2.0 (0x3) HCI Rev: 0x77b LMP Ver: 2.0 (0x3) LMP Subver: 0x77b
	Manufacturer: Cambridge Silicon Radio (10)

hci0:	Type: USB
	BD Address: 00:09:DD:50:01:C8 ACL MTU: 384:8 SCO MTU: 64:8
	HCI 19.2
	Chip version: BlueCore4-External
	Max key size: 56 bit
	SCO mapping:  HCI

hci0:	Type: USB
	BD Address: 00:09:DD:50:01:C8 ACL MTU: 384:8 SCO MTU: 64:8
	Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
		<3-slot packets> <5-slot packets> <encryption> <slot offset> 
		<timing accuracy> <role switch> <hold mode> <sniff mode> 
		<park state> <RSSI> <channel quality> <SCO link> <HV2 packets> 
		<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> 
		<power control> <transparent SCO> <broadcast encrypt> 
		<EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> 
		<interlaced iscan> <interlaced pscan> <inquiry with RSSI> 
		<extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> 
		<AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> 
		<AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> 
		<EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features> 

hci0:	Type: USB
	BD Address: 00:09:DD:50:01:C8 ACL MTU: 384:8 SCO MTU: 64:8
	Commands: Octet 0  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 1  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 2  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 3  = 0x03 (Bit 0 1)
		  Octet 4  = 0xfe (Bit 1 2 3 4 5 6 7)
		  Octet 5  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 6  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 7  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 8  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 9  = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 10 = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 11 = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 12 = 0xf3 (Bit 0 1 4 5 6 7)
		  Octet 13 = 0x0f (Bit 0 1 2 3)
		  Octet 14 = 0xf8 (Bit 3 4 5 6 7)
		  Octet 15 = 0xff (Bit 0 1 2 3 4 5 6 7)
		  Octet 16 = 0x3f (Bit 0 1 2 3 4 5)
	'Inquiry' 'Inquiry Cancel' 'Periodic Inquiry Mode' 
	'Exit Periodic Inquiry Mode' 'Create Connection' 'Disconnect' 
	'Add SCO Connection' 'Cancel Create Connection' 
	'Accept Connection Request' 'Reject Connection Request' 
	'Link Key Request Reply' 'Link Key Request Negative Reply' 
	'PIN Code Request Reply' 'PIN Code Request Negative Reply' 
	'Change Connection Packet Type' 'Authentication Requested' 
	'Set Connection Encryption' 'Change Connection Link Key' 
	'Master Link Key' 'Remote Name Request' 'Cancel Remote Name Request' 
	'Read Remote Supported Features' 'Read Remote Extended Features' 
	'Read Remote Version Information' 'Read Clock Offset' 
	'Read LMP Handle' 'Hold Mode' 'Sniff Mode' 'Exit Sniff Mode' 
	'Park State' 'Exit Park State' 'QoS Setup' 'Role Discovery' 
	'Switch Role' 'Read Link Policy Settings' 'Write Link Policy Settings' 
	'Read Default Link Policy Settings' 
	'Write Default Link Policy Settings' 'Flow Specification' 
	'Set Event Mask' 'Reset' 'Set Event Filter' 'Flush' 'Read PIN Type' 
	'Write PIN Type' 'Create New Unit Key' 'Read Stored Link Key' 
	'Write Stored Link Key' 'Delete Stored Link Key' 'Write Local Name' 
	'Read Local Name' 'Read Connection Accept Timeout' 
	'Write Connection Accept Timeout' 'Read Page Timeout' 
	'Write Page Timeout' 'Read Scan Enable' 'Write Scan Enable' 
	'Read Page Scan Activity' 'Write Page Scan Activity' 
	'Read Inquiry Scan Activity' 'Write Inquiry Scan Activity' 
	'Read Authentication Enable' 'Write Authentication Enable' 
	'Read Encryption Mode' 'Write Encryption Mode' 'Read Class Of Device' 
	'Write Class Of Device' 'Read Voice Setting' 'Write Voice Setting' 
	'Read Automatic Flush Timeout' 'Write Automatic Flush Timeout' 
	'Read Num Broadcast Retransmissions' 
	'Write Num Broadcast Retransmissions' 'Read Hold Mode Activity' 
	'Write Hold Mode Activity' 'Read Transmit Power Level' 
	'Read Synchronous Flow Control Enable' 
	'Write Synchronous Flow Control Enable' 
	'Set Host Controller To Host Flow Control' 'Host Buffer Size' 
	'Host Number Of Completed Packets' 'Read Link Supervision Timeout' 
	'Write Link Supervision Timeout' 'Read Number of Supported IAC' 
	'Read Current IAC LAP' 'Write Current IAC LAP' 'Reserved' 'Reserved' 
	'Read Page Scan Mode' 'Write Page Scan Mode' 
	'Set AFH Channel Classification' 'Read Inquiry Scan Type' 
	'Write Inquiry Scan Type' 'Read Inquiry Mode' 'Write Inquiry Mode' 
	'Read Page Scan Type' 'Write Page Scan Type' 
	'Read AFH Channel Assessment Mode' 'Write AFH Channel Assessment Mode' 
	'Read Loacal Version Information' 'Reserved' 
	'Read Local Supported Features' 'Read Local Extended Features' 
	'Read Buffer Sizer' 'Read Country Code' 'Read BD ADDR' 
	'Read Failed Contact Counter' 'Reset Failed Contact Counter' 
	'Get Link Quality' 'Read RSSI' 'Read AFH Channel Map' 'Read BD Clock' 
	'Read Loopback Mode' 'Write Loopback Mode' 
	'Enable Device Under Test Mode' 'Setup Synchronous Connection' 
	'Accept Synchronous Connection' 'Reject Synchronous Connection'