linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: bugzilla-daemon@kernel.org
To: linux-bluetooth@vger.kernel.org
Subject: [Bug 218472] mt7921e bluetooth not working
Date: Sat, 24 Feb 2024 15:51:58 +0000	[thread overview]
Message-ID: <bug-218472-62941-Rag6B9u3L8@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-218472-62941@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=218472

--- Comment #7 from Chris (bugzilla@mail.cam-it.nl) ---
(In reply to jeremy from comment #6)
> You should post results from terminal for
> sudo cat /sys/kernel/debug/usb/devices| awk '/3585/' RS=
> 
> The bluetooth devs usually want that info.  I am guessing that you will need
> a kernel patch similar to
> https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git/
> commit/drivers/bluetooth/btusb.c?id=f0ad26ee822b197f2421462df9c358a5687fddfd
> but it would be at about line 610 of btusb.c and be
> 
>       { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
>                                                    BTUSB_WIDEBAND_SPEECH |
>                                                    BTUSB_VALID_LE_STATES },

Thanks Jeremy. I compiled btusb.c with that change and it works.
For completeness, here's the requested output of 
sudo cat /sys/kernel/debug/usb/devices| awk '/3585/' RS=

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3585 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.

  parent reply	other threads:[~2024-02-24 15:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-08 20:09 [Bug 218472] New: mt7921e bluetooth not working bugzilla-daemon
2024-02-10 13:09 ` [Bug 218472] " bugzilla-daemon
2024-02-10 13:34 ` bugzilla-daemon
2024-02-10 18:31 ` bugzilla-daemon
2024-02-10 19:24 ` bugzilla-daemon
2024-02-14 23:58 ` bugzilla-daemon
2024-02-24 11:52 ` bugzilla-daemon
2024-02-24 15:51 ` bugzilla-daemon [this message]
2024-03-24 10:59 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-218472-62941-Rag6B9u3L8@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).