From: "Chris Lu (陸稚泓)" <Chris.Lu@mediatek.com>
To: "pmenzel@molgen.mpg.de" <pmenzel@molgen.mpg.de>
Cc: "Will-CY Lee (李政穎)" <Will-CY.Lee@mediatek.com>,
"Steve Lee (李視誠)" <steve.lee@mediatek.com>,
"luiz.dentz@gmail.com" <luiz.dentz@gmail.com>,
"marcel@holtmann.org" <marcel@holtmann.org>,
"SS Wu (巫憲欣)" <ss.wu@mediatek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"johan.hedberg@gmail.com" <johan.hedberg@gmail.com>,
"Sean Wang" <Sean.Wang@mediatek.com>,
"linux-bluetooth@vger.kernel.org"
<linux-bluetooth@vger.kernel.org>,
"linux-mediatek@lists.infradead.org"
<linux-mediatek@lists.infradead.org>
Subject: Re: [PATCH v1 1/2] Bluetooth: btusb: Add new VID/PID 0489/e135 for MT7920
Date: Wed, 1 Oct 2025 07:31:05 +0000 [thread overview]
Message-ID: <c01095336878844585d70facd75964bb43391122.camel@mediatek.com> (raw)
In-Reply-To: <632b054e-2c67-4d6d-9e61-435d1566fc4d@molgen.mpg.de>
Dear Paul,
Thanks for your reply, I'll update v2 with the suggested message
changes.
Chris Lu
On Wed, 2025-10-01 at 08:17 +0200, Paul Menzel wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>
>
> Dear Chris,
>
>
> Thank you for your patch. In the summary *new* could be left out in
> the
> future. Maybe also put MT7920 in the front:
>
> Bluetooth: btusb: MT7920: Add VID:PID 0489:e135
>
>
> Am 01.10.25 um 08:04 schrieb Chris Lu:
> > Add VID 0489 & PID e135 for MediaTek MT7920 USB Bluetooth chip.
> >
> > The information in /sys/kernel/debug/usb/devices about the
> > Bluetooth
> > device is listed as the below.
> >
> > T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=0489 ProdID=e135 Rev= 1.00
> > S: Manufacturer=MediaTek Inc.
> > S: Product=Wireless_Device
> > S: SerialNumber=000000000
> > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01
> > Driver=(none)
> > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01
> > Driver=(none)
> > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> >
> > Signed-off-by: Chris Lu <chris.lu@mediatek.com>
> > ---
> > drivers/bluetooth/btusb.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 4be34c556db8..a2cde2284163 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -621,6 +621,8 @@ static const struct usb_device_id
> > quirks_table[] = {
> > /* Additional MediaTek MT7920 Bluetooth devices */
> > { USB_DEVICE(0x0489, 0xe134), .driver_info = BTUSB_MEDIATEK |
> >
> > BTUSB_WIDEBAND_SPEECH },
> > + { USB_DEVICE(0x0489, 0xe135), .driver_info = BTUSB_MEDIATEK |
> > +
> > BTUSB_WIDEBAND_SPEECH },
> > { USB_DEVICE(0x13d3, 0x3620), .driver_info = BTUSB_MEDIATEK |
> >
> > BTUSB_WIDEBAND_SPEECH },
> > { USB_DEVICE(0x13d3, 0x3621), .driver_info = BTUSB_MEDIATEK |
>
> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
>
>
> Kind regards,
>
> Paul
next prev parent reply other threads:[~2025-10-01 7:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-01 6:04 [PATCH v1 0/2] Add two new ID for MediaTek's Bluetooth Chris Lu
2025-10-01 6:04 ` [PATCH v1 1/2] Bluetooth: btusb: Add new VID/PID 0489/e135 for MT7920 Chris Lu
2025-10-01 6:17 ` Paul Menzel
2025-10-01 7:31 ` Chris Lu (陸稚泓) [this message]
2025-10-01 6:04 ` [PATCH v1 2/2] Bluetooth: btusb: Add new VID/PID 0489/e170 for MT7922 Chris Lu
2025-10-01 6:18 ` Paul Menzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c01095336878844585d70facd75964bb43391122.camel@mediatek.com \
--to=chris.lu@mediatek.com \
--cc=Sean.Wang@mediatek.com \
--cc=Will-CY.Lee@mediatek.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=pmenzel@molgen.mpg.de \
--cc=ss.wu@mediatek.com \
--cc=steve.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox