[bluez/bluez] 54142e: test-runner: Add -U/--usb option

[bluez/bluez] 54142e: test-runner: Add -U/--usb option

[Luiz Augusto von Dentz]

  Branch: refs/heads/973550
  Home:   https://github.com/bluez/bluez
  Commit: 54142ed08d395182f7edb7d2aa2922ef9f927bc5
      https://github.com/bluez/bluez/commit/54142ed08d395182f7edb7d2aa2922ef9f927bc5
  Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
  Date:   2025-06-18 (Wed, 18 Jun 2025)

  Changed paths:
    M tools/test-runner.c

  Log Message:
  -----------
  test-runner: Add -U/--usb option

This adds option to use a host controller plugged over USB:

> tools/test-runner -U "usb-host,vendorid=0x8087,productid=0x0036"... -- /bin/bash
> dmesg
[    1.046214] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.192623] Bluetooth: hci0: Firmware timestamp 2025.18 buildtype 2 build 82364
[    1.192638] Bluetooth: hci0: Firmware SHA1: 0xa66e016b
[    1.197362] Bluetooth: hci0: Fseq status: Success (0x00)
[    1.197368] Bluetooth: hci0: Fseq executed: 00.00.04.196
[    1.197371] Bluetooth: hci0: Fseq BT Top: 00.00.04.197
> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0036 Intel Corp. BE200 Bluetooth
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub


  Commit: 8fc8434b1afc209440effa2a9c95c112ae09586b
      https://github.com/bluez/bluez/commit/8fc8434b1afc209440effa2a9c95c112ae09586b
  Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
  Date:   2025-06-18 (Wed, 18 Jun 2025)

  Changed paths:
    M doc/test-runner.rst

  Log Message:
  -----------
  test-runner.rst: Add documentation for USB-passthrough

This documents the newly added option -U/--usb and adds a dedicated
section that explains the required the kernel image to build with
some extra config options to enable passing -device qemu-xhci in order
to use -device usb-host.


  Commit: 5f173704514c9e14138eaa20e4151afeca90f0a8
      https://github.com/bluez/bluez/commit/5f173704514c9e14138eaa20e4151afeca90f0a8
  Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
  Date:   2025-06-18 (Wed, 18 Jun 2025)

  Changed paths:
    M doc/tester.config

  Log Message:
  -----------
  tester.config: Add config options for USB-passthrough and drivers

This adds the necessary options in order to enable USB-passthrough
configuration and also enable most of the drivers so they get
build-tested.


Compare: https://github.com/bluez/bluez/compare/54142ed08d39%5E...5f173704514c

To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications