From: Mat Martineau <mathewm@codeaurora.org>
To: Andrei Emeltchenko <Andrei.Emeltchenko.news@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCHv1 11/12] Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evt
Date: Thu, 1 Nov 2012 10:51:19 -0700 (PDT) [thread overview]
Message-ID: <alpine.DEB.2.02.1211011045260.9973@mathewm-linux> (raw)
In-Reply-To: <1351691197-8394-12-git-send-email-Andrei.Emeltchenko.news@gmail.com>
Andrei -
On Wed, 31 Oct 2012, Andrei Emeltchenko wrote:
> From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
>
> When receiving HCI Phylink Complete event run amp_physical_cfm
> which initialize BR/EDR L2CAP channel associated with High Speed
> link and run l2cap_physical_cfm which shall send L2CAP Create
> Chan Request.
>
> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
> ---
> include/net/bluetooth/amp.h | 1 +
> include/net/bluetooth/l2cap.h | 1 +
> net/bluetooth/amp.c | 24 ++++++++++++++++++++++++
> net/bluetooth/hci_event.c | 15 ++-------------
> 4 files changed, 28 insertions(+), 13 deletions(-)
>
> diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h
> index f1c0017..7ea3db7 100644
> --- a/include/net/bluetooth/amp.h
> +++ b/include/net/bluetooth/amp.h
> @@ -46,6 +46,7 @@ void amp_accept_phylink(struct hci_dev *hdev, struct amp_mgr *mgr,
> struct hci_conn *hcon);
> void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle);
> void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle);
> +void amp_physical_cfm(struct hci_conn *bredr_hcon, struct hci_conn *hs_hcon);
> void amp_create_logical_link(struct l2cap_chan *chan);
> void amp_disconnect_logical_link(struct hci_chan *hchan);
> void amp_destroy_logical_link(struct hci_chan *hchan, u8 reason);
> diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
> index 24c61ef..18149c8 100644
> --- a/include/net/bluetooth/l2cap.h
> +++ b/include/net/bluetooth/l2cap.h
> @@ -812,5 +812,6 @@ void l2cap_send_conn_req(struct l2cap_chan *chan);
> void l2cap_move_start(struct l2cap_chan *chan);
> void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
> u8 status);
> +void l2cap_physical_cfm(struct l2cap_chan *chan, int result);
>
> #endif /* __L2CAP_H */
> diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c
> index 917e034..650bb8d 100644
> --- a/net/bluetooth/amp.c
> +++ b/net/bluetooth/amp.c
> @@ -373,6 +373,30 @@ void amp_accept_phylink(struct hci_dev *hdev, struct amp_mgr *mgr,
> hci_send_cmd(hdev, HCI_OP_ACCEPT_PHY_LINK, sizeof(cp), &cp);
> }
>
> +void amp_physical_cfm(struct hci_conn *bredr_hcon, struct hci_conn *hs_hcon)
> +{
> + struct hci_dev *bredr_hdev = hci_dev_hold(bredr_hcon->hdev);
> + struct amp_mgr *mgr = hs_hcon->amp_mgr;
> + struct l2cap_chan *bredr_chan;
> +
> + BT_DBG("bredr_hcon %p hs_hcon %p mgr %p", bredr_hcon, hs_hcon, mgr);
> +
> + if (!bredr_hdev || !mgr || !mgr->bredr_chan)
> + return;
> +
> + bredr_chan = mgr->bredr_chan;
> +
> + set_bit(FLAG_EFS_ENABLE, &bredr_chan->flags);
> + bredr_chan->ctrl_id = hs_hcon->remote_id;
> + bredr_chan->hs_hcon = hs_hcon;
> + bredr_chan->conn->mtu = hs_hcon->hdev->block_mtu;
> + bredr_chan->fcs = L2CAP_FCS_NONE;
Sorry I missed this earlier: bredr_chan needs to be locked before
changing it. I suggest passing the information to l2cap_physical_cfm
and letting that function update the structure members while it holds
the lock.
> +
> + l2cap_physical_cfm(bredr_chan, 0);
> +
> + hci_dev_put(bredr_hdev);
> +}
> +
> void amp_create_logical_link(struct l2cap_chan *chan)
> {
> struct hci_cp_create_accept_logical_link cp;
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index 03d51a1..0b37f55 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -3697,20 +3697,9 @@ static void hci_phy_link_complete_evt(struct hci_dev *hdev,
> hci_conn_hold_device(hcon);
> hci_conn_add_sysfs(hcon);
>
> - hci_dev_unlock(hdev);
> -
> - if (hcon->out) {
> - struct hci_dev *bredr_hdev = hci_dev_hold(bredr_hcon->hdev);
> -
> - if (!bredr_hdev)
> - return;
> + amp_physical_cfm(bredr_hcon, hcon);
>
> - /* Placeholder - create chan req
> - l2cap_chan_create_cfm(bredr_hcon, hcon->remote_id);
> - */
> -
> - hci_dev_put(bredr_hdev);
> - }
> + hci_dev_unlock(hdev);
> }
>
> static void hci_loglink_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
> --
> 1.7.9.5
>
>
Regards,
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-11-01 17:51 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-16 15:01 [RFCv0 0/8] Handling physical and logical link Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 1/8] Bluetooth: AMP: Process Physical Link Complete evt Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 2/8] Bluetooth: AMP: Process Logical Link complete evt Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 3/8] Bluetooth: Add logical link create function Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 4/8] Bluetooth: AMP: Process Disc Logical Link Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 5/8] Bluetooth: AMP: Process Disc Physical Link complete evt Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 6/8] Bluetooth: AMP: Remove hci_conn receiving error command status Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 7/8] Bluetooth: Disconnect logical link when deleteing chan Andrei Emeltchenko
2012-10-16 15:01 ` [RFCv0 8/8] Bluetooth: Add put(hcon) when deleting hchan Andrei Emeltchenko
2012-10-17 17:07 ` [RFCv0 0/8] Handling physical and logical link Marcel Holtmann
2012-10-18 10:44 ` Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 00/11] " Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 01/11] Bluetooth: trivial: Remove unneeded assignment Andrei Emeltchenko
2012-10-25 13:06 ` Marcel Holtmann
2012-10-25 12:20 ` [RFCv1 02/11] Bluetooth: Use helper function sending EFS conf rsp Andrei Emeltchenko
2012-10-25 13:07 ` Marcel Holtmann
2012-10-25 12:20 ` [RFCv1 03/11] Bluetooth: AMP: Process Physical Link Complete evt Andrei Emeltchenko
2012-10-26 17:16 ` Mat Martineau
2012-10-29 9:22 ` Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 04/11] Bluetooth: AMP: Process Logical Link complete evt Andrei Emeltchenko
2012-10-25 13:08 ` Marcel Holtmann
2012-10-25 12:20 ` [RFCv1 05/11] Bluetooth: AMP: Add Logical Link Create function Andrei Emeltchenko
2012-10-26 17:01 ` Mat Martineau
2012-10-29 9:24 ` Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 06/11] Bluetooth: AMP: Process Disc Logical Link Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 07/11] Bluetooth: AMP: Process Disc Physical Link Complete evt Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 08/11] Bluetooth: AMP: Remove hci_conn receiving error command status Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 09/11] Bluetooth: Disconnect logical link when deleteing chan Andrei Emeltchenko
2012-10-25 12:20 ` [RFCv1 10/11] Bluetooth: Add put(hcon) when deleting hchan Andrei Emeltchenko
2012-10-25 13:09 ` Marcel Holtmann
2012-10-25 15:22 ` Gustavo Padovan
2012-10-25 12:20 ` [RFCv1 11/11] Bluetooth: AMP: Check for hs_hcon instead of ctrl_id Andrei Emeltchenko
2012-10-25 13:09 ` Marcel Holtmann
2012-10-25 13:11 ` [RFCv1 00/11] Handling physical and logical link Marcel Holtmann
2012-10-25 13:35 ` Andrei Emeltchenko
2012-10-26 17:27 ` Mat Martineau
2012-10-30 15:52 ` [RFCv2 00/12] " Andrei Emeltchenko
2012-10-30 15:52 ` [RFCv2 01/12] Bluetooth: trivial: Fix braces style and remove empty line Andrei Emeltchenko
2012-10-30 16:45 ` Marcel Holtmann
2012-10-30 15:52 ` [RFCv2 02/12] Bluetooth: Save hs_hchan instead of hs_hcon in loglink complete Andrei Emeltchenko
2012-10-30 16:46 ` Marcel Holtmann
2012-10-30 15:52 ` [RFCv2 03/12] Bluetooth: Return correct L2CAP response type Andrei Emeltchenko
2012-10-30 16:49 ` Marcel Holtmann
2012-10-30 17:16 ` Andrei Emeltchenko
2012-10-30 17:48 ` Marcel Holtmann
2012-10-30 15:52 ` [RFCv2 04/12] Bluetooth: Derive remote and local amp id from chan struct Andrei Emeltchenko
2012-10-30 16:49 ` Marcel Holtmann
2012-10-30 15:52 ` [RFCv2 05/12] Bluetooth: AMP: Add Logical Link Create function Andrei Emeltchenko
2012-10-30 15:52 ` [RFCv2 06/12] Bluetooth: AMP: Process Disc Logical Link Andrei Emeltchenko
2012-10-30 15:52 ` [RFCv2 07/12] Bluetooth: AMP: Process Disc Physical Link Complete evt Andrei Emeltchenko
2012-10-30 15:53 ` [RFCv2 08/12] Bluetooth: AMP: Remove hci_conn receiving error command status Andrei Emeltchenko
2012-10-30 15:53 ` [RFCv2 09/12] Bluetooth: Disconnect logical link when deleteing chan Andrei Emeltchenko
2012-10-30 15:53 ` [RFCv2 10/12] Bluetooth: AMP: Check for hs_hcon instead of ctrl_id Andrei Emeltchenko
2012-10-30 16:50 ` Marcel Holtmann
2012-10-30 15:53 ` [RFCv2 11/12] Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evt Andrei Emeltchenko
2012-10-30 16:51 ` Marcel Holtmann
2012-10-30 15:53 ` [RFCv2 12/12] Bluetooth: Process Create Chan Request Andrei Emeltchenko
2012-10-30 16:53 ` Marcel Holtmann
2012-10-31 13:46 ` [PATCHv1 00/12] Handling physical and logical link fixes Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 01/12] Bluetooth: trivial: Fix braces style and remove empty line Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 02/12] Bluetooth: Save hs_hchan instead of hs_hcon in loglink complete Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 03/12] Bluetooth: Return correct L2CAP response type Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 04/12] Bluetooth: Derive remote and local amp id from chan struct Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 05/12] Bluetooth: AMP: Add Logical Link Create function Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 06/12] Bluetooth: AMP: Process Disc Logical Link Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 07/12] Bluetooth: AMP: Process Disc Physical Link Complete evt Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 08/12] Bluetooth: AMP: Remove hci_conn receiving error command status Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 09/12] Bluetooth: Disconnect logical link when deleteing chan Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 10/12] Bluetooth: AMP: Check for hs_hcon instead of ctrl_id Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 11/12] Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evt Andrei Emeltchenko
2012-10-31 18:51 ` Gustavo Padovan
2012-11-01 17:51 ` Mat Martineau [this message]
2012-11-02 7:48 ` Andrei Emeltchenko
2012-11-02 15:39 ` Mat Martineau
2012-11-12 9:26 ` Andrei Emeltchenko
2012-11-13 17:29 ` Mat Martineau
2012-11-13 22:49 ` Marcel Holtmann
2012-11-14 12:19 ` Andrei Emeltchenko
2012-10-31 13:46 ` [PATCHv1 12/12] Bluetooth: Process Create Chan Request Andrei Emeltchenko
2012-10-31 16:24 ` Marcel Holtmann
2012-11-01 8:55 ` Andrei Emeltchenko
2012-11-01 13:37 ` [PATCH 1/2] " Andrei Emeltchenko
2012-11-01 13:37 ` [PATCH 2/2] Bluetooth: Rename ctrl_id to remote_amp_id Andrei Emeltchenko
2012-11-02 0:31 ` Marcel Holtmann
2012-11-02 0:30 ` [PATCH 1/2] Bluetooth: Process Create Chan Request Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1211011045260.9973@mathewm-linux \
--to=mathewm@codeaurora.org \
--cc=Andrei.Emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).