[Bluez-users] Re: pand freezes upon disconnect

[O Plameras <oscarp@acay.com.au>]

Bora wrote:
> Hello
> My bluetooth server is Slackware 9.1 and my client is WindowsXp.I 
> perfectly share the internet connection between them.My pand command 
> is 'pand -s -M --role NAP -z' , but when i close the connection from 
> windows, i see that slackware freezes.Any comments?
> 

I have a similar problem but my clients are Linux FC2. When I close
my connection from Linux clients the server has to be rebooted as it
freezes. I also tried shutdown the the following in sequence and the
server also freezes.

ifconfig bnep0 down
ifconfig bnep1 down
brctl delif br0 bnep0
brctl delif bro bnep1
hciconfig hci0 down ................

My server is Fedora Core 2 with kernel-2.6.8.1-mm4. It is
also a bridge-router-firewall (firewall = www.shorewall.net).
I also tried patching my server with patch-2.6.8-mh2 with the
same results. Can anyone help ?

[root@compaq src]#hci0:   Type: USB
         BD Address: 00:10:60:A7:DD:45 ACL MTU: 192:8  SCO MTU: 64:8
         UP RUNNING PSCAN ISCAN
         RX bytes:1484873 acl:44063 sco:0 events:26226 errors:0
         TX bytes:5589996 acl:32995 sco:0 commands:29 errors:0
         Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
         Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
         Link policy: RSWITCH HOLD SNIFF PARK
         Link mode: ACCEPT MASTER
         Name: 'compaq.noy.com.au'
         Class: 0x000100
         Service Classes: Unspecified
         Device Class: Computer, Uncategorized
         HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP 
Subver: 0x20d
         Manufacturer: Cambridge Silicon Radio (10)

[root@compaq src]#brctl show
bridge name     bridge id               STP enabled     interfaces
br0             8000.00105a67f2a1       yes             eth0
                                                         eth1
                                                         bnep0
                                                         bnep1
[root@compaq src]#

My clients are Fedora Core 2 with kernel-2.6.8.1-mm4

I have:
bluez-sdp-1.5-1
bluez-pan-1.1-1
bluez-firmware-1.0
bluez-hcidump-1.12
bluez-hciemu-1.0
bluez-libs-2.10
bluez-pin-0.24
bluez-utils-2.10

in my server and clients.



-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users