[bluez/bluez] 5810cb: mesh: acceptor: increase interval for unprovisione...

[bluez/bluez] 5810cb: mesh: acceptor: increase interval for unprovisione...

[Christian Eggers]

  Branch: refs/heads/977765
  Home:   https://github.com/bluez/bluez
  Commit: 5810cb647382acdd368fe31e568ad36b4318c185
      https://github.com/bluez/bluez/commit/5810cb647382acdd368fe31e568ad36b4318c185
  Author: Christian Eggers <ceggers@arri.de>
  Date:   2025-07-01 (Tue, 01 Jul 2025)

  Changed paths:
    M mesh/prov-acceptor.c

  Log Message:
  -----------
  mesh: acceptor: increase interval for unprovisioned device beacon

I cannot find a specific interval for sending unprovisioned device
beacons in MshPRT_v1.1, section 3.10.2/5.2.1. The current interval of
500 ms seems to cause interferience with normal advertising messages,
maybe this is controller dependent (seen on RTL8761BU).

A beacon interval of 1000 ms should be sufficient for scanning (e.g. by
a provisioner) while allowing normal advertising messages to be
transmitted.


  Commit: 796b0e6a6588b63354ee3733ffc589982ecfa62a
      https://github.com/bluez/bluez/commit/796b0e6a6588b63354ee3733ffc589982ecfa62a
  Author: Christian Eggers <ceggers@arri.de>
  Date:   2025-07-01 (Tue, 01 Jul 2025)

  Changed paths:
    M Makefile.mesh
    A mesh/gatt-service.c
    A mesh/gatt-service.h
    A mesh/pb-gatt.c
    A mesh/pb-gatt.h
    M mesh/prov-acceptor.c

  Log Message:
  -----------
  mesh: add support for provisioning via GATT

ToDo: Consider moving dbus_client instance into separate singleton, so
that no destruction/construction is necessary when switching from GATT
provisioning service to GATT proxy service (see next commit).


  Commit: fb20d62fda1d971e0e0679866f109c353ab1de93
      https://github.com/bluez/bluez/commit/fb20d62fda1d971e0e0679866f109c353ab1de93
  Author: Christian Eggers <ceggers@arri.de>
  Date:   2025-07-01 (Tue, 01 Jul 2025)

  Changed paths:
    M Makefile.mesh
    A mesh/gatt-proxy-svc.c
    A mesh/gatt-proxy-svc.h
    M mesh/main.c
    M mesh/net-keys.c
    M mesh/net-keys.h
    M mesh/net.c
    M mesh/net.h
    M mesh/prov-acceptor.c

  Log Message:
  -----------
  mesh: add GATT proxy service

FIXME: net.c: determine whether data shall be sent via mesh_io or
gatt_proxy


  Commit: 189ecb870d7baecc6b5aa96df9d39948117198e5
      https://github.com/bluez/bluez/commit/189ecb870d7baecc6b5aa96df9d39948117198e5
  Author: Christian Eggers <ceggers@arri.de>
  Date:   2025-07-01 (Tue, 01 Jul 2025)

  Changed paths:
    M Makefile.mesh
    M mesh/crypto.c
    M mesh/crypto.h
    M mesh/net-keys.c
    M mesh/net-keys.h
    M mesh/net.c
    A mesh/proxy-cfg.c
    A mesh/proxy-cfg.h

  Log Message:
  -----------
  mesh: initial support for proxy configuration messages via GATT

Implement reception and response for Proxy Configuration Messages
(MshPRT_v1.1, section 6.6).

ToDo: Apply configured filters.


Compare: https://github.com/bluez/bluez/compare/5810cb647382%5E...189ecb870d7b

To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications