From: "João Santos" <jsantos_pt@hotmail.com>
To: marcel@holtmann.org
Cc: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] sdptool setattr
Date: Tue, 03 Feb 2004 19:02:59 +0000 [thread overview]
Message-ID: <Sea2-F67Qra6aPYpklD00036305@hotmail.com> (raw)
hi Marcel,
>it is not possible, because setattr only supports UUID16, UINT32 and
>STR8. You must fix the add_headset() function of sdptool or extend the
>set_attrib() routine to recognize boolean input.
i have extend the set_attrib() function:
}else if(!strncasecmp(value,"b",1)) {
/*Boolean*/
printf("Adding attrib 0x%X bool %s to record 0x%X\n",
attrib, value+1, handle);
sdp_attr_add_new(rec, attrib, SDP_BOOL, value+1);
}
and the sdp_data_printf(),
case SDP_BOOL:
printf("%.*sBool 0x%x\n", indent, indent_spaces,
sdpdata->val.uint32);
break;
i have add the attrib doing;
[root@olivia tools]# sdptool setattr 0x804f738 0x0302 bFalse
Adding attrib 0x302 bool False to record 0x804F738
[root@olivia tools]# sdptool get --tree 0x804f738
Attribute Identifier : 0x0 - ServiceRecordHandle
Integer : 0x804f738
Attribute Identifier : 0x1 - ServiceClassIDList
Data Sequence
UUID16 : 0x1108 - Headset
UUID16 : 0x1203 - GenericAudio
Attribute Identifier : 0x4 - ProtocolDescriptorList
Data Sequence
Data Sequence
UUID16 : 0x0100 - L2CAP
Data Sequence
UUID16 : 0x0003 - RFCOMM
Channel/Port (Integer) : 0xc
Attribute Identifier : 0x5 - BrowseGroupList
Data Sequence
UUID16 : 0x1002 - PublicBrowseGroup (SDP)
Attribute Identifier : 0x9 - BluetoothProfileDescriptorList
Data Sequence
Data Sequence
UUID16 : 0x1108 - Headset
Version (Integer) : 0x100
Attribute Identifier : 0x100
Text : "Headset"
Attribute Identifier : 0x302 - Remote audio volume control
Bool 0x46
but the problem remaind the same;
[root@olivia jsantos]# hcidump -a
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection(0x01|0x0005) plen 13
. . . W ` . . . . . . . .
>HCI Event: Command Status(0x0f) plen 4
. . . .
>HCI Event: Link Key Request(0x17) plen 6
. . . W ` .
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
. . . W ` . . . * ` . . . . . . . 3 . .
. .
>HCI Event: Command Complete(0x0e) plen 10
. . . . . . . W ` .
>HCI Event: Connect Complete(0x03) plen 11
. ) . . . . W ` . . .
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
) . . .
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>HCI Event: Command Complete(0x0e) plen 6
. . . . ) .
>HCI Event: QoS Setup Complete(0x0d) plen 21
. ) . . . . . . . . . . . . . . . . . .
.
>ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1024
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 16
>ACL data: handle 0x0029 flags 0x01 dlen 16
>ACL data: handle 0x0029 flags 0x01 dlen 8
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 28
MTU 32772 Unknown (type 03, len 22)
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 24 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 1019
max_retrans 0 credits 7
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 16
>ACL data: handle 0x0029 flags 0x01 dlen 2
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 24 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size 324
max_retrans 0 credits 0
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 24 pf 1 ilen 0 fcs 0xa2
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 24 pf 1 ilen 0 fcs 0x69
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x40 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 24 pf 1 ilen 0 fcs 0x12
!
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x40 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 24 pf 1 ilen 0 fcs 0xc8
.
< ACL data: handle 0x0029 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 13 fcs 0xe
A T + C K P D = 2 0 0 . .
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): RPN CMD: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 24 br: 7 db: 3 sb: 0 p: 0 pt: 0 xi: 0 xo: 0
rtri: 0 rtro: 0 rtci: 0 rtco: 0 xon: 17 xoff: 19 pm: 006f
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): RPN RSP: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 24 br: 0 db: 3 sb: 0 p: 0 pt: 0 xi: 0 xo: 0
rtri: 0 rtro: 0 rtci: 0 rtco: 0 xon: 0 xoff: 0 pm: 3f7f
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0029 flags 0x02 dlen 17
L2CAP(d): cid 0x41 len 13 [psm 1]
SDP SS Req: tid 0x19 len 0x8
pat uuid-16 0x1108 (Headset)
max 0xff
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x41 len 14 [psm 1]
SDP SS Rsp: tid 0x19 len 0x9
cur 0x1 tot 0x1 hndl 0x804f738
cont 00
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 1 len 3
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 21
L2CAP(d): cid 0x41 len 17 [psm 1]
SDP SA Req: tid 0x1a len 0xc
hndl 0x804f738
max 0xff
aid(s) 0x0302 ((null))
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 19
L2CAP(d): cid 0x41 len 15 [psm 1]
SDP SA Rsp: tid 0x1a len 0xa
cnt 0x7
aid 0x0302 (unknown)
bool 0x46
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 15
L2CAP(d): cid 0x40 len 11 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 24 pf 1 ilen 6 fcs 0xc8
. . . O K . .
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0029 flags 0x02 dlen 31
L2CAP(d): cid 0x41 len 27 [psm 1]
SDP SS Req: tid 0x1b len 0x16
pat uuid-128 0x5555
max 0xff
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(d): cid 0x41 len 10 [psm 1]
SDP SS Rsp: tid 0x1b len 0x5
cur 0x0 tot 0x0
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
>HCI Event: Number of Completed Packets(0x13) plen 5
. ) . . .
>HCI Event: Connect Request(0x04) plen 10
. . . W ` . . . . .
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
. . . W ` . .
>HCI Event: Command Status(0x0f) plen 4
. . . .
>HCI Event: Connect Complete(0x03) plen 11
. ( . . . . W ` . . .
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
( . .
>HCI Event: Command Status(0x0f) plen 4
. . . .
>HCI Event: Connection Packet Type Changed(0x1d) plen 5
. ) . .
>HCI Event: Disconn Complete(0x05) plen 4
. ( . .
>HCI Event: Connect Request(0x04) plen 10
. . . W ` . . . . .
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
. . . W ` . .
>HCI Event: Command Status(0x0f) plen 4
. . . .
>HCI Event: Connect Complete(0x03) plen 11
. , . . . . W ` . . .
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
, . .
>HCI Event: Command Status(0x0f) plen 4
. . . .
>HCI Event: Connection Packet Type Changed(0x1d) plen 5
. ) . .
i still have problems in the 0x0302 attr, maybe i don't do the correct
modification in the set_attr().
Thanks
João Santos.
_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
next reply other threads:[~2004-02-03 19:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-03 19:02 João Santos [this message]
2004-02-03 23:46 ` [Bluez-users] sdptool setattr Marcel Holtmann
2004-02-04 18:11 ` [Bluez-users] How can I start to investigate SDP Header Srihathai Prammanee
-- strict thread matches above, loose matches on Subject: below --
2004-01-28 18:07 [Bluez-users] sdptool setattr João Santos
2004-01-28 18:17 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Sea2-F67Qra6aPYpklD00036305@hotmail.com \
--to=jsantos_pt@hotmail.com \
--cc=bluez-users@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox