From: bugzilla-daemon@kernel.org
To: linux-bluetooth@vger.kernel.org
Subject: [Bug 219233] New: Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-18-16-0.sfi (-2)
Date: Wed, 04 Sep 2024 10:42:35 +0000 [thread overview]
Message-ID: <bug-219233-62941@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=219233
Bug ID: 219233
Summary: Bluetooth: hci0: Failed to load Intel firmware file
intel/ibt-18-16-0.sfi (-2)
Product: Drivers
Version: 2.5
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: Bluetooth
Assignee: linux-bluetooth@vger.kernel.org
Reporter: ionut_n2001@yahoo.com
Regression: No
Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-18-16-0.sfi (-2)
[ 7.895675] Bluetooth: hci0: Failed to load Intel firmware file
intel/ibt-18-16-0.sfi (-2)
[ 7.896205] Bluetooth: hci0: Reading supported features failed (-56)
[ 7.898867] Bluetooth: hci0: Opcode 0x0c03 failed: -56
[ 7.899162] Bluetooth: hci0: Failed to read MSFT supported features (-56)
Kernel: 6.11.0-rc6
# lspci -s 04:00.00 -vvvvv
04:00.0 Network controller: Intel Corporation Wi-Fi 5(802.11ac) Wireless-AC
9x6x [Thunder Peak] (rev 29)
Subsystem: Intel Corporation Dual Band Wi-Fi 5 Wireless-AC 9260 160MHz
2x2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 138
IOMMU group: 5
Region 0: Memory at 91300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00598 Data: 0000
Capabilities: [40] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency
L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP-
LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB
preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-
EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI-X: Enable- Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP-
AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP-
PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP-
AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP-
PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP-
AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP-
PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [14c v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [154 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
L1_PM_Substates+
PortCommonModeRestoreTime=30us PortTPowerOnTime=18us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are the assignee for the bug.
next reply other threads:[~2024-09-04 10:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-04 10:42 bugzilla-daemon [this message]
2024-09-04 10:52 ` [Bug 219233] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-18-16-0.sfi (-2) bugzilla-daemon
2024-09-04 14:58 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-219233-62941@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox