From: "Ville Tervo" <vtervo@gmail.com>
To: "Marcel Holtmann" <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: Bluetooth 2.1 USB adapter!
Date: Wed, 1 Oct 2008 12:29:57 +0300 [thread overview]
Message-ID: <d7c444d50810010229o4df9b985q2d2ca579819b8bf7@mail.gmail.com> (raw)
In-Reply-To: <1222851981.11272.4.camel@violet.holtmann.net>
[-- Attachment #1: Type: text/plain, Size: 4273 bytes --]
Hi Marcel,
On Wed, Oct 1, 2008 at 12:06 PM, Marcel Holtmann <marcel@holtmann.org>wrote:
> Hi Ville,
>
> > I have A-link dongle with following records. This seems to require the
> > same quirk. Tested with v2.6.26-mh4 and btusb module.
> >
> > hci0: Type: USB
> > BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> > UP RUNNING
> > RX bytes:5385 acl:0 sco:0 events:70 errors:0
> > TX bytes:698 acl:0 sco:0 commands:48 errors:0
> > Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy: RSWITCH HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'null-0'
> > Class: 0x000100
> > Service Classes: Unspecified
> > Device Class: Computer, Uncategorized
> > HCI Ver: 2.1 (0x4) HCI Rev: 0x5111 LMP Ver: 2.1 (0x4) LMP
> > Subver: 0x420e
> > Manufacturer: Broadcom Corporation (15)
> >
> > hci0: Type: USB
> > BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> > Firmware 17.66 / 14
>
> can you give me the simple lsusb and /proc/bus/usb/devices for this one
> please.
Here you are. Note that this dongle is also shown as 2xHID device and usb
hub in addition to bluetooth device.
Relevant part of lsusb
---- clip ----
Bus 001 Device 066: ID 0a5c:2146 Broadcom Corp.
Bus 001 Device 065: ID 0a5c:4503 Broadcom Corp.
Bus 001 Device 064: ID 0a5c:4502 Broadcom Corp.
Bus 001 Device 063: ID 0a5c:4500 Broadcom Corp.
----- clip ---
relevant part of /proc/bus/usb/devices
---- clip ----
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 63 Spd=12 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4500 Rev= 1.00
S: Manufacturer=Broadcom
S: Product=BCM2046B1
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 94mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=63 Port=00 Cnt=01 Dev#= 64 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4502 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=02 Prnt=63 Port=01 Cnt=02 Dev#= 65 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4503 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=02 Prnt=63 Port=02 Cnt=03 Dev#= 66 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=2146 Rev= 2.73
S: Manufacturer=Broadcom Corp
S: Product=BCM92046DG-CL1ROM
S: SerialNumber=0002721615F9
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
---- clip ----
[-- Attachment #2: Type: text/html, Size: 5697 bytes --]
next prev parent reply other threads:[~2008-10-01 9:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-25 19:25 Bluetooth 2.1 USB adapter! Chris Rankin
2008-09-25 22:23 ` Marcel Holtmann
2008-09-25 21:00 ` Chris Rankin
2008-10-01 8:57 ` Ville Tervo
2008-10-01 9:06 ` Marcel Holtmann
2008-10-01 9:29 ` Ville Tervo [this message]
2008-09-25 23:27 ` Marcel Holtmann
2008-09-25 21:59 ` Chris Rankin
2008-09-27 0:11 ` Bastien Nocera
2008-09-27 10:54 ` Chris Rankin
2008-09-30 5:43 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7c444d50810010229o4df9b985q2d2ca579819b8bf7@mail.gmail.com \
--to=vtervo@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox