From: Mathis <mathis_w@gmx.net>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Re: F8T001 version 1 and SuSE 9.2
Date: Sun, 30 Jan 2005 23:42:17 +0100 [thread overview]
Message-ID: <ctjnsv$58q$1@sea.gmane.org> (raw)
In-Reply-To: <1107121540.8384.23.camel@pegasus>
Marcel Holtmann schrieb:
> Hi,
>
>
>>T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
>>D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>>P: Vendor=0a5c ProdID=2033 Rev= 0.a0
>>C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
>>I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>>E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>>I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>>E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>>E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>
>
> this is the Broadcom 2033 dongle that needs a firmware download before
> it will work as H:2 dongle. You must install the bluez-firmware package
> and make sure that the bcm203x kernel driver is loaded. You can also
> call dmesg and check for an error message, because there must be one if
> the firmware isn't found.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
thanx, this information did help alot
Mathis
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-01-30 22:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-30 20:35 [Bluez-users] F8T001 version 1 and SuSE 9.2 Mathis
2005-01-30 20:49 ` Marcel Holtmann
2005-01-30 21:32 ` [Bluez-users] " Mathis
2005-01-30 21:45 ` Marcel Holtmann
2005-01-30 22:42 ` Mathis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='ctjnsv$58q$1@sea.gmane.org' \
--to=mathis_w@gmx.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox