From: Luiz Augusto von Dentz <noreply@github.com>
To: linux-bluetooth@vger.kernel.org
Subject: [bluez/bluez] 6ca24f: doc/btmon: Split Advertising and Scanning into btm...
Date: Wed, 25 Mar 2026 13:59:27 -0700 [thread overview]
Message-ID: <bluez/bluez/push/refs/heads/master/1436ea-097196@github.com> (raw)
Branch: refs/heads/master
Home: https://github.com/bluez/bluez
Commit: 6ca24f69351e0b97df96e843fe9e557a407796fb
https://github.com/bluez/bluez/commit/6ca24f69351e0b97df96e843fe9e557a407796fb
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-advertising.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Split Advertising and Scanning into btmon-advertising.rst
Move the ADVERTISING AND SCANNING section into a standalone file and
replace it with an RST include directive. This allows the
btsnoop-analyzer to load only the relevant documentation for
advertising/scanning focus-area analysis instead of the full btmon.rst.
Commit: d6e2bf9a3a2bebaae12cc633aefea6e9b72f9bf7
https://github.com/bluez/bluez/commit/d6e2bf9a3a2bebaae12cc633aefea6e9b72f9bf7
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-le-audio.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Split LE Audio Protocol Flow into btmon-le-audio.rst
Move the LE AUDIO PROTOCOL FLOW section (including CIS unicast,
BIS broadcast, and BIG sync flows) into a standalone file and
replace it with an RST include directive. This is the largest
split section (660 lines) and was being truncated away in
context-limited analysis.
Commit: 042e211cd0219b554f707bc6369118b245575329
https://github.com/bluez/bluez/commit/042e211cd0219b554f707bc6369118b245575329
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-l2cap.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Split L2CAP Channel Tracking into btmon-l2cap.rst
Move the L2CAP CHANNEL TRACKING section into a standalone file and
replace it with an RST include directive.
Commit: 2bcd75cd75eabba5f9ec1fc37a0a83b55ed24965
https://github.com/bluez/bluez/commit/2bcd75cd75eabba5f9ec1fc37a0a83b55ed24965
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-smp.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Split SMP Pairing Flow into btmon-smp.rst
Move the SMP PAIRING FLOW section into a standalone file and replace
it with an RST include directive.
Commit: d991284294f4243aadd8f3475352221d7a905da1
https://github.com/bluez/bluez/commit/d991284294f4243aadd8f3475352221d7a905da1
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-gatt.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Split GATT Database Reconstruction into btmon-gatt.rst
Move the RECONSTRUCTING A GATT DATABASE FROM SNOOP TRACES section
into a standalone file and replace it with an RST include directive.
Commit: 838c717f9dfbe5dbca24dbb258e269f939d59647
https://github.com/bluez/bluez/commit/838c717f9dfbe5dbca24dbb258e269f939d59647
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-connections.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Split Connection Tracking into btmon-connections.rst
Move the CONNECTION TRACKING and HCI ERROR AND DISCONNECT REASON CODES
sections into a standalone file and replace them with an RST include
directive.
Commit: 60a32f8c7517485d7f615bc605b81524e22b3c11
https://github.com/bluez/bluez/commit/60a32f8c7517485d7f615bc605b81524e22b3c11
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-hci-init.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Add HCI initialization sequence documentation
Document the multi-stage HCI controller initialization performed by
the kernel (net/bluetooth/hci_sync.c). The four stages cover reset
and identity, capability discovery, event mask configuration, and
final setup. This helps trace readers distinguish normal init traffic
from application-level issues.
Commit: 173fad8fbe9f254ec1da51c793e9b5315610b16c
https://github.com/bluez/bluez/commit/173fad8fbe9f254ec1da51c793e9b5315610b16c
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
A doc/btmon-a2dp.rst
A doc/btmon-classic-audio.rst
M doc/btmon.rst
Log Message:
-----------
doc/btmon: Add A2DP/AVDTP protocol flow documentation
Add btmon-a2dp.rst documenting the A2DP protocol flow as seen in btmon
output, wrapped by btmon-classic-audio.rst parent file. Coverage
includes:
- AVDTP signaling: Discover, Get Capabilities, Set Configuration,
Open, Start, Suspend, Close
- Codec capability/configuration decoding for SBC, AAC, aptX, aptX HD,
aptX Low Latency, FastStream, LDAC, and Opus
- AVDTP media transport channel setup
- AVRCP control and browsing channel overview
- Delay Reporting
- Automation-friendly grep patterns
Commit: 097196bf8a299d209681892ea74618e4bea8c4ac
https://github.com/bluez/bluez/commit/097196bf8a299d209681892ea74618e4bea8c4ac
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: 2026-03-25 (Wed, 25 Mar 2026)
Changed paths:
M Makefile.am
M doc/btmon-classic-audio.rst
A doc/btmon-hfp.rst
Log Message:
-----------
doc/btmon: Add HFP protocol flow documentation
Add btmon-hfp.rst documenting the HFP protocol flow as seen in btmon
output. Coverage includes:
- SDP service discovery for Handsfree/AG UUIDs
- RFCOMM channel setup over L2CAP PSM 3 (SABM/UA, Parameter
Negotiation, Modem Status Command)
- AT command exchange for SLC setup (noted as hex dump only -- btmon
does not parse AT commands within RFCOMM UIH data frames)
- Codec negotiation via AT+BAC/AT+BCS
- SCO/eSCO synchronous connection setup (voice setting, coding format)
- Codec summary tables (AT-level vs HCI-level codec IDs)
- Automation-friendly grep patterns
Compare: https://github.com/bluez/bluez/compare/1436eab1d0e5...097196bf8a29
To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications
reply other threads:[~2026-03-25 20:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bluez/bluez/push/refs/heads/master/1436ea-097196@github.com \
--to=noreply@github.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox